Performance Comparison of Transverse and Longitudinal Fractured Horizontal Wells Over Varied Reservoir Permeability PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Performance Comparison of Transverse and Longitudinal Fractured Horizontal Wells Over Varied Reservoir Permeability PDF full book. Access full book title Performance Comparison of Transverse and Longitudinal Fractured Horizontal Wells Over Varied Reservoir Permeability by Fen Yang. Download full books in PDF and EPUB format.
Author: Fen Yang Publisher: ISBN: Category : Gas reservoirs Languages : en Pages : 164
Book Description
"Since the first application in the mid-1980's, multiple fractured horizontal wells have proven to be an effective means of extracting hydrocarbons. These wells require careful consideration of wellbore orientation relative to the horizontal principle stress. Wellbore orientation can lead to transverse fractures which are perpendicular to the wellbore, or longitudinal fractures parallel the wellbore. Questions arise regarding whether one fracture orientation is consistently preferred over the other, or if certain conditions affect the choice. Historical work has examined the impact of horizontal wellbore azimuth in the Barnett and Marcellus Shale where public data was reviewed and statistical well analysis was conducted respectively. Comparison between transverse and longitudinal fracturing in moderate gas reservoirs has been performed with experimental study. This work includes both simulations and actual field cases studies. It compares transverse multiple fractured horizontal wells with longitudinal ones in terms of both well performance and economics. The study covers both gas and oil reservoirs and extends prior work to unconventional resources by extending the reservoir permeability to 0.00005 md. A range of reservoir permeability is identified for the preferable fracture configuration through simulations. Field production history of the Bakken, Barnett, Eagle Ford and Delaware formations are investigated and compared to the simulation results. In addition, this work analyzes the impact of fracture conductivity, lateral length, fracture half-length, completion method and hydrocarbon prices. The conclusions can be used as a reference in decision making on horizontal drilling and hydraulic fracturing for both unconventional and conventional resources"--Abstract, page iii.
Author: Fen Yang Publisher: ISBN: Category : Gas reservoirs Languages : en Pages : 164
Book Description
"Since the first application in the mid-1980's, multiple fractured horizontal wells have proven to be an effective means of extracting hydrocarbons. These wells require careful consideration of wellbore orientation relative to the horizontal principle stress. Wellbore orientation can lead to transverse fractures which are perpendicular to the wellbore, or longitudinal fractures parallel the wellbore. Questions arise regarding whether one fracture orientation is consistently preferred over the other, or if certain conditions affect the choice. Historical work has examined the impact of horizontal wellbore azimuth in the Barnett and Marcellus Shale where public data was reviewed and statistical well analysis was conducted respectively. Comparison between transverse and longitudinal fracturing in moderate gas reservoirs has been performed with experimental study. This work includes both simulations and actual field cases studies. It compares transverse multiple fractured horizontal wells with longitudinal ones in terms of both well performance and economics. The study covers both gas and oil reservoirs and extends prior work to unconventional resources by extending the reservoir permeability to 0.00005 md. A range of reservoir permeability is identified for the preferable fracture configuration through simulations. Field production history of the Bakken, Barnett, Eagle Ford and Delaware formations are investigated and compared to the simulation results. In addition, this work analyzes the impact of fracture conductivity, lateral length, fracture half-length, completion method and hydrocarbon prices. The conclusions can be used as a reference in decision making on horizontal drilling and hydraulic fracturing for both unconventional and conventional resources"--Abstract, page iii.
Author: Hrithu Vasudevan Publisher: ISBN: Category : Computational fluid dynamics Languages : en Pages : 104
Book Description
"Hydraulic fracturing of horizontal wells in unconventional reservoirs has become the dominant type of well completion performed in the United States. In very low permeability reservoirs (~.00001-.0001 mD), the wellbore is aligned with the minimum horizontal stress, and the completion includes multiple transverse fractures. These fractures may be placed with either open hole sleeve type completion systems (OHMS), or cased hole plug and perf systems (P-n-P). In slightly higher permeability reservoirs (1 to 10 mD) multiple longitudinal fractures have been found to be preferred to completions with transverse fractures. This study presents an evaluation of gas well productivity for both transverse and longitudinal fractured horizontal wells using CFD simulations. The first part of the work includes an evaluation of one and two transverse fractures, over reservoir permeability of 1, 10 and 100 mD. Results, given as fold of increase, are compared to the single transverse fracture model of Augustine (2011). The work includes a parametric study of fracture width, penetration ratio and vertical to horizontal permeability ratio on production rates. The second part of the study includes CFD simulations for a single longitudinal fracture, and compares productivity results of this fracture orientation to transverse fractures in the 1, 10 and 100 mD cases. Results of this study suggest OHMs completions outperform P-n-P completions. The results of the work also corroborate the findings of Yang (2015) and Kassim et al (2016) suggesting that longitudinal fractured wells perform better in the slightly higher permeability reservoirs (1-10 mD)"--Abstract, page iii.
