Author: Opeyemi Oluseyi AfolabiPublisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Phase and Partitioning Behavior of Phenols and Polycyclic Aromatic Hydrocarbons in Offshore Oil and Gas Produced Water
Author: Opeyemi Oluseyi AfolabiStudy of Ecological Risk Assessment of Pahs and Phenols in Produced Water After Partitioning in the Water Phase
Author: Nahla MahmoudA Study of Methods Used to Analyze Total Oil and Polycyclic Aromatic Hydrocarbons in Produced Water
Author: Kerri Elizabeth BurtonPublisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Produced water is a by-product of offshore oil and gas production, and is released in large volumes when platforms are actively processing crude oil. Some pollutants are not typically removed by conventional oil/water separation methods and are discharged with produced water. Oil and grease can be found dispersed in produced water in the form of tiny droplets, and polycyclic aromatic hydrocarbons (PAHs) are commonly found dissolved in produced water. Both can have acute and chronic toxic effects in marine environments even at low exposure levels. The analysis of the dissolved and dispersed phases are a priority, but effort is required to meet the necessary detection limits. There are several methods for the analysis of produced water for dispersed oil and dissolved PAHs, all of which have advantages and disadvantages. In this work, EPA Method 1664 and APHA Method 5520 C for the determination of oil and grease will be examined and compared. For the detection of PAHs, EPA Method 525 and PAH MIPs will be compared, and results evaluated. APHA Method 5520 C Partition-Infrared Method is a liquid-liquid extraction procedure with IR determination of oil and grease. For analysis on spiked samples of artificial seawater, extraction efficiency ranged from 85 - 97%. Linearity was achieved in the range of 5 - 500 mg/L. This is a single-wavelength method and is unsuitable for quantification of aromatics and other compounds that lack sp3-hybridized carbon atoms. EPA Method 1664 is the liquid-liquid extraction of oil and grease from water samples followed by gravimetric determination. When distilled water spiked with reference oil was extracted by this procedure, extraction efficiency ranged from 28.4 - 86.2%, and %RSD ranged from 7.68 - 38.0%. EPA Method 525 uses solid phase extraction with analysis by GC-MS, and was performed on distilled water and water from St. John's Harbour, all spiked with naphthalene, fluorene, phenanthrene, and pyrene. The limits of detection in harbour water were 0.144, 3.82, 0.119, and 0.153 g/L respectively. Linearity was obtained in the range of 0.5-10 g/L, and %RSD ranged from 0.36% (fluorene) to 46% (pyrene). Molecularly imprinted polymers (MIPs) are sorbent materials made selective by polymerizing functional monomers and crosslinkers in the presence of a template molecule, usually the analytes of interest or related compounds. They can adsorb and concentrate PAHs from aqueous environments and are combined with methods of analysis including GC-MS, LC-UV-Vis, and desorption electrospray ionization (DESI)- MS. This work examines MIP-based methods as well as those methods previously mentioned which are currently used by the oil and gas industry and government environmental agencies. MIPs are shown to give results consistent with other methods, and are a low-cost alternative improving ease, throughput, and sensitivity. PAH MIPs were used to determine naphthalene spiked into ASTM artificial seawater, as well as produced water from an offshore oil and gas operation. Linearity was achieved in the range studied (0.5 - 5 mg/L) for both matrices, with R2 = 0.936 for seawater and R2 = 0.819 for produced water. The %RSD for seawater ranged from 6.58 - 50.5% and for produced water, from 8.19 - 79.6%.
