Particle Flows in Pumped DIII-D Discharges PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Particle Flows in Pumped DIII-D Discharges PDF full book. Access full book title Particle Flows in Pumped DIII-D Discharges by . Download full books in PDF and EPUB format.
Author: Publisher: ISBN: Category : Languages : en Pages :
Book Description
The dynamics of particle flows in the DIII-D tokamak for two divertor configurations is considered. Fuel and intrinsic carbon impurity flows are analyzed using experimental data and 2D fluid plasma simulations. The flows in puff and pump experiments done in an open and a closed divertor geometry are described. It is shown that the flow of fuel particles is sensitive to divertor geometry. The pumping efficiency of the DIII-D cryopumps is a factor of 2 higher in a closed geometry than an open. The core refueling rate of an open divertor is a factor of 2 higher than that of a closed divertor. In contrast, the flow of impurity carbon particles is insensitive to divertor geometry. Both the core carbon content and the fraction of the carbon source which penetrates to the core is unchanged between an open and closed divertor. In addition, the core impurity content is found to be insensitive to the amplitude of gas puffing in the simulations.
Author: Publisher: ISBN: Category : Languages : en Pages :
Book Description
The dynamics of particle flows in the DIII-D tokamak for two divertor configurations is considered. Fuel and intrinsic carbon impurity flows are analyzed using experimental data and 2D fluid plasma simulations. The flows in puff and pump experiments done in an open and a closed divertor geometry are described. It is shown that the flow of fuel particles is sensitive to divertor geometry. The pumping efficiency of the DIII-D cryopumps is a factor of 2 higher in a closed geometry than an open. The core refueling rate of an open divertor is a factor of 2 higher than that of a closed divertor. In contrast, the flow of impurity carbon particles is insensitive to divertor geometry. Both the core carbon content and the fraction of the carbon source which penetrates to the core is unchanged between an open and closed divertor. In addition, the core impurity content is found to be insensitive to the amplitude of gas puffing in the simulations.
Author: Peter Kittel Publisher: Springer Science & Business Media ISBN: 1461525225 Category : Science Languages : en Pages : 2020
Book Description
The Albuquerque Convention Center was the venue for the 1993 Cryogenic Engineering Conference. The meeting was held jointly with the International Cryogenic Materials Conference. Walter F. Stewart, of Los Alamos National Laboratory, was conference chairman. Albuquerque is near Los Alamos National Laboratory which has been a significant contributor to the cryogenics community since the early days of the Manhattan Project. Albuquerque is also the home of the Air Force's Phillips Laboratory which has a lead role in developing cryocoolers. The program consisted of 322 CEC papers, more than a 30% increase from CEC-91 and 20% more than CEC-89. This was the largest number of papers ever submitted to the CEC. Of these, 249 papers are published here, in Volume 39 of Advances in Cryogenic Engineering. Once again the volume is published in two books. This volume includes a cumulative index for the CEC volumes from 1975-1993 (volumes 21,23,25,27,29,31,33,35,37, and 39 of Advances in Cryogenic Engineering). The first 20 volumes are indexed in Volume 20. A companion cumulative index for the ICMC volumes (volumes 22 through 40) appears in Volume 40. This is my first volume as editor. I would not have been able to have done it without the assistance of the many reviewers. Especially appreciated was the instruction manual left me by the previous editor, Ron Fast.
Author: Publisher: ISBN: Category : Languages : en Pages : 55
Book Description
DIII-D has successfully operated with an all-graphite first wall, including the first observations of VH-mode without boronization. A major goal of this, and other recent upgrades, was to control impurity influxes and hydrogenic fueling. Graphite tiles were carefully pre-conditioned, first by ex situ preparation and then by baking and helium glow conditioning. No deuterium or hydrogen was used until tokamak operation commenced. With the all graphite wall, both impurity and deuterium influxes during tokamak discharges were lower than previous boronized discharges; central nickel impurity line radiation, NiXXV and NiXXVI, was an order of magnitude lower than previous discharges during the ELM free beam heated phase. The effect of reduced particle fueling on plasma performance, particularly H- and VH-mode discharges, will be presented.
Author: Publisher: ISBN: Category : Languages : en Pages :
Book Description
In this paper, neutral particles in DIII-D are studied via their compression in the plenum and via particle exhaust. The compression of gas in the plena is examined in terms of the magnetic field configuration and wall conditions. DIII-D compression ratios are observed in the range from 1 to[ge] 1,000. Particle control ultimately depends on the exhaust of neutrals via plenum or wall pumping. Wall pumping or outgassing is calculated by means of a detailed particle balance throughout individual discharges, and its effect on particle control is discussed. It is demonstrated that particle control through wall conditioning leads to lower normalized densities. A two-region model shows that the gas compression ratio (C[sub div]= divertor plenum neutral pressure/torus neutral pressure) can be interpreted in relation to gas flows in the torus and divertor including the pumping speed of the plenum cryopumps, plasma pumping, and the pumping or outgassing of the walls.
Author: J. Watkins Publisher: ISBN: Category : Languages : en Pages : 1
Book Description
Recent experiments on DIII-D point to the importance of two factors in determining the rate at which deuterium particles can be pumped at the divertor target(s): (1) the divertor magnetic balance, i.e., the degree to which the divertor topology is single-null (SN) or double-null (DN), and (2) the direction of the of B x {del}B ion drift with respect to the X-point(s). Changes in divertor magnetic balance near the DN shape have a much stronger effect on the pumping rate at the inner divertor target(s) than on the pumping rate at the outer divertor target(s). The behavior in the particle pumping observed at the inner and outer divertor target(s) in the DN and near-DN shapes suggests a redistribution of particles that would be expected in the presence of B x {del}B and E x B ion particle drifts in the scrapeoff layer (SOL) and divertor(s).
Author: K. Herschbach Publisher: Newnes ISBN: 0444599738 Category : Technology & Engineering Languages : en Pages : 892
Book Description
The objective of the Symposium on Fusion Technology (SOFT) conference is to set the stage for the exchange of information on the design, construction, and operation of fusion experiments and the technology which is being developed for the next-step devices and for fusion reactors. These proceedings therefore present an up-to-date and throrough review of the state-of-the art in this dynamic field.
Author: Publisher: ISBN: Category : Languages : en Pages : 6
Book Description
The scrape-off layer (SOL) and divertor plasma in the DEEI-D tokamak has been modeled using the 2-D fluid code UEDGE. The resulting simulated plasmas are compared in detail with the numerous diagnostics available on the device. Good agreement is obtained between the experimental measurements and the simulations when relatively small values of the assumed anomalous perpendicular transport coefficients are used. We use a purely diffusive model for perpendicular transport, with transport coefficients which are constant in space. The value of each of these transport coefficients is varied in the simulation to match the measured upstream density and temperature profiles. The resulting plasma parameters are then compared with all other diagnostics which measure parameters at various poloidal locations in the SOL.
Author: 
Author: 
Author: Peter Kittel
Author: 
Author: 
Author: 
Author: 
Author: J. Watkins
Author: 
Author: K. Herschbach
Author: