Author: P. Buchhave
Publisher: Springer Science & Business Media
ISBN: 1489912711
Category : Science
Languages : en
Pages : 387
Book Description
The origin of optical methods for fluid flow investigations appears to be nontraceable. This is no matter for surprise. After all seeing provides the most direct and common way for humans to learn about their environment. But at the same time some of the most sophisticated methods for doing measurements in fluids are also based on light and often laser light. A very large amount of material has been published in this area over the last two decades. Why then another publication? Well, the field is still in a state of rapid development. It is characterised by the use of results and methods developed within very different areas like optical physics, spectroscopy, communication systems, electronics and computer science, mechanical engineering, chemical engineering and, of course, fluid dynamics. We are not aware of a book containing both introductory and more advanced material that covers the same material as presented here. The book is the result of a compilation and expansion of material presented at a summer school on Optical Diagnosticsfor Flow Processes,held at RiS0 National Laboratory and the Technical University of Denmark in September 1993. The aim of the course was to provide a solid background for understanding, evaluating, and using modem optical diagnostic methods, addressing Ph. D. students and researchers active in areas of fluid flow research. The disciplines represented by the participants ranged from atmospheric fluid dynamics to biomedicine.
Optical Diagnostics for Flow Processes
Author: P. Buchhave
Publisher: Springer Science & Business Media
ISBN: 1489912711
Category : Science
Languages : en
Pages : 387
Book Description
The origin of optical methods for fluid flow investigations appears to be nontraceable. This is no matter for surprise. After all seeing provides the most direct and common way for humans to learn about their environment. But at the same time some of the most sophisticated methods for doing measurements in fluids are also based on light and often laser light. A very large amount of material has been published in this area over the last two decades. Why then another publication? Well, the field is still in a state of rapid development. It is characterised by the use of results and methods developed within very different areas like optical physics, spectroscopy, communication systems, electronics and computer science, mechanical engineering, chemical engineering and, of course, fluid dynamics. We are not aware of a book containing both introductory and more advanced material that covers the same material as presented here. The book is the result of a compilation and expansion of material presented at a summer school on Optical Diagnosticsfor Flow Processes,held at RiS0 National Laboratory and the Technical University of Denmark in September 1993. The aim of the course was to provide a solid background for understanding, evaluating, and using modem optical diagnostic methods, addressing Ph. D. students and researchers active in areas of fluid flow research. The disciplines represented by the participants ranged from atmospheric fluid dynamics to biomedicine.
Publisher: Springer Science & Business Media
ISBN: 1489912711
Category : Science
Languages : en
Pages : 387
Book Description
The origin of optical methods for fluid flow investigations appears to be nontraceable. This is no matter for surprise. After all seeing provides the most direct and common way for humans to learn about their environment. But at the same time some of the most sophisticated methods for doing measurements in fluids are also based on light and often laser light. A very large amount of material has been published in this area over the last two decades. Why then another publication? Well, the field is still in a state of rapid development. It is characterised by the use of results and methods developed within very different areas like optical physics, spectroscopy, communication systems, electronics and computer science, mechanical engineering, chemical engineering and, of course, fluid dynamics. We are not aware of a book containing both introductory and more advanced material that covers the same material as presented here. The book is the result of a compilation and expansion of material presented at a summer school on Optical Diagnosticsfor Flow Processes,held at RiS0 National Laboratory and the Technical University of Denmark in September 1993. The aim of the course was to provide a solid background for understanding, evaluating, and using modem optical diagnostic methods, addressing Ph. D. students and researchers active in areas of fluid flow research. The disciplines represented by the participants ranged from atmospheric fluid dynamics to biomedicine.
Proceedings of the International Conference on Optical Methods in Flow & Particle Diagnostics
Author: Warren H. Stevenson
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 256
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 256
Book Description
Optical Diagnostics for Fluids, Solids, and Combustion
Handbook of Fluid Dynamics
Author: Richard W. Johnson
Publisher: CRC Press
ISBN: 1439849579
Category : Science
Languages : en
Pages : 1544
Book Description
Handbook of Fluid Dynamics offers balanced coverage of the three traditional areas of fluid dynamics—theoretical, computational, and experimental—complete with valuable appendices presenting the mathematics of fluid dynamics, tables of dimensionless numbers, and tables of the properties of gases and vapors. Each chapter introduces a different fluid dynamics topic, discusses the pertinent issues, outlines proven techniques for addressing those issues, and supplies useful references for further research. Covering all major aspects of classical and modern fluid dynamics, this fully updated Second Edition: Reflects the latest fluid dynamics research and engineering applications Includes new sections on emerging fields, most notably micro- and nanofluidics Surveys the range of numerical and computational methods used in fluid dynamics analysis and design Expands the scope of a number of contemporary topics by incorporating new experimental methods, more numerical approaches, and additional areas for the application of fluid dynamics Handbook of Fluid Dynamics, Second Edition provides an indispensable resource for professionals entering the field of fluid dynamics. The book also enables experts specialized in areas outside fluid dynamics to become familiar with the field.
