On the Face Stability of Shallow Tunnels in Sand PDF Download

Author: Ansgar Kirsch
Publisher: Logos Verlag Berlin GmbH
ISBN: 3832521496
Category : Technology & Engineering
Languages : en
Pages : 213

View

Book Description
Various models have been proposed for the prediction of the necessary support pressure at the face of a shallow tunnel. To assess their quality, the collapse of a tunnel face was modelled with small scale model tests at single gravity. The evolution of the failure mechanism and the development of the support force at the face in dry sand were investigated. The observed displacement patterns show a negligible influence of overburden on the extent and evolution of the failure zone. The latter is significantly influenced, though, by the initial density of the sand: in dense sand a chimney-wedge-type collapse mechanism developed, which propagated towards the soil surface. Initially loose sand did not show any development of a discrete collapse mechanism. The necessary support force was neither influenced by the overburden nor the initial density. A comparison with quantitative predictions by several theoretical models showed that the measured necessary support pressure is overestimated by most of the models. Only those by Vermeer/Ruse and Leca/Dormieux were able to predict the necessary support pressure on a 95 % confidence level. A three-dimensional finite element investigation of face stability served to assess the ability of two constitutive models, an elastoplastic Mohr-Coulomb and a hypoplastic model, to predict the necessary support pressure and the displacements at the tunnel face. The simulation of the small scale experiments revealed that the observed necessary support pressure and incremental displacements were predicted sufficiently well with both constitutive models.

Author: Wai-Fah Chen
Publisher: Elsevier
ISBN: 0444601066
Category : Science
Languages : en
Pages : 653

View

Book Description
Developments in Geotechnical Engineering, Volume 7: Limit Analysis and Soil Plasticity covers the theory and applications of limit analysis as applied to soil mechanics. Organized into 12 chapters, the book presents an introduction to the modern development of theory of soil plasticity and includes rock-like material. The first four chapters of the book describe the technique of limit analysis, beginning with the historical review of the subject and the assumptions on which it is based, and then covering various aspects of available techniques of limit analysis. The subsequent chapters deal with the applications of limit analysis to what may be termed "classical soil mechanics problems that include bearing capacity of footings, lateral earth pressure problems, and stability of slopes. In many cases, comparisons of limit analysis solution and conventional limit equilibrium and slip-like solutions are also presented. Other chapters deal with the advances in bearing-capacity problem of concrete blocks or rock and present theoretical and experimental results of various concrete bearing problems. The concluding chapter examines elastic-plastic soil and elastic-plastic-fracture models for concrete materials. This book is an ideal resource text to geotechnical engineers and soil mechanics researchers.

Author: Mohammed Elshafie
Publisher: CRC Press
ISBN: 1000818659
Category : Technology & Engineering
Languages : en
Pages : 2036

View

Book Description
GEOTECHNICAL ASPECTS OF UNDERGROUND CONSTRUCTION IN SOFT GROUND comprises a collection of 112 contributions presented at the Tenth International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, held in Cambridge, United Kingdom, 27-29th June 2022. This 2nd edition also includes four general reports on the symposium themes which give an overview of the papers submitted to the symposium, covered in four technical sessions. The symposium is the latest in a series which began in New Delhi in 1994, and was followed by symposia in London (1996), Tokyo (1999), Toulouse (2002), Amsterdam (2005), Shanghai (2008), Rome (2011), Seoul (2014) and Sao Paulo (2017). This symposium was organised by the Geotechnical Research Group at the University of Cambridge, under the auspices of the Technical Committee TC204 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). Geotechnical Aspects of Underground Construction in Soft Ground includes contributions from more than 25 countries on the research, design and construction of underground works in soft ground. The contributions cover the following themes: Field case studies Sensing technologies and monitoring for underground construction in soft ground Physical and numerical modelling of tunnels and deep excavations in soft ground Seismic response of underground infrastructure in soft ground Design and application of ground improvement for underground construction Ground movements, interaction with existing structures and mitigation measures Similar to previous editions, GEOTECHNICAL ASPECTS OF UNDERGROUND CONSTRUCTION IN SOFT GROUND represents a valuable source of reference on the current practice of analysis, design, and construction of tunnels and deep excavations in soft ground. The book is particularly aimed at academics and professionals interested in geotechnical and underground engineering.

Author: Vittorio Guglielmetti
Publisher: CRC Press
ISBN: 1134110561
Category : Technology & Engineering
Languages : en
Pages : 507

View

Book Description
Internationally, the mechanized excavation of tunnels has intensified in the last two decades, as the number of tunnels being constructed for subways and railway underpasses increases. The subject of mechanized tunnelling in urban areas has not previously received the attention that it deserves, despite there being specific hazards associated with the construction of tunnels in metropolitan areas, including poor ground conditions, water tables higher than the level of tunnels, and subsidence leading to damage to the existing structures on the surface. The application of technologies for achieving the stability of the tunnel and for minimizing surface settlement is described in this book. Accurate characterization of the ground; rigorous assessment and management of risk from design to maintenance; the correct choice of a tunnel boring machine and a plan for the advancement of the tunnel; specific excavation procedures and real-time monitoring of excavation parameters are all discussed in this thorough work.

Author: Klaas Jan Bakker
Publisher: CRC Press
ISBN: 9780415889131
Category : Technology & Engineering
Languages : en
Pages : 984

View

Book Description
A valuable source of reference on the current practices of analysis, design and construction of tunnels and underground structures in soft ground. This collection of reviewed papers covers a wide range of tunnelling practice, from deep excavations in Singapore to the construction of a new metro line in Barcelona. The international scope of the contributors makes this a truly comprehensive collection of work on the geotechnical aspects of soft ground excavation.

Author: Mohammed Elshafie
Publisher: CRC Press
ISBN: 1000421104
Category : Technology & Engineering
Languages : en
Pages : 1846

View

Book Description
Geotechnical Aspects of Underground Construction in Soft Ground comprises a collection of 112 papers, four general reports on the symposium themes, the Fujita Lecture, three Special Lectures and the Bright Spark Lecture presented at the Tenth International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, held in Cambridge, United Kingdom, 27-29 June 2022. The symposium is the latest in a series which began in New Delhi in 1994, and was followed by symposia in London (1996), Tokyo (1999), Toulouse (2002), Amsterdam (2005), Shanghai (2008), Rome (2011), Seoul (2014) and Sao Paulo (2017). This was organised by the Geotechnical Research Group at the University of Cambridge, under the auspices of the Technical Committee TC204 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). Geotechnical Aspects of Underground Construction in Soft Ground includes contributions from more than 25 countries on research, design and construction of underground works in soft ground. The contributions cover: Field case studies Sensing technologies and monitoring for underground construction in soft ground Physical and numerical modelling of tunnels and deep excavations in soft ground Seismic response of underground infrastructure in soft ground Design and application of ground improvement for underground construction Ground movements, interaction with existing structures and mitigation measures The general reports give an overview of the papers submitted to the symposium, covered in four technical sessions. The proceedings include the written version of the five invited lectures covering topics ranging from developments in geotechnical aspects of underground construction, tunnelling and groundwater interaction (short and long-term effects), the influence of earth pressure balance shield tunnelling on pre-convergence and segmental liner loading (field observations, modelling and implications on design). Similar to previous editions, Geotechnical Aspects of Underground Construction in Soft Ground represents a valuable source of reference on the current practice of analysis, design, and construction of tunnels and deep excavations in soft ground. The book is particularly aimed at academics and professionals interested in geotechnical and underground engineering.

Author: Hung Nguyen-Xuan
Publisher: Springer
ISBN: 9811071497
Category : Technology & Engineering
Languages : en
Pages : 1137

View

Book Description
This book provides an overview of state-of-the-art methods in computational engineering for modeling and simulation. This proceedings volume includes a selection of refereed papers presented at the International Conference on Advances in Computational Mechanics (ACOME) 2017, which took place on Phu Quoc Island, Vietnam on August 2-4, 2017. The contributions highlight recent advances in and innovative applications of computational mechanics. Subjects covered include: biological systems; damage, fracture and failure; flow problems; multiscale multiphysics problems; composites and hybrid structures; optimization and inverse problems; lightweight structures; computational mechatronics; computational dynamics; numerical methods; and high-performance computing. The book is intended for academics, including graduate students and experienced researchers interested in state-of-the-art computational methods for solving challenging problems in engineering.

Author: Sarah Springman
Publisher: CRC Press
ISBN: 0415592887
Category : Technology & Engineering
Languages : en
Pages : 1530

View

Book Description
This book results from the 7th ICPMG meeting in Zurich 2010 and covers a broad range of aspects of physical modelling in geotechnics, linking across to other modelling techniques to consider the entire spectrum required in providing innovative geotechnical engineering solutions. Topics presented at the conference: Soil – Structure – Interaction; Natural Hazards; Earthquake Engineering: Soft Soil Engineering; New Geotechnical Physical; Modelling Facilities; Advanced Experimental Techniques; Comparisons between Physical and Numerical Modelling Specific Topics: Offshore Engineering; Ground Improvement and Foundations; Tunnelling, Excavations and Retaining Structures; Dams and slopes; Process Modelling; Goenvironmental Modelling; Education

Author: David Chapman
Publisher: CRC Press
ISBN: 1498766455
Category : Technology & Engineering
Languages : en
Pages : 557

View

Book Description
Tunnelling provides a robust solution to a variety of engineering challenges. It is a complex process, which requires a firm understanding of the ground conditions as well as the importance of ground-structure interaction. This book covers the full range of areas related to tunnel construction required to embark upon a career in tunnelling. It also includes a number of case studies related to real tunnel projects, to demonstrate how the theory applies in practice. New features of this second edition include: the introduction of a case study related to Crossrail’s project in London, focussing on the Whitechapel and Liverpool Street station tunnels and including considerations of building tunnels in a congested urban area; and further information on recent developments in tunnel boring machines, including further examples of all the different types of machine as well as multi-mode machines. The coverage includes: Both hard-rock and soft-ground conditions Site investigation, parameter selection, and design considerations Methods of improving the stability of the ground and lining techniques Descriptions of the various main tunnelling techniques Health and safety considerations Monitoring of tunnels during construction Description of the latest tunnel boring machines Case studies with real examples, including Crossrail’s project in London Clear, concise, and heavily illustrated, this is a vital text for final-year undergraduate and MSc students and an invaluable starting point for young professionals and novices in tunnelling.

Author: Milton Kanji
Publisher: Springer Nature
ISBN: 3030294773
Category : Science
Languages : en
Pages : 753

View

Book Description
This book offers a practical reference guide to soft rock mechanics for engineers and scientists. Written by recognized experts, it will benefit professionals, contractors, academics, researchers and students working on rock engineering projects in the fields of civil engineering, mining and construction engineering. Soft Rock Mechanics and Engineering covers a specific subject of great relevance in Rock Mechanics – and one that is directly connected to the design of geotechnical structures under difficult ground conditions. The book addresses practical issues related to the geomechanical properties of these types of rock masses and their characterization, while also discussing advances regarding in situ investigation, safety, and monitoring of geotechnical structures in soft rocks. Lastly, it presents important case histories involving tunnelling, dam foundations, coal and open pit mines and landslides.