Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
As a part of the Pacific Northwest National Laboratory's Tritium Target Development Program, eleven tritium target rods were irradiated in the Advanced Test Reactor located at the Idaho National Engineering and Environmental Laboratory during 1991. Both nondestructive and destructive post-irradiation examination on all eleven rods was planned under the Tritium Target Development Program. Funding for the program was reduced in 1991 resulting in the early removal of the program experiments before reaching their irradiation goals. Post-irradiation examination was only performed on one of the irradiated rods at the Pacific Northwest National Laboratory before the program was terminated in 1992. On December 6, 1995, the Secretary of Energy announced the pursuit of the Commercial Light-Water Reactor option for producing tritium establishing the Tritium Target Qualification Program at the Pacific Northwest National Laboratory. This program decided to pursue nondestructive and destructive post-irradiation examination of the ten remaining rods from the previous program. The ten rods comprise three experiments. The Loop-1 experiment irradiated eight target rods in a loop configuration for 217 irradiation days. The other two rods were irradiated in two separate irradiation experiments, designated as S1 and B1 for 143 effective full-power days, but at different power levels. After the ten rods were transferred from the ATR Canal to the Hot Fuels Examination Facility, the following examinations were performed: (1) visual examination and photography; (2) neutron radiography; (3) axial gamma scanning; (4) contact profilometry measurement; (5) bow and length measurements; (6) rod puncture and plenum gas analysis/measurement of plenum gas quantity; (7) void volume determination; and (8) internal pressure determination. This report presents the data collected during these examinations.
Nondestructive Post-irradiation Examination of Loop-1, S1 and B1 Rods
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
As a part of the Pacific Northwest National Laboratory's Tritium Target Development Program, eleven tritium target rods were irradiated in the Advanced Test Reactor located at the Idaho National Engineering and Environmental Laboratory during 1991. Both nondestructive and destructive post-irradiation examination on all eleven rods was planned under the Tritium Target Development Program. Funding for the program was reduced in 1991 resulting in the early removal of the program experiments before reaching their irradiation goals. Post-irradiation examination was only performed on one of the irradiated rods at the Pacific Northwest National Laboratory before the program was terminated in 1992. On December 6, 1995, the Secretary of Energy announced the pursuit of the Commercial Light-Water Reactor option for producing tritium establishing the Tritium Target Qualification Program at the Pacific Northwest National Laboratory. This program decided to pursue nondestructive and destructive post-irradiation examination of the ten remaining rods from the previous program. The ten rods comprise three experiments. The Loop-1 experiment irradiated eight target rods in a loop configuration for 217 irradiation days. The other two rods were irradiated in two separate irradiation experiments, designated as S1 and B1 for 143 effective full-power days, but at different power levels. After the ten rods were transferred from the ATR Canal to the Hot Fuels Examination Facility, the following examinations were performed: (1) visual examination and photography; (2) neutron radiography; (3) axial gamma scanning; (4) contact profilometry measurement; (5) bow and length measurements; (6) rod puncture and plenum gas analysis/measurement of plenum gas quantity; (7) void volume determination; and (8) internal pressure determination. This report presents the data collected during these examinations.
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
As a part of the Pacific Northwest National Laboratory's Tritium Target Development Program, eleven tritium target rods were irradiated in the Advanced Test Reactor located at the Idaho National Engineering and Environmental Laboratory during 1991. Both nondestructive and destructive post-irradiation examination on all eleven rods was planned under the Tritium Target Development Program. Funding for the program was reduced in 1991 resulting in the early removal of the program experiments before reaching their irradiation goals. Post-irradiation examination was only performed on one of the irradiated rods at the Pacific Northwest National Laboratory before the program was terminated in 1992. On December 6, 1995, the Secretary of Energy announced the pursuit of the Commercial Light-Water Reactor option for producing tritium establishing the Tritium Target Qualification Program at the Pacific Northwest National Laboratory. This program decided to pursue nondestructive and destructive post-irradiation examination of the ten remaining rods from the previous program. The ten rods comprise three experiments. The Loop-1 experiment irradiated eight target rods in a loop configuration for 217 irradiation days. The other two rods were irradiated in two separate irradiation experiments, designated as S1 and B1 for 143 effective full-power days, but at different power levels. After the ten rods were transferred from the ATR Canal to the Hot Fuels Examination Facility, the following examinations were performed: (1) visual examination and photography; (2) neutron radiography; (3) axial gamma scanning; (4) contact profilometry measurement; (5) bow and length measurements; (6) rod puncture and plenum gas analysis/measurement of plenum gas quantity; (7) void volume determination; and (8) internal pressure determination. This report presents the data collected during these examinations.