Publisher: CRC Press
ISBN: 1439849579
Category : Science
Languages : en
Pages : 1544
Book Description
Handbook of Fluid Dynamics offers balanced coverage of the three traditional areas of fluid dynamics—theoretical, computational, and experimental—complete with valuable appendices presenting the mathematics of fluid dynamics, tables of dimensionless numbers, and tables of the properties of gases and vapors. Each chapter introduces a different fluid dynamics topic, discusses the pertinent issues, outlines proven techniques for addressing those issues, and supplies useful references for further research. Covering all major aspects of classical and modern fluid dynamics, this fully updated Second Edition: Reflects the latest fluid dynamics research and engineering applications Includes new sections on emerging fields, most notably micro- and nanofluidics Surveys the range of numerical and computational methods used in fluid dynamics analysis and design Expands the scope of a number of contemporary topics by incorporating new experimental methods, more numerical approaches, and additional areas for the application of fluid dynamics Handbook of Fluid Dynamics, Second Edition provides an indispensable resource for professionals entering the field of fluid dynamics. The book also enables experts specialized in areas outside fluid dynamics to become familiar with the field.
Combustings Flow Diagnostics
Author: D.F.G. Durão
Publisher: Springer Science & Business Media
ISBN: 9401125880
Category : Science
Languages : en
Pages : 566
Book Description
This book consists of papers prepared for and presented at a NATO sponsored Advanced Study Institute which was held in Montechoro, Portugal during the period 16-27 April, 1990. This Institute was attended by approximately ninety delegates from fifteen countries and followed from a related Institute held in Vimeiro, Portugal in 1987 (see the book entitled "Instrumentation for Combustion and Flow in Engines", edited by D. F. G. Dur~o, J. H. Whitelaw and P. O. Witzel. The purposes of the first Institute related closely to instrumentation for use in gas-turbine combustors and the cylinders of internal-combustion engines. These topics were also addressed in the second Institute, though in a manner which was wider ranging and chosen to demonstrate and explain the development and application of measurement methods to combusting flows in general. The papers contained in this boo~ were selected to provide the reader with a comprehensive and up-to-date view of the variety of experimental techniques available to measure in combusting flows. Included are discussions of their range and applicability, potential accuracy and ease of use. Thus, the first paper provides a brief overview and the second an indication of those aspects of combustion which should influence the choice of flow property to be measured and the technique to be used.
Publisher: Springer Science & Business Media
ISBN: 9401125880
Category : Science
Languages : en
Pages : 566
Book Description
This book consists of papers prepared for and presented at a NATO sponsored Advanced Study Institute which was held in Montechoro, Portugal during the period 16-27 April, 1990. This Institute was attended by approximately ninety delegates from fifteen countries and followed from a related Institute held in Vimeiro, Portugal in 1987 (see the book entitled "Instrumentation for Combustion and Flow in Engines", edited by D. F. G. Dur~o, J. H. Whitelaw and P. O. Witzel. The purposes of the first Institute related closely to instrumentation for use in gas-turbine combustors and the cylinders of internal-combustion engines. These topics were also addressed in the second Institute, though in a manner which was wider ranging and chosen to demonstrate and explain the development and application of measurement methods to combusting flows in general. The papers contained in this boo~ were selected to provide the reader with a comprehensive and up-to-date view of the variety of experimental techniques available to measure in combusting flows. Included are discussions of their range and applicability, potential accuracy and ease of use. Thus, the first paper provides a brief overview and the second an indication of those aspects of combustion which should influence the choice of flow property to be measured and the technique to be used.
Laser Diagnostics and Optical Measurement Techniques in Internal Combustion Engines
Author: Hua Zhao
Publisher: SAE International
ISBN: 0768077664
Category : Technology & Engineering
Languages : en
Pages : 373
Book Description
The increasing concern about CO2 emissions and energy prices has led to new CO2 emission and fuel economy legislation being introduced in world regions served by the automotive industry. In response, automotive manufacturers and Tier-1 suppliers are developing a new generation of internal combustion (IC) engines with ultra-low emissions and high fuel efficiency. To further this development, a better understanding is needed of the combustion and pollutant formation processes in IC engines. As efficiency and emission abatement processes have reached points of diminishing returns, there is more of a need to make measurements inside the combustion chamber, where the combustion and pollutant formation processes take place. However, there is currently no good overview of how to make these measurements. Based on the author’s previous SAE book, Engine Combustion Instrumentation and Diagnostics, this book focuses on laser-based optical techniques for combustion flows and in-cylinder measurements. Included are new chapters on optical engines and optical equipment, case studies, and an updated description of each technique. The purpose of this book is to provide, in one publication, an introduction to experimental techniques that are best suited for in-cylinder engine combustion measurements. It provides sufficient details for readers to set up and apply these techniques to IC engines and combustion flows.
