Nonlinear Finite Element Analysis of Composite and Reinforced Concrete Beams PDF Download

Author: Xiaoshan Lin
Publisher: Woodhead Publishing
ISBN: 0128169001
Category : Technology & Engineering
Languages : en
Pages : 258

View

Book Description
Nonlinear Finite Element Analysis of Composite and Reinforced Concrete Beams presents advanced methods and techniques for the analysis of composite and FRP reinforced concrete beams. The title introduces detailed numerical modeling methods and the modeling of the structural behavior of composite beams, including critical interfacial bond-slip behavior. It covers a new family of composite beam elements developed by the authors. Other sections cover nonlinear finite element analysis procedures and the numerical modeling techniques used in commercial finite element software that will be of particular interest to engineers and researchers executing numerical simulations. - Gives advanced methods and techniques for the analysis of composite and fiber Reinforced Plastic (FRP) and reinforced concrete beams - Presents new composite beam elements developed by the authors - Introduces numerical techniques for the development of effective finite element models using commercial software - Discusses the critical issues encountered in structural analysis - Maintains a clear focus on advanced numerical modeling

Author: P. Fajfar
Publisher: CRC Press
ISBN: 1851667644
Category : Architecture
Languages : en
Pages : 318

View

Book Description
Forty scientists working in 13 different countries detail in this work the most recent advances in seismic design and performance assessment of reinforced concrete buildings. It is a valuable contribution in the mitigation of natural disasters.

Author: Ermakova A.V.
Publisher: Издательство АСВ
ISBN: 5930938792
Category : Technology & Engineering
Languages : en
Pages : 114

View

Book Description
The work presents the theoretical basis of Additional Finite Element Method (AFEM), which is a variant of the Finite Element Method (FEM) for analysis of reinforced concrete structures at limit state. AFEM adds to the traditional sequence of problem by FEM the units of the two well-known methods of the structural design: method of additional loads and limit state method. The problem is solved by introduction of ideal failure models and additional design diagrams formed from additional finite elements, where each AFE describes the limit state reached by the main element. The main relations defining the properties of AFEs as well as the examples of the use of Additional Finite Element Method for analysis of reinforced concrete structures at limit state are given in the work too.

Author: K. Maekawa
Publisher: CRC Press
ISBN: 0203302885
Category : Architecture
Languages : en
Pages : 768

View

Book Description
This book describes the application of nonlinear static and dynamic analysis for the design, maintenance and seismic strengthening of reinforced concrete structures. The latest structural and RC constitutive modelling techniques are described in detail, with particular attention given to multi-dimensional cracking and damage assessment, and their practical applications for performance-based design. Other subjects covered include 2D/3D analysis techniques, bond and tension stiffness, shear transfer, compression and confinement. It can be used in conjunction with WCOMD and COM3 software Nonlinear Mechanics of Reinforced Concrete presents a practical methodology for structural engineers, graduate students and researchers concerned with the design and maintenance of concrete structures.

Author: fib - federation internationale du beton
Publisher: John Wiley & Sons
ISBN: 3433030618
Category : Technology & Engineering
Languages : de
Pages : 434

View

Book Description
The International Federation for Structural Concrete (fib) is a pre-normative organization. 'Pre-normative' implies pioneering work in codification. This work has now been realized with the fib Model Code 2010. The objectives of the fib Model Code 2010 are to serve as a basis for future codes for concrete structures, and present new developments with regard to concrete structures, structural materials and new ideas in order to achieve optimum behaviour. The fib Model Code 2010 is now the most comprehensive code on concrete structures, including their complete life cycle: conceptual design, dimensioning, construction, conservation and dismantlement. It is expected to become an important document for both national and international code committees, practitioners and researchers. The fib Model Code 2010 was produced during the last ten years through an exceptional effort by Joost Walraven (Convener; Delft University of Technology, The Netherlands), Agnieszka Bigaj-van Vliet (Technical Secretary; TNO Built Environment and Geosciences, The Netherlands) as well as experts out of 44 countries from five continents.