Author: Rouzbeh G. Moghanloo Publisher: Gulf Professional Publishing ISBN: 0323905293 Category : Science Languages : en Pages : 498
Book Description
Unconventional Shale Gas Development: Lessons Learned gives engineers the latest research developments and practical applications in today’s operations. Comprised of both academic and corporate contributors, a balanced critical review on technologies utilized are covered. Environmental topics are presented, including produced water management and sustainable operations in gas systems. Machine learning applications, well integrity and economic challenges are also covered to get the engineer up-to-speed. With its critical elements, case studies, history plot visuals and flow charts, the book delivers a critical reference to get today’s petroleum engineers updated on the latest research and applications surrounding shale gas systems. Bridges the gap between the latest research developments and practical applications through case studies and workflow charts Helps readers understand the latest developments from the balanced viewpoint of academic and corporate contributors Considers environmental and sustainable operations in shale gas systems, including produced water management
Author: Guangwei Dong Publisher: ISBN: Category : Languages : en Pages :
Book Description
Multiple transverse fracturing along a horizontal well is a relatively new technology that is designed to increase well productivity by increasing the contact between the reservoir and the wellbore. For multiple transverse fractures, the performance of the well system is determined by three aspects: the inflow from the reservoir to the fracture, the flow from the fracture to the wellbore, and the inflow from the reservoir to the horizontal wellbore. These three aspects influence each other and combined, influence the wellbore outflow. In this study, we develop a model to effectively formulate the inter-relationships of a multi-fracture system. This model includes a reservoir model and a wellbore model. The reservoir model is established to calculate both independent and inter-fracture productivity index to quantify the contribution from all fractures on pressure drop of each fracture, by using the source functions to solve the single-phase gas reservoir flow model. The wellbore model is used to calculate the pressure distribution along the wellbore and the relationship of pressure between neighboring fractures, based on the basic pressure drop model derived from the mechanical energy balance. A set of equations with exactly the same number of fractures will be formed to model the system by integrating the two models. Because the equations are nonlinear, iteration method is used to solve them. With our integrated reservoir and wellbore model, we conduct a field study to find the best strategy to develop the field by hydraulic fracturing. The influence of reservoir size, horizontal and vertical permeability, well placement, and fracture orientation, type (longitudinal and transverse), number and distribution are completely examined in this study. For any specific field, a rigorous step-by-step procedure is proposed to optimize the field.
Author: Fellipe Vieira Magalhães Publisher: ISBN: Category : Languages : en Pages :
Book Description
In low-permeability gas reservoirs, horizontal wells have been used to increase the reservoir contact area, and hydraulic fracturing has been further extending the contact between wellbores and reservoirs. This thesis presents an approach to evaluate horizontal well performance for fractured or unfractured gas wells and a sensitivity study of gas well performance in a low permeability formation. A newly developed Distributed Volumetric Sources (DVS) method was used to calculate dimensionless productivity index for a defined source in a box-shaped domain. The unique features of the DVS method are that it can be applied to transient flow and pseudo-steady state flow with a smooth transition between the boundary conditions. In this study, I conducted well performance studies by applying the DVS method to typical tight sandstone gas wells in the US basins. The objective is to determine the best practice to produce horizontal gas wells. For fractured wells, well performance of a single fracture and multiple fractures are compared, and the effect of the number of fractures on productivity of the well is presented based on the well productivity. The results from this study show that every basin has a unique ideal set of fracture number and fracture length. Permeability plays an important role on dictating the location and the dimension of the fractures. This study indicated that in order to achieve optimum production, the lower the permeability of the formation, the higher the number of fractures.