Publisher: SAE International
ISBN: 0768077664
Category : Technology & Engineering
Languages : en
Pages : 373
Book Description
The increasing concern about CO2 emissions and energy prices has led to new CO2 emission and fuel economy legislation being introduced in world regions served by the automotive industry. In response, automotive manufacturers and Tier-1 suppliers are developing a new generation of internal combustion (IC) engines with ultra-low emissions and high fuel efficiency. To further this development, a better understanding is needed of the combustion and pollutant formation processes in IC engines. As efficiency and emission abatement processes have reached points of diminishing returns, there is more of a need to make measurements inside the combustion chamber, where the combustion and pollutant formation processes take place. However, there is currently no good overview of how to make these measurements. Based on the author’s previous SAE book, Engine Combustion Instrumentation and Diagnostics, this book focuses on laser-based optical techniques for combustion flows and in-cylinder measurements. Included are new chapters on optical engines and optical equipment, case studies, and an updated description of each technique. The purpose of this book is to provide, in one publication, an introduction to experimental techniques that are best suited for in-cylinder engine combustion measurements. It provides sufficient details for readers to set up and apply these techniques to IC engines and combustion flows.
Flowfield Modeling and Diagnostics
Author: Ashwani K. Gupta
Publisher: Taylor & Francis
ISBN: 9780856263286
Category : Crafts & Hobbies
Languages : en
Pages : 426
Book Description
First published in 2004. Routledge is an imprint of Taylor & Francis, an informa company.
Publisher: Taylor & Francis
ISBN: 9780856263286
Category : Crafts & Hobbies
Languages : en
Pages : 426
Book Description
First published in 2004. Routledge is an imprint of Taylor & Francis, an informa company.
Optical Diagnostics for Thin Film Processing
Author: Irving P. Herman
Publisher: Elsevier
ISBN: 0080538088
Category : Technology & Engineering
Languages : en
Pages : 815
Book Description
This volume describes the increasing role of in situ optical diagnostics in thin film processing for applications ranging from fundamental science studies to process development to control during manufacturing. The key advantage of optical diagnostics in these applications is that they are usually noninvasive and nonintrusive. Optical probes of the surface, film, wafer, and gas above the wafer are described for many processes, including plasma etching, MBE, MOCVD, and rapid thermal processing. For each optical technique, the underlying principles are presented, modes of experimental implementation are described, and applications of the diagnostic in thin film processing are analyzed, with examples drawn from microelectronics and optoelectronics. Special attention is paid to real-time probing of the surface, to the noninvasive measurement of temperature, and to the use of optical probes for process control. Optical Diagnostics for Thin Film Processing is unique. No other volume explores the real-time application of optical techniques in all modes of thin film processing. The text can be used by students and those new to the topic as an introduction and review of the subject. It also serves as a comprehensive resource for engineers, technicians, researchers, and scientists already working in the field. - The only volume that comprehensively explores in situ, real-time, optical probes for all types of thin film processing - Useful as an introduction to the subject or as a resource handbook - Covers a wide range of thin film processes including plasma etching, MBE, MOCVD, and rapid thermal processing - Examples emphasize applications in microelectronics and optoelectronics - Introductory chapter serves as a guide to all optical diagnostics and their applications - Each chapter presents the underlying principles, experimental implementation, and applications for a specific optical diagnostic
Publisher: Elsevier
ISBN: 0080538088
Category : Technology & Engineering
Languages : en
Pages : 815
Book Description
This volume describes the increasing role of in situ optical diagnostics in thin film processing for applications ranging from fundamental science studies to process development to control during manufacturing. The key advantage of optical diagnostics in these applications is that they are usually noninvasive and nonintrusive. Optical probes of the surface, film, wafer, and gas above the wafer are described for many processes, including plasma etching, MBE, MOCVD, and rapid thermal processing. For each optical technique, the underlying principles are presented, modes of experimental implementation are described, and applications of the diagnostic in thin film processing are analyzed, with examples drawn from microelectronics and optoelectronics. Special attention is paid to real-time probing of the surface, to the noninvasive measurement of temperature, and to the use of optical probes for process control. Optical Diagnostics for Thin Film Processing is unique. No other volume explores the real-time application of optical techniques in all modes of thin film processing. The text can be used by students and those new to the topic as an introduction and review of the subject. It also serves as a comprehensive resource for engineers, technicians, researchers, and scientists already working in the field. - The only volume that comprehensively explores in situ, real-time, optical probes for all types of thin film processing - Useful as an introduction to the subject or as a resource handbook - Covers a wide range of thin film processes including plasma etching, MBE, MOCVD, and rapid thermal processing - Examples emphasize applications in microelectronics and optoelectronics - Introductory chapter serves as a guide to all optical diagnostics and their applications - Each chapter presents the underlying principles, experimental implementation, and applications for a specific optical diagnostic
