Numerical Analysis of Radio-frequency Sheath-plasma Interactions in the Ion Cyclotron Range of Frequencies PDF Download

Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Numerical Analysis of Radio-frequency Sheath-plasma Interactions in the Ion Cyclotron Range of Frequencies PDF full book. Access full book title Numerical Analysis of Radio-frequency Sheath-plasma Interactions in the Ion Cyclotron Range of Frequencies by Haruhiko Kohno. Download full books in PDF and EPUB format.

Numerical Analysis of Radio-frequency Sheath-plasma Interactions in the Ion Cyclotron Range of Frequencies

Numerical Analysis of Radio-frequency Sheath-plasma Interactions in the Ion Cyclotron Range of Frequencies PDF Author: Haruhiko Kohno
Publisher:
ISBN:
Category :
Languages : en
Pages : 191

Book Description
Electromagnetic plasma waves in the ion cyclotron range of frequencies (ICRF) are routinely used in magnetic fusion experiments to heat plasmas and drive currents. However, many experiments have revealed that wave energy losses in the plasma edge and at the wall are significant, and detected that the acceleration of ions into the walls due to the formation of radio-frequency (RF) sheaths is one of the root causes of this problem. Since the RF-enhanced sheaths have many undesirable effects, such as impurity production and hot spot generation, a predictive numerical tool is required to quantitatively evaluate these effects with complicated boundary shapes of tokamaks taken into account. In this thesis the numerical code that solves self-consistent RF sheath-plasma interactions in the scrape-off layer for ICRF heating is developed based on a nonlinear finite element technique and is applied to various problems in the one-dimensional (1D) and two-dimensional (2D) domains corresponding to simplified models for the poloidal plane of a tokamak. The present code solves for plasma waves based on the cold plasma model subject to the sheath boundary condition, in which the most important physics that happens in the sheath is captured without using the field quantities in the sheath. Using the developed finite element code, several new properties of the RF sheath plasma interactions are discovered. First, it is found in the 1D domain that multiple roots can be present due to the resonance of the propagating slow wave and its nonlinear interaction with the sheath. Second, sheath-plasma waves are identified in a 2D slab geometry, and it is proved in conjunction with an electrostatic 2D sheath mode analysis that the sheath-plasma wave only appears in the vicinity of the sheath surface if the plasma density is greater than the lower hybrid density, and its wavelength depends on various parameters. Third, as a consequence of the self-consistent interaction between the propagating slow wave and the sheath, it is shown that the electric field distribution pattern in the plasma smoothly varies along the magnetic field lines between the conducting-wall and quasi-insulating limits. In the numerical analysis employing the 2D domain whose scale is equivalent to the Alcator C-Mod device, it is demonstrated that the calculated sheath potential can reach the order of kV, which is sufficient to yield enhanced sputtering at the wall. In addition, it is shown that the sheath potential in the close vicinity of the antenna current strap can be insensitive to the direction of the background magnetic field in the RF sheath dominated regime. Further, it is found from a series of nonlinear calculations that the sheath potential sensitively varies depending on the plasma density and electron temperature, which is consistent with the scaling derived from the Child-Langmuir law and the definition of the RF sheath potential. Lastly, a new finite element approach, which is named the finite element wave-packet method, is developed for the purpose of solving for multiscale plasma waves in the tokamak poloidal plane accurately with reasonable computational cost. This method is established by combining the advantages of the finite element and spectral methods, so that important properties in the finite element method, such as the sparsity of the global matrix and the ease in satisfying the boundary conditions, are retained. The present scheme is applied to some illustrative 1D multiscale problems, and its accuracy improvement is demonstrated through comparisons with the conventional finite element method.

Numerical Analysis of Radio-frequency Sheath-plasma Interactions in the Ion Cyclotron Range of Frequencies

Numerical Analysis of Radio-frequency Sheath-plasma Interactions in the Ion Cyclotron Range of Frequencies PDF Author: Haruhiko Kohno
Publisher:
ISBN:
Category :
Languages : en
Pages : 191

Book Description
Electromagnetic plasma waves in the ion cyclotron range of frequencies (ICRF) are routinely used in magnetic fusion experiments to heat plasmas and drive currents. However, many experiments have revealed that wave energy losses in the plasma edge and at the wall are significant, and detected that the acceleration of ions into the walls due to the formation of radio-frequency (RF) sheaths is one of the root causes of this problem. Since the RF-enhanced sheaths have many undesirable effects, such as impurity production and hot spot generation, a predictive numerical tool is required to quantitatively evaluate these effects with complicated boundary shapes of tokamaks taken into account. In this thesis the numerical code that solves self-consistent RF sheath-plasma interactions in the scrape-off layer for ICRF heating is developed based on a nonlinear finite element technique and is applied to various problems in the one-dimensional (1D) and two-dimensional (2D) domains corresponding to simplified models for the poloidal plane of a tokamak. The present code solves for plasma waves based on the cold plasma model subject to the sheath boundary condition, in which the most important physics that happens in the sheath is captured without using the field quantities in the sheath. Using the developed finite element code, several new properties of the RF sheath plasma interactions are discovered. First, it is found in the 1D domain that multiple roots can be present due to the resonance of the propagating slow wave and its nonlinear interaction with the sheath. Second, sheath-plasma waves are identified in a 2D slab geometry, and it is proved in conjunction with an electrostatic 2D sheath mode analysis that the sheath-plasma wave only appears in the vicinity of the sheath surface if the plasma density is greater than the lower hybrid density, and its wavelength depends on various parameters. Third, as a consequence of the self-consistent interaction between the propagating slow wave and the sheath, it is shown that the electric field distribution pattern in the plasma smoothly varies along the magnetic field lines between the conducting-wall and quasi-insulating limits. In the numerical analysis employing the 2D domain whose scale is equivalent to the Alcator C-Mod device, it is demonstrated that the calculated sheath potential can reach the order of kV, which is sufficient to yield enhanced sputtering at the wall. In addition, it is shown that the sheath potential in the close vicinity of the antenna current strap can be insensitive to the direction of the background magnetic field in the RF sheath dominated regime. Further, it is found from a series of nonlinear calculations that the sheath potential sensitively varies depending on the plasma density and electron temperature, which is consistent with the scaling derived from the Child-Langmuir law and the definition of the RF sheath potential. Lastly, a new finite element approach, which is named the finite element wave-packet method, is developed for the purpose of solving for multiscale plasma waves in the tokamak poloidal plane accurately with reasonable computational cost. This method is established by combining the advantages of the finite element and spectral methods, so that important properties in the finite element method, such as the sparsity of the global matrix and the ease in satisfying the boundary conditions, are retained. The present scheme is applied to some illustrative 1D multiscale problems, and its accuracy improvement is demonstrated through comparisons with the conventional finite element method.

Radio Frequency Power in Plasmas: 13th Topical Conference

Radio Frequency Power in Plasmas: 13th Topical Conference PDF Author: Stefano Bernabei
Publisher: American Inst. of Physics
ISBN: 9781563968617
Category : Science
Languages : en
Pages : 526

Book Description
The biennial RF Conference covers all of the applications of radio frequency power to plasmas. Scientists from a large number of institutions worldwide presented papers related to theoretical and experimental subjects. Topics include: basic RF wave physics, fusion plasmas, plasma sources for material processing, and ionospheric and astrophysical RF interactions. Papers on the technical aspects of RF systems are also presented.

Numerical Calculations Related to the Rf Properties of the Plasma Sheath

Numerical Calculations Related to the Rf Properties of the Plasma Sheath PDF Author: John Milan Pavkovich
Publisher:
ISBN:
Category : Plasma (Ionized gases)
Languages : en
Pages : 206

Book Description
In many considerations of the rf properties of a finite plasma, the plasma is treated as a dielectric and the boundary conditions associated with an ordinary dielectric are applied. Although this approach works well at times, it is by no means a satisfactory approach to understanding the rf properties of the boundary. In this paper, a detailed rf theory of the sheath is presented. The complete collisionless Boltzmann equation is used to derive a linear integral equation for the rf electric field through the sheath. The analysis is one-dimensional. This integral equation is solved numerically for a semi-infinite uniform plasma bounded by a sheath defined by a parabolic dc potential. A Maxwellian distribution of velocities is assumed for all computations. The results show that it is reasonable to assume that the normal component of displacement is continuous but that extra waves are set up near the boundary which decay as one moves into the uniform plasma. These waves are somewhat like the cutoff waves excited in the neighborhood of a waveguide discontinuity and thus give rise to a sheath impedance. A pressure type theory is also presented. This theory is based on moments of the collisionless Boltzmann equation. The results do not agree very well with results of the more exact theory and thus it is concluded that this type of theory is rather unreliable. (Author).

Modelling of Plasma-antenna Coupling and Non-linear Radio Frequency Wave-plasma-wall Interactions in the Magnetized Plasma Device Under Ion Cyclotron Range of Frequencies

Modelling of Plasma-antenna Coupling and Non-linear Radio Frequency Wave-plasma-wall Interactions in the Magnetized Plasma Device Under Ion Cyclotron Range of Frequencies PDF Author: LingFeng Lu
Publisher:
ISBN:
Category :
Languages : en
Pages : 0

Book Description
Ion Cyclotron Resonant Heating (ICRH) by waves in 30-80MHz range is currently used in magnetic fusion plasmas. Excited by phased arrays of current straps at the plasma periphery, these waves exist under two polarizations. The Fast Wave tunnels through the tenuous plasma edge and propagates to its center where it is absorbed. The parasitically emitted Slow Wave only exists close to the launchers. How much power can be coupled to the center with 1A current on the straps? How do the emitted radiofrequency (RF) near and far fields interact parasitically with the edge plasma via RF sheath rectification at plasma-wall interfaces? To address these two issues simultaneously, in realistic geometry over the size of ICRH antennas, this thesis upgraded and tested the Self-consistent Sheaths and Waves for ICH (SSWICH) code. SSWICH couples self-consistently RF wave propagation and Direct Current (DC) plasma biasing via non-linear RF and DC sheath boundary conditions (SBCs) at plasma/wall interfaces. Its upgrade is full wave and was implemented in two dimensions (toroidal/radial). New SBCs coupling the two polarizations were derived and implemented along shaped walls tilted with respect to the confinement magnetic field. Using this new tool in the absence of SBCs, we studied the impact of a density decaying continuously inside the antenna box and across the Lower Hybrid (LH) resonance. Up to the memory limits of our workstation, the RF fields below the LH resonance changed with the grid size. However the coupled power spectrum hardly evolved and was only weakly affected by the density inside the box. In presence of SBCs, SSWICH-FW simulations have identified the role of the fast wave on RF sheath excitation and reproduced some key experimental observations. SSWICH-FW was finally adapted to conduct the first electromagnetic and RF-sheath 2D simulations of the cylindrical magnetized plasma device ALINE.

Radio Frequency Power Plasmas

Radio Frequency Power Plasmas PDF Author: Stephen J. Wukitch
Publisher: American Institute of Physics
ISBN:
Category : Science
Languages : en
Pages : 480

Book Description
In these proceedings of the April 2005 conference participants describe their current research in the theories, computations, and applications of radio frequency power in plasmas for fusion, space propulsion and material processing. Many of the papers describe solutions in tokamak geometries where phenomena to be modeled ranged from mm to tens of centimeters and self-consistent models of energetic particles and waves, with about half the papers describing work in ion cyclotron range of frequencies (ICRF). Other topics include lower hybrid ranges of frequencies, electron Bernstein ranges of frequencies, electron cyclotron ranges of frequencies and RF plasma applications. Annotation :2005 Book News, Inc., Portland, OR (booknews.com).

Plasma Science and Technology

Plasma Science and Technology PDF Author: Haikel Jelassi
Publisher: BoD – Books on Demand
ISBN: 1789852390
Category : Science
Languages : en
Pages : 330

Book Description
Usually called the "fourth state of matter," plasmas make up more than 99% of known material. In usual terminology, this term generally refers to partially or totally ionized gas and covers a large number of topics with very different characteristics and behaviors. Over the last few decades, the physics and engineering of plasmas was experiencing a renewed interest, essentially born of a series of important applications such as thin-layer deposition, surface treatment, isotopic separation, integrated circuit etchings, medicine, etc. Plasma Science

Advancements in Langmuir Probe Diagnostic for Measurements in RF Sheath and in Modelling of the ICRF Slow Wave

Advancements in Langmuir Probe Diagnostic for Measurements in RF Sheath and in Modelling of the ICRF Slow Wave PDF Author: Mariia Usoltceva
Publisher:
ISBN:
Category :
Languages : en
Pages : 0

Book Description
Coupling power to the plasma with ion cyclotron range of frequencies (ICRF) waves is a promising method for heating tokamak plasmas to fusion relevant temperatures. For high efficiency, the ICRF antenna must be placed close to the plasma, but they enhance destructive plasma-wall interactions. Plasma ions accelerated by the electric field in the radio-frequency (RF) sheath have been found to be the main cause of these interactions. The ICRF antenna design could be optimized to reduce the observed effects. The physics of these effects can be studied on a simple specially designed experiment. Aline (A LINear Experiment) is a linear low-temperature plasma device. The machine is focused on plasma characterization with the Langmuir probe diagnostic. The presence of magnetic field changes completely the particle transport in plasma, therefore conventional methods of data analysis are not applicable. Especially it is true for a small cylindrical Langmuir probe parallel to the magnetic field or at a small angle to it. In this thesis theories are presented which were developed for Langmuir probe data processing for magnetized plasma. The first results are also presented, as well as a comparison to line-averaged densities by interferometry. Presented data analysis techniques are not only important for application on Aline but can be used on any machine with magnetized plasma. IShTAR (Ion cyclotron Sheath Test Arrangement) is closer to tokamak conditions than Aline because it has an ICRF antenna which mimics tokamak antennas. In the framework of this thesis the objective is to study comprehensively the ICRF wave propagation in IShTAR configuration. Probe diagnostics were employed to quantify the relevant plasma parameters and the relevant ICRF wave fields. Numerical simulations of the ICRF slow wave were done in COMSOL. Plasma was implemented as a material with manually assigned physical properties. Field structures obtained for the slow wave differ significantly from the other mode, fast wave, and exhibit strong dependence on the density profile on the plasma edge. The results of this thesis work contribute to the studies of the RF sheath physics on dedicated linear devices, as well as the physics of ICRF waves on the tokamak plasma edge in general. In ICRF simulations for tokamak devices the slow wave propagation on the edge is avoided. Results of this thesis can be used to improve the complex tokamak ICRF simulations.

Energy Research Abstracts

Energy Research Abstracts PDF Author:
Publisher:
ISBN:
Category : Power resources
Languages : en
Pages : 548

Book Description


Radio Frequency Power in Plasmas

Radio Frequency Power in Plasmas PDF Author: Donald B. Batchelor
Publisher: American Institute of Physics
ISBN:
Category : Science
Languages : en
Pages : 424

Book Description
The proceedings of the Ninth Topical Conference on [title], held in Charleston, SC, August 1991, comprise invited and contributed papers on topics in the areas of electron cyclotron range of frequencies, lower hybrid range of frequencies, ion cyclotron range of frequencies, current drive, RF technol

Computational Analysis of Ion Cyclotron Resonance Frequency Heating for JET Experiments

Computational Analysis of Ion Cyclotron Resonance Frequency Heating for JET Experiments PDF Author: Dani Gallart Escolà
Publisher:
ISBN:
Category :
Languages : en
Pages : 141

Book Description
Heating plasmas to a relevant fusion temperature is one of the key aspects of magnetically confined fusion plasmas. Radio frequency (RF) heating with electromagnetic waves in the ion cyclotron range of frequencies (ICRF) has been proven to be an efficient auxiliary method in present fusion devices such as tokamaks. Moreover, the International Thermonuclear Experimental Reactor (ITER) will be provided with ICRF antennas as one of the main heating mechanisms. For that, the study of different heating schemes to optimise the fusion performance is of utmost importance.During the 2015-2019 Joint European Torus (JET) campaigns many efforts have been devoted to the exploration of high-performance plasma scenarios envisaged for D-T operation in JET. Experiments in D, H and T are expected to lead in 2020 to the first experiments with 50%:50% D-T mixtures. These last campaigns at JET have been focused on enhancing the fusion performance of the baseline and hybrid scenarios with the final goal of improving ITER's future operation. This thesis reports on the modelling study of plasma heating through ICRF waves and NBI for recent experiments at JET with special emphasis on plasma performance.The modelling has been performed mainly with the ICRF code PION. Simulations are in excellent agreement with experimental results which proves the reliability of the results shown in this thesis. The assessment of the results offer an overview to understand and optimise plasma performance for high-performance hybrid discharges that were performed with D plasma and H minority. Impurity accumulation control with ICRF waves was found to be efficient only for a range of central resonance locations while impurity accumulation occurred for off-axis resonance. Contribution to temperature screening from fast ions was calculated to be negligible when finite orbit widths (FOW) are taken into account, as opposed to previous studies that did not take into account FOW. Small differences in H concentration have a large impact on power partition between H and D. The lower the H concentration the larger the power channeled to D which is shown to substantially enhance the D-D fusion rate. The study of a neutron record high-performance discharge shows high bulk ion heating and low H concentration as key ingredients for increased fusion performance.Of especial relevance for ITER is the study of the D-T prediction from high-performance discharges. This analysis compares two ICRF schemes, H and 3He minority. It is shown that 3He is a strong absorber and provides higher bulk ion heating as compared to H. However, ICRF fusion enhancement is computed to be larger in H, as this scheme has a stronger 2nd harmonic heating. In D-T, ICRF fusion enhancement is computed to be significantly lower with regards to D-D plasmas due to different fusion cross sections. Results in preparation of the T and D-T campaigns at JET show that the extrapolation from T to D-T plasmas is not straightforward. PION predicts the T density to have a large impact on the T velocity distribution function for the ITER relevant 2nd$ T harmonic heating scheme. Larger concentrations of T lead to higher bulk ion heating, therefore, it is expected D-T bulk ion heating to be lower.