Author: Mohamed Y. Soliman Publisher: McGraw Hill Professional ISBN: 125958562X Category : Technology & Engineering Languages : en Pages : 480
Book Description
Effectively Apply Modern Fracturing Methods in Horizontal Wells Improve productivity and maximize natural gas extraction using the practical information contained in this comprehensive guide. Written by world-renowned experts, Fracturing Horizontal Wells features complete details on the latest fracking tools and technologies. Illustrations, tables, and real-world examples are found throughout. Discover how to handle site selection and testing, build accurate simulations, and efficiently extract energy from horizontal sources, including shale formations. Environmental standards, regulatory compliance, and safety protocols are also included. Fracturing Horizontal Wells covers: • Fracture Stimulation of Horizontal Wells • Transitioning from Vertical to Horizontal Wellbores • Reservoir Engineering Aspects of Horizontal Wells • Reservoir Engineering Aspects of Fractured Horizontal Wells • Fracturing Horizontal Wells: Rock Mechanics Overview • Drilling of Horizontal Wells • Proppant and Proppant Transport • Fracture Diagnostic Testing • Interval Isolation • Horizontal Completion Fracturing Methods and Techniques • Use of Well Logging Measurements and Analysis for Fracturing Design • Fracture Treatment Diagnostics • Environmental Stewardship
Author: Ryan Sawyer Broussard Publisher: ISBN: Category : Languages : en Pages :
Book Description
In this work, I present the development of analytical solutions in the Laplace domain for a fully-penetrating, horizontal well producing at a constant flow rate or constant wellbore pressure in the center of a composite, cylindrical reservoir system with an impermeable outer boundary. The composite reservoir consists of two regions. The cylindrical region closest to the wellbore is stimulated, and the permeability within this region follows a power-law function of the radial distance from the wellbore. The unstimulated outer region has homogeneous reservoir properties. The current norm for successful stimulation of low permeability reservoir rocks is multi-stage hydraulic fracturing. The process of hydraulic fracturing creates thin, high permeability fractures that propagate deep into the reservoir, increasing the area of the rock matrix that is exposed to this low-resistance flow pathway. The large surface area of the high conductivity fracture is what makes hydraulic fracturing so successful. Unfortunately, hydraulic fracturing is often encumbered by problems such as high capital costs and a need for large volumes of water. Therefore, I investigate a new stimulation concept based upon the alteration of the permeability of a large volume around the producing well assembly from its original regime to that following a power-law function. I evaluate the effectiveness of the new concept by comparing it to conventional multi-stage hydraulic fracturing. The results of this investigation show that the power-law permeability reservoir (PPR) has a performance advantage over the multi-fractured horizontal treatment (MFH) only when the fracture conductivity and fracture half-length are small. Most importantly, the results demonstrate that the PPR can provide respectable flow rates and recovery factors, thus making it a viable stimulation concept for ultra-low permeability reservoirs, especially under conditions that may not be conducive to a conventional MHF treatment. The electronic version of this dissertation is accessible from http://hdl.handle.net/1969.1/149312
Author: Jie Zeng Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
Current analytical models for multi-fractured horizontal wells (MFHW) generally neglect reservoir heterogeneity, typical seepage characters of unconventional reservoir, partially penetrating fracture and various fracture damage mechanisms. In this thesis, three linear flow models have been developed to facilitate pressure and rate behavior analysis of shale, tight sand and unconventional reservoir with damaged fractures. These models are validated by comparing with KAPPA Ecrin and are more accurate than previous linear flow models in modeling partially penetrating cases. Field data are analyzed and results prove the reliability of these models. The first model is for heterogeneous shale reservoir with multiple gas transport mechanisms. It subdivides the reservoir into seven parts, namely, two upper/lower regions, two outer regions, two inner regions, and hydraulic fracture region. Fracture interference is simulated by locating a no-flow boundary between two adjacent fractures. The locations of these boundaries are determined based on the boundary's pressure to satisfy the no-flow assumption. Adsorption/desorption, gas slippage and diffusion effects are included for rigorous modeling of flow in shale. Sensitivity analysis results suggest that larger desorption coefficient causes smaller pressure and its derivative as a larger proportion of gas is desorbed in formation and contributes to productivity. The influences of other parameters, such as matrix II permeability, matrix block size, secondary fracture permeability, hydraulic fracture conductivity, and fracture pattern are also discussed. The second model is for heterogeneous tight sand reservoir with threshold pressure gradient (TPG). The linear flow sub-regions are the same as those of the first model. TPG and pressure drop within the horizontal wellbore are included. Simulation results suggest that TPG affects middle-late time behaviors. Greater TPG results in higher pressure drop and accelerates production decline. But this influence is marginal when TPG is small. Effects of other parameters, such as formation permeability, fracture length, conductivity, and wellbore storage are also investigated. The third model is for heterogeneous reservoir with various fracture damage. In this model, the following possible fracture damage situations are discussed: (1) choked fracture damage (2) partially propped fracture, (3) fracturing fluid leak-off damage, (4) dual or multiple damage effects. Simulation results indicate that choked frature damage influences early-mid time performance. Partially propped section within fracture dominates formation linear flow regime. Only severe matrix impairment near fracture face can have noticeable effects on pressure and rate response. A new parameter, skin factor ratio, is applied to describe the relative magnitude of multiple damage mechanisms. Reservoir heterogeneity and fracture damage make the pressure and rate behaviors deviate significantly from undamaged one but one can distinguish major damage mechanisms even in heterogeneous reservoir.
Author: Fen Yang
Author: Fen Yang
Author: Hrithu Vasudevan
Author: Rouzbeh G. Moghanloo
Author: Guangwei Dong
Author: Fellipe Vieira Magalhães
Author: Yue Zhu
Author: Baojiang Sun
Author: Mohamed Y. Soliman
Author: Ryan Sawyer Broussard
Author: Jie Zeng