Inverse Problems in Global Flow Diagnostics
Author: Tianshu Liu
Publisher: Springer Nature
ISBN: 3031424743
Category : Technology & Engineering
Languages : en
Pages : 342
Book Description
This book describes unified image-based measurement methods (theories, numerical methods, and algorithms) to determine the important physical quantities of complex flows in engineering and natural systems, including velocity, pressure, temperature, heat transfer, and skin friction. It presents a systematical study of the inverse problems in global flow diagnostics in a unified framework of the variational formulations. The authors further illustrate the main physical quantities in fluid mechanics, including velocity, pressure, skin friction and surface heat flux, extracted from flow visualization images obtained in experiments and observations. The developed methods are applicable in various image-based flow measurements in diverse disciplines ranging from fluid mechanics/aerodynamics to plenary sciences.
Publisher: Springer Nature
ISBN: 3031424743
Category : Technology & Engineering
Languages : en
Pages : 342
Book Description
This book describes unified image-based measurement methods (theories, numerical methods, and algorithms) to determine the important physical quantities of complex flows in engineering and natural systems, including velocity, pressure, temperature, heat transfer, and skin friction. It presents a systematical study of the inverse problems in global flow diagnostics in a unified framework of the variational formulations. The authors further illustrate the main physical quantities in fluid mechanics, including velocity, pressure, skin friction and surface heat flux, extracted from flow visualization images obtained in experiments and observations. The developed methods are applicable in various image-based flow measurements in diverse disciplines ranging from fluid mechanics/aerodynamics to plenary sciences.
Animal Locomotion
Author: Graham Taylor
Publisher: Springer Science & Business Media
ISBN: 3642116337
Category : Science
Languages : en
Pages : 433
Book Description
The physical principles of swimming and flying in animals are intriguingly different from those of ships and airplanes. The study of animal locomotion therefore holds a special place not only at the frontiers of pure fluid dynamics research, but also in the applied field of biomimetics, which aims to emulate salient aspects of the performance and function of living organisms. For example, fluid dynamic loads are so significant for swimming fish that they are expected to have developed efficient flow control procedures through the evolutionary process of adaptation by natural selection, which might in turn be applied to the design of robotic swimmers. And yet, sharply contrasting views as to the energetic efficiency of oscillatory propulsion – especially for marine animals – demand a careful assessment of the forces and energy expended at realistic Reynolds numbers. For this and many other research questions, an experimental approach is often the most appropriate methodology. This holds as much for flying animals as it does for swimming ones, and similar experimental challenges apply – studying tethered as opposed to free locomotion, or studying the flow around robotic models as opposed to real animals. This book provides a wide-ranging snapshot of the state-of-the-art in experimental research on the physics of swimming and flying animals. The resulting picture reflects not only upon the questions that are of interest in current pure and applied research, but also upon the experimental techniques that are available to answer them.
Publisher: Springer Science & Business Media
ISBN: 3642116337
Category : Science
Languages : en
Pages : 433
Book Description
The physical principles of swimming and flying in animals are intriguingly different from those of ships and airplanes. The study of animal locomotion therefore holds a special place not only at the frontiers of pure fluid dynamics research, but also in the applied field of biomimetics, which aims to emulate salient aspects of the performance and function of living organisms. For example, fluid dynamic loads are so significant for swimming fish that they are expected to have developed efficient flow control procedures through the evolutionary process of adaptation by natural selection, which might in turn be applied to the design of robotic swimmers. And yet, sharply contrasting views as to the energetic efficiency of oscillatory propulsion – especially for marine animals – demand a careful assessment of the forces and energy expended at realistic Reynolds numbers. For this and many other research questions, an experimental approach is often the most appropriate methodology. This holds as much for flying animals as it does for swimming ones, and similar experimental challenges apply – studying tethered as opposed to free locomotion, or studying the flow around robotic models as opposed to real animals. This book provides a wide-ranging snapshot of the state-of-the-art in experimental research on the physics of swimming and flying animals. The resulting picture reflects not only upon the questions that are of interest in current pure and applied research, but also upon the experimental techniques that are available to answer them.