Passive Nondestructive Assay of Nuclear Materials
Author: Doug Reilly
Publisher:
ISBN: 9780160327247
Category : Non-destructive testing
Languages : en
Pages : 700
Book Description
Publisher:
ISBN: 9780160327247
Category : Non-destructive testing
Languages : en
Pages : 700
Book Description
Report of the Presidential Commission on the Space Shuttle Challenger Accident
Author: DIANE Publishing Company
Publisher: DIANE Publishing
ISBN: 0788119125
Category :
Languages : en
Pages : 267
Book Description
Publisher: DIANE Publishing
ISBN: 0788119125
Category :
Languages : en
Pages : 267
Book Description
Introduction to the Mathematics of Medical Imaging
Author: Charles L. Epstein
Publisher: SIAM
ISBN: 9780898717792
Category : Mathematics
Languages : en
Pages : 794
Book Description
At the heart of every medical imaging technology is a sophisticated mathematical model of the measurement process and an algorithm to reconstruct an image from the measured data. This book provides a firm foundation in the mathematical tools used to model the measurements and derive the reconstruction algorithms used in most of these modalities. The text uses X-ray computed tomography (X-ray CT) as a 'pedagogical machine' to illustrate important ideas and its extensive discussion of background material makes the more advanced mathematical topics accessible to people with a less formal mathematical education. This new edition contains a chapter on magnetic resonance imaging (MRI), a revised section on the relationship between the continuum and discrete Fourier transforms, an improved description of the gridding method, and new sections on both Grangreat's formula and noise analysis in MR-imaging. Mathematical concepts are illuminated with over 200 illustrations and numerous exercises.
Publisher: SIAM
ISBN: 9780898717792
Category : Mathematics
Languages : en
Pages : 794
Book Description
At the heart of every medical imaging technology is a sophisticated mathematical model of the measurement process and an algorithm to reconstruct an image from the measured data. This book provides a firm foundation in the mathematical tools used to model the measurements and derive the reconstruction algorithms used in most of these modalities. The text uses X-ray computed tomography (X-ray CT) as a 'pedagogical machine' to illustrate important ideas and its extensive discussion of background material makes the more advanced mathematical topics accessible to people with a less formal mathematical education. This new edition contains a chapter on magnetic resonance imaging (MRI), a revised section on the relationship between the continuum and discrete Fourier transforms, an improved description of the gridding method, and new sections on both Grangreat's formula and noise analysis in MR-imaging. Mathematical concepts are illuminated with over 200 illustrations and numerous exercises.
Status of Accelerator Driven Systems Research and Technology Development
Author: International Atomic Energy Agency
Publisher: IAEA Tecdoc
ISBN: 9789201053152
Category : Science
Languages : en
Pages : 0
Book Description
One of the greatest challenges for nuclear energy is how to properly manage the highly radioactive waste generated during irradiation in nuclear reactors. Accelerator Driven Systems (ADSs) may offer new prospects and advantages for the transmutation of such high level nuclear waste. ADS or accelerator driven transmutation of waste (ATW) consists of a high power proton accelerator, a heavy metal spallation target that produces neutrons when bombarded by the high power beam, and a sub-critical core that is neutronically coupled to the spallation target. This publication provides a comprehensive state of the art of the ADS technology by representing the different ADS concepts proposed worldwide in the last 15 years, as well as the related R&D activities and demonstration initiatives carried out at national international level.
Publisher: IAEA Tecdoc
ISBN: 9789201053152
Category : Science
Languages : en
Pages : 0
Book Description
One of the greatest challenges for nuclear energy is how to properly manage the highly radioactive waste generated during irradiation in nuclear reactors. Accelerator Driven Systems (ADSs) may offer new prospects and advantages for the transmutation of such high level nuclear waste. ADS or accelerator driven transmutation of waste (ATW) consists of a high power proton accelerator, a heavy metal spallation target that produces neutrons when bombarded by the high power beam, and a sub-critical core that is neutronically coupled to the spallation target. This publication provides a comprehensive state of the art of the ADS technology by representing the different ADS concepts proposed worldwide in the last 15 years, as well as the related R&D activities and demonstration initiatives carried out at national international level.
Methods for Geochemical Analysis
Author: Philip A. Baedecker
Publisher:
ISBN:
Category : Analytical geochemistry
Languages : en
Pages : 192
Book Description
Analytical methods used in the Geologic Division laboratories of the U.S. Geological Survey for the inorganic chemical analysis of rock and mineral samples.
Publisher:
ISBN:
Category : Analytical geochemistry
Languages : en
Pages : 192
Book Description
Analytical methods used in the Geologic Division laboratories of the U.S. Geological Survey for the inorganic chemical analysis of rock and mineral samples.
Natural Circulation in Water Cooled Nuclear Power Plants
Author: International Atomic Energy Agency
Publisher: IAEA
ISBN:
Category : Business & Economics
Languages : en
Pages : 656
Book Description
Describes the state of knowledge of natural circulation in water cooled nuclear power plants and passive system reliability. The publication presents information on phenomena, models, predictive tools and experiments that currently support design and analysis of natural circulation systems, and highlights areas where additional research is needed.
Publisher: IAEA
ISBN:
Category : Business & Economics
Languages : en
Pages : 656
Book Description
Describes the state of knowledge of natural circulation in water cooled nuclear power plants and passive system reliability. The publication presents information on phenomena, models, predictive tools and experiments that currently support design and analysis of natural circulation systems, and highlights areas where additional research is needed.
The Performance Economy
Author: W. Stahel
Publisher: Springer
ISBN: 0230274900
Category : Business & Economics
Languages : en
Pages : 373
Book Description
This updated and revised edition outlines strategies and models for how to use technology and knowledge to improve performance, create jobs and increase income. It shows what skills will be required to produce, sell and manage performance over time, and how manual jobs can contribute to reduce the consumption of non-renewable resources.
Publisher: Springer
ISBN: 0230274900
Category : Business & Economics
Languages : en
Pages : 373
Book Description
This updated and revised edition outlines strategies and models for how to use technology and knowledge to improve performance, create jobs and increase income. It shows what skills will be required to produce, sell and manage performance over time, and how manual jobs can contribute to reduce the consumption of non-renewable resources.
X-Ray Equipment Maintenance and Repairs Workbook for Radiographers and Radiological Technologists
Author: Ian R. McClelland
Publisher: World Health Organization
ISBN: 9241591633
Category : Medical
Languages : en
Pages : 273
Book Description
The X-ray equipment maintenance and repairs workbook is intended to help and guide staff working with, and responsible for, radiographic equipment and installations in remote institutions where the necessary technical support is not available, to perform routine maintenance and minor repairs of equipment to avoid break downs. The book can be used for self study and as a checklist for routine maintenance procedures.
Publisher: World Health Organization
ISBN: 9241591633
Category : Medical
Languages : en
Pages : 273
Book Description
The X-ray equipment maintenance and repairs workbook is intended to help and guide staff working with, and responsible for, radiographic equipment and installations in remote institutions where the necessary technical support is not available, to perform routine maintenance and minor repairs of equipment to avoid break downs. The book can be used for self study and as a checklist for routine maintenance procedures.
Semiconductor Radiation Detectors
Author: Gerhard Lutz
Publisher: Springer
ISBN: 3540716793
Category : Technology & Engineering
Languages : en
Pages : 351
Book Description
Starting from basic principles, this book describes the rapidly growing field of modern semiconductor detectors used for energy and position measurement radiation. The author, whose own contributions to these developments have been significant, explains the working principles of semiconductor radiation detectors in an intuitive way. Broad coverage is also given to electronic signal readout and to the subject of radiation damage.
Publisher: Springer
ISBN: 3540716793
Category : Technology & Engineering
Languages : en
Pages : 351
Book Description
Starting from basic principles, this book describes the rapidly growing field of modern semiconductor detectors used for energy and position measurement radiation. The author, whose own contributions to these developments have been significant, explains the working principles of semiconductor radiation detectors in an intuitive way. Broad coverage is also given to electronic signal readout and to the subject of radiation damage.