Toxicological Profile for Polycyclic Aromatic Hydrocarbons
Author: Publisher:
ISBN:
Category : Polycyclic aromatic hydrocarbons
Languages : en
Pages : 500
Book Description
Removal of Polycyclic Aromatic Hydrocarbons from Offshore Produced Water by Advanced Oxidation Technologies
Author: Jisi ZhengPublisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
As the largest waste stream from offshore oil and gas industry, offshore produced water contains dissolved toxic organic pollutants that are hard to be removed by conventional wastewater treatment technologies. Among those pollutants, polycyclic aromatic hydrocarbons (PAHs) are of growing concern due to their high toxicity and persistence in the marine and coastal environments. Removal of PAHs from produced water before disposal is thus essential for offshore oil and gas production. However, the offshore operation and facilities (e.g., platforms and ships) usually have many special technical and economic constraints that limit the applications of many treatment technologies. Since advanced oxidation processes (AOPs) are featured with high cost-efficiency, small footprints, and eco-friendliness which well match with the requirements of offshore operation and present a promising treatment option for offshore wastewater (e.g., produced water). However, limited research efforts have been reported in investigating AOPs' mechanisms, performance and applicability in treating offshore produced water. In order to help fill the knowledge and technical gaps, this research aimed at development of advanced oxidation technologies for removal of PAHs from offshore produced water treatment and examination of the oxidation processes and kinetics, and effluent toxicity and biodegradability. To ensure efficient, reliable, and acurate analysis results, a refined analytical method, Vortex and Shaker Assisted Liquid-liquid Microextraction (VSA-LLME), was first developed, tested and adopted in the analysis of 16 priority PAHs recommended by U.S. Environmental Protection Agency. Under the optimized condition, the enrichment factors ranged from 68 to 78. The recoveries of the method were 74 to 85%, and the limits of detection were as low as 2 to 5 ng/L. The linearity results (R2 values) for 16 PAHs were all above 0.99 with the relative standard deviations (RSD%) of 6 to 11%. This method also creatively utilized the organic constitutes in produced water as dispersive solvents to reduce the solvent consumption. Its straightforward procedure and excellent performance showed a strong potential for application in research and regulatory and industrial practice. The photolysis of 16 PAHs in offshore produced water was then thoroughly investigated in this research. The results indicated much more complex kinetics in the removal of PAHs from produced water than those in stilled water, mianly due to the complex chemical constitutions of the substrate. The experiment disclosed the unique mechanisms including direct photolysis, dynamic light screening, and radical induced organic synthesis. A novel kinetic model involving dynamic light screening was developed and approved to support the mechanism analysis, and a semi-empirical model was also established to simulate the photolysis process. The proposed mechanisms and kinetics not only helped answered some scientific questions but also showed strong practical significance for further AOP development and applications. The performance of ozonation in removing polycyclic aromatic hydrocarbons (PAHs) from offshore produced water (OPW) was studied. The experimental results showed that ozone dose had positive effect due to enhancement in ozone decomposition, and radical yield. On the other hand, the removal was suppressed at increased bubble size and pH, which may be attributed to the reduction of interfacial area as well as stronger radical scavenging effect, respectively. Microtox tests showed that the acute toxicity of OPW was reduced after ozonation, which was highly correlated with the removal of PAHs. Such reduction was inhibited at high ozone doses, possibly due to the formation of disinfection by-products via reactions with halogens. As compared to control, ozonated OPW had higher oxygen uptake and less organic residual after biodegradation, indicating more bioavailable organics were formed after ozonation. Results from this study can be used as good references for designing new or upgrading existing OPW treatment systems using ozonation. Based on the experimental results, the three major mechanisms affecting the PAHs removal through AOP treatment were proposed in the first time. Novel kinetic models based on the dynamic oxidant competitiveness was developed and validated. The model was able to simulate the oxidation processes, quantify the effects of different operational parameters. The testing result also indicated that insufficient treatment could lead to carcinogenetic by-products. On the other hand, proper advanced oxidation technologies could significantly increase biodegradability, showing strong potential of combining with conventional biological treatment in practice.
Produced Water
Author: Kenneth LeePublisher: Springer Science & Business Media
ISBN: 1461400465
Category : Technology & Engineering
Languages : en
Pages : 601
Book Description
A state-of-the-art review of scientific knowledge on the environmental risk of ocean discharge of produced water and advances in mitigation technologies. In offshore oil and gas operations, produced water (the water produced with oil or gas from a well) accounts for the largest waste stream (in terms of volume discharged). Its discharge is continuous during oil and gas production and typically increases in volume over the lifetime of an offshore production platform. Produced water discharge as waste into the ocean has become an environmental concern because of its potential contaminant content. Environmental risk assessments of ocean discharge of produced water have yielded different results. For example, several laboratory and field studies have shown that significant acute toxic effects cannot be detected beyond the "point of discharge" due to rapid dilution in the receiving waters. However, there is some preliminary evidence of chronic sub-lethal impacts in biota associated with the discharge of produced water from oil and gas fields within the North Sea. As the composition and concentration of potential produced water contaminants may vary from one geologic formation to another, this conference also highlights the results of recent studies in Atlantic Canada.
Hydrocarbon Phase Behavior
Author: Tarek H. AhmedPublisher: Butterworth-Heinemann
ISBN:
Category : Science
Languages : en
Pages : 440
Book Description
Polycyclic Aromatic Hydrocarbons
Author: Leif Krag RowlesPublisher:
ISBN:
Category : Lake sediments
Languages : en
Pages : 360
Book Description
Occurrence of Polycyclic Aromatic Hydrocarbons in Urban Streams as Assessed Using Semipermeable Membrane Devices, Dallas-Fort Worth Metropolitan Area, Texas
Author: J. Bruce MoringPublisher:
ISBN:
Category : Government publications
Languages : en
Pages : 2
Book Description
Author: