Nonlinear Analysis of Steel Frames with Semi-rigid Connections Using the Capacity Spectrum Method PDF Download

Author:
Publisher:
ISBN:
Category : Structural analysis (Engineering)
Languages : en
Pages : 69

View

Book Description

Author: Siu-Lai Chan
Publisher: Elsevier
ISBN: 0080537715
Category : Technology & Engineering
Languages : en
Pages : 355

View

Book Description
This book is devoted to the discussion and studies of simple and efficient numerical procedures for large deflection and elasto-plastic analysis of steel frames under static and dynamic loading. In chapter 1, the basic fundamental behaviour and philosophy for design of structural steel is discussed, emphasising different modes of buckling and the inter-relationship between different types of analysis. In addition to this, different levels of refinement for non-linear analysis are described. An introduction is also given to the well-known P-&dgr; and P-&Dgr; effects. Chapter 2 presents the basic matrix method of analysis and gives several examples of linear analysis of semi-rigid pointed frames. It is evident from this that one must have a good understanding of first-order linear analysis before handling a second-order non-linear analysis. In chapter 3, the linearized bifurcation and second-order large deflection are compared and the detailed procedure for a second-order analysis based on the Newton-Raphson scheme is described. Chapter 4 introduces various solution schemes for tracing of post-buckling equilibrium paths and the Minimum Residual Displacement control method with arc-length load step control is employed for the post-buckling analysis of two and three dimensional structures. Chapter 5 addresses the non-linear behaviour and modelling of semi-rigid connections while several numerical functions for description of moment versus rotation curves of typical connection types are introduced. The scope of the work in chapter 6 covers semi-rigid connections and material yielding to the static analysis of steel frames. Chapter 7 studies the cyclic response of steel frames with semi-rigid joints and elastic material characteristics. In the last chapter the combined effects of semi-rigid connections and plastic hinges on steel frames under time-dependent loads are studied using a simple springs-in-series model. For computational effectiveness and efficiency, the concentrated plastic hinge concept is used throughout these studies.

Author: Shang-Hsien Hsieh
Publisher:
ISBN:
Category :
Languages : en
Pages : 468

View

Book Description

Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

View

Book Description
At the design stage, column-beam connections of steel structures are assumed as fully rigid or as hinges, and the design is completed with these assumptions. On the other hand, in practice, steel column-beam connections show neither fully rigid nor fully hinge behaviour, and the characteristic behaviour of the connections lies between these two special cases. Performing realistic calculation of these forces and knowing the behaviour of structures close to reality will decrease life and goods losses to the minimum level in a probable of earthquake to be encountered in the future. In this study, seismic performance of 2-D steel frames were evaluated by Capacity Spectrum Method proposed in the ATC 40 document published in 1996. A new computer program was developed in order to define all geometric and loading data and to perform nonlinear analysis of rigid and semi rigid steel frames for which the performances will be evaluated. In case studies, 3-Floor Steel Frames that have different bay numbers were investigated in various forms according to the rigid and different semi rigid connection types. In addition, the performances these frames for various seismic regions and soil conditions were compared. According to the results, it was observed that semi rigidly connected frames are under the effect of smaller ground acceleration have greater displacement values. As a consequence of this ductile and energy dissipative response, it was seen that the stresses in the members of frame become considerably small, relative to the stresses in the rigid frames’. Furthermore, the performances of semi-rigid frames can be affected negatively beyond such a low rigidity. Consequently, the most convenient design should be made according to the seismic and soil region where the structure to be constructed by performing the necessary studies on the connection details in order to achieve desired performance, serviceability and optimum member criteria.

Author: W.F. Chen
Publisher: CRC Press
ISBN: 1351077961
Category : Technology & Engineering
Languages : en
Pages : 398

View

Book Description
The development of the limit state approach to design in recent years has focused particular attention on two basic requirements: accurate information regarding the behavior of structures throughout the entire range of loading up to the ultimate strength, and simple practical procedures to enable engineers to assess this behavior. This book satisfies these requirements by providing practical analysis methods for the design of steel frames. The book contains a wide range of second-order analyses: from elastic to inelastic, rigid to semi-rigid connections, and simple plastic hinge method to sophisticated plastic-zone method. Computer programs for each analysis are provided in the form of a floppy disk for easy implementation. Sample problems are described and user's manuals are well documented for each program developed in the book.

Author: W. F. Chen
Publisher: John Wiley & Sons
ISBN: 9780471076704
Category : Technology & Engineering
Languages : en
Pages : 488

View

Book Description
Semi-rigid steel frames are revolutionizing structural design. This book is a practical professional reference, covering analytical methods for the evaluation of connection flexibility and its influence on the stability of the entire framework. The methods range from a simplified member-by-member design approach to a more sophisticated computer-based advanced analysis and design approach.

Author: Wai-Fah Chen
Publisher: World Scientific
ISBN: 9789810241384
Category : Technology & Engineering
Languages : en
Pages : 492

View

Book Description
This book summarizes the recent progress in practical analysis for semi-rigid frame design in North America. This encompasses codes, databases, modeling, classification, analysis/design, and design tables and aids. Practical design methods include LRFD procedures, approximate procedures, computer-based procedures and the optimization process. The book can be used as a supplementary steel design textbook for graduate students, as a training book for a short course in steel design for practicing engineers, and as a reference book for consulting firms designing building structures.

Author: Phu-Cuong Nguyen
Publisher: GRIN Verlag
ISBN: 3346878686
Category : Technology & Engineering
Languages : en
Pages : 188

View

Book Description
Doctoral Thesis / Dissertation from the year 2014 in the subject Engineering - Civil Engineering, grade: 9, , course: Advanced Steel Structures, language: English, abstract: This dissertation presents three various advanced analysis approaches which can capture accurately and efficiently the ultimate strength and behavior of steel framed structures with nonlinear beam-to-column connections subjected to static and dynamic loadings. Three major sources of nonlinearity are considered in the analyses as follows: (1) material nonlinearity; (2) geometric nonlinearity; and (3) connection nonlinearity. Three types of nonlinear beam-column element formulation considering both geometric and material nonlinearities are coded into two nonlinear structural analysis programs: (1) Nonlinear Structural Analysis Program (NSAP) – 2-D plastic-zone finite element; (2) Practical Advanced Analysis Program (PAAP) – 3-D refined plastic-hinge element and 3-D plastic-fiber element. Three types of steel frames analyzed by the proposed program are: (1) rigid frames – beam-to-column connections are fully rigid; (2) linear semi-rigid frames – beam-to-column connections have constant stiffness; and (3) nonlinear semi-rigid frames – beam-to-column connections have continuously variable stiffness. Three types of analysis can be performed are: (1) nonlinear inelastic static analysis; (2) nonlinear elastic and inelastic time-history analysis; and (3) free vibration analysis. Three main resources of damping are taken into account in the proposed programs are: (1) hysteretic damping due to inelastic material; (2) structural viscous damping employing Rayleigh damping; (3) hysteretic damping due to nonlinear beam-to-column connections. Two computer programs are developed: (1) Nonlinear Structural Analysis Program (NSAP) – written in the C++ programming language; (2) Practical Advanced Analysis Program (PAAP) – written in the FORTRAN 77 programming language. They are verified for accuracy and computational efficiency by comparing predicted results with those generated by the commercial finite element analysis packages of ABAQUS and SAP2000, and other results available in the literature. Through several numerical examples, the proposed program (PAAP) proves to be a reliable and efficient tool for daily practice design in lieu of using costly and time-consuming commercial software.

Author: Ali Abolmaali
Publisher:
ISBN:
Category : Building, Iron and steel
Languages : en
Pages : 604

View

Book Description

Author: Wai-Kai Chen
Publisher: CRC Press
ISBN: 1351085301
Category : Technology & Engineering
Languages : en
Pages : 395

View

Book Description
Stability Design of Steel Frames provides a summary of the behavior, analysis and design of structural steel members and frames with flexibly-jointed connections. The book presents the theory and design of structural stability and includes extensions of computer-based analyses for individual members in space with imperfections. It also shows how connection flexibility influences the behavior and design of steel frames and how designers must consider this in a limit-state analysis and design procedure. The clearly written text and extensive bibliography make this a practical book for advanced students, researchers and professionals in civil and structural engineering, as well as a useful supplement to traditional books on the theory and design of structural stability.