Author: Yu Huang
Publisher: Cambridge Scholars Publishing
ISBN: 152755354X
Category : Technology & Engineering
Languages : en
Pages : 305

View

Book Description
This book details the theory and applications of finite element (FE) modeling of post-tensioned (PT) concrete structures, and provides the updated MATLAB code (as of 2019). The challenge of modeling PT prestressed concrete structures lies in the treatment of the interface between the concrete and prestressing tendons. Using MATLAB, this study develops an innovative nonlinear FE formulation which incorporates contact techniques and engineering elements to considerably reduce the need of computational power. This FE formulation has the ability to simulate different PT frame systems with fully bonded, fully unbonded or partially bonded tendons, as well as actual sliding behavior and frictional effects in the tendons. It also allows for the accurate simulation of anchor seating loss.

Author: H. O. Madsen
Publisher: Courier Corporation
ISBN: 0486445976
Category : Science
Languages : en
Pages : 418

View

Book Description
Uncertainties about analytical models, fluctuations in loads, and variability of material properties contribute to the small but real probability of structure failures. This advanced engineering text describes methods developed to deal with stochastic aspects of structural behavior, providing a framework for evaluating, comparing, and combining stochastic effects. Starting with the general problem of consistent evaluation of the reliability of structures, the text proceeds to examination of the second-moment reliability index methods that describe failure in terms of one or more limit states. It presents first-order reliability methods for computation of failure probabilities for individual limit states and for systems; and it illustrates identification of the design parameters most affecting reliability. Additional subjects include a self-contained presentation of extreme-value theory and stochastic processes; stationary, evolutionary, and nonlinear aspects of stochastic response of structures; a stochastic approach to material fatigue damage and crack propagation; and stochastic models for several natural and manufactured loads.

Author: Horst Werkle
Publisher: Springer Nature
ISBN: 3030498409
Category : Science
Languages : en
Pages : 709

View

Book Description
The book introduces the basic concepts of the finite element method in the static and dynamic analysis of beam, plate, shell and solid structures, discussing how the method works, the characteristics of a finite element approximation and how to avoid the pitfalls of finite element modeling. Presenting the finite element theory as simply as possible, the book allows readers to gain the knowledge required when applying powerful FEA software tools. Further, it describes modeling procedures, especially for reinforced concrete structures, as well as structural dynamics methods, with a particular focus on the seismic analysis of buildings, and explores the modeling of dynamic systems. Featuring numerous illustrative examples, the book allows readers to easily grasp the fundamentals of the finite element theory and to apply the finite element method proficiently.

Author: Paulo B. Lourenço
Publisher: Taylor & Francis
ISBN: 1000563146
Category : Technology & Engineering
Languages : en
Pages : 272

View

Book Description
Existing structures represent a heterogeneous category in the global built environment as often characterized by the presence of archaic materials, damage and disconnections, uncommon construction techniques and subsequent interventions throughout the building history. In this scenario, the common linear elastic analysis approach adopted for new buildings is incapable of an accurate estimation of structural capacity, leading to overconservative results, invasive structural strengthening, added intervention costs, excessive interference to building users and possible losses in terms of aesthetics or heritage values. For a rational and sustainable use of the resources, this book deals with advanced numerical simulations, adopting a practical approach to introduce the fundamentals of Finite Element Method, nonlinear solution procedures and constitutive material models. Recommended material properties for masonry, timber, reinforced concrete, iron and steel are discussed according to experimental evidence, building standards and codes of practice. The examples examined throughout the book and in the conclusive chapter support the analyst’s decision-making process toward a safe and efficient use of finite element analysis. Written primarily for practicing engineers, the book is of value to students in engineering and technical architecture with solid knowledge in the field of continuum mechanics and structural design.

Author: Michael D. Kotsovos
Publisher: CRC Press
ISBN: 1498712312
Category : Technology & Engineering
Languages : en
Pages : 376

View

Book Description
A Powerful Tool for the Analysis and Design of Complex Structural ElementsFinite-Element Modelling of Structural Concrete: Short-Term Static and Dynamic Loading Conditions presents a finite-element model of structural concrete under short-term loading, covering the whole range of short-term loading conditions, from static (monotonic and cyclic) to