Modelling Flexible AC Transmission Systems (FACTS) Devices on Weak Transmission Lines in the Nigerian Power Network PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Modelling Flexible AC Transmission Systems (FACTS) Devices on Weak Transmission Lines in the Nigerian Power Network PDF full book. Access full book title Modelling Flexible AC Transmission Systems (FACTS) Devices on Weak Transmission Lines in the Nigerian Power Network by Olalekan Olagunju. Download full books in PDF and EPUB format.
Author: Olalekan Olagunju Publisher: GRIN Verlag ISBN: 3346119998 Category : Technology & Engineering Languages : en Pages : 84
Book Description
Research Paper (postgraduate) from the year 2019 in the subject Electrotechnology, , language: English, abstract: The aim of the study is to model FACTS devices on weak transmission line in the Nigeria power network and consider their effect on the bus voltages, reactive and active power using genetic algorithm(GA) approach for loss minimization. The Nigeria 330KV existing network to be considered consist of nine (9) generating stations, thirty(30)Buses and forty one (41) transmission lines which will be modelled and simulated using Matlab Version 7.10. The study is limited to Nigeria 330kV existing power network with the focus on the comparison of the Bus voltages and power flow on the transmission lines when FACTS devices are incorporated and when the FACTS devices are not incorporated. Research Questions: For the realization of the objectives mentioned above and the aim, the following research questions were set as a guide: 1. What is the significant effect of FACTS devices on weak transmission lines? 2. Can FACTS device be used with genetic algorithm for optimization of power loss and improvement of the bus voltages? 3. What is the limitation of using just genetic algorithm without FACTS device for the optimization of power loss and the improvement of the bus voltages? This research work is divided into five chapters with each chapter buttressing more on minimization of power loss. The scope of the work , the objective and aim of the research work to be achieved is addressed in chapter one (1). Chapter two(2) focus on the literature review of other researchers on FACTS device in the improvement of the power network, the concept of FACTS device and the choice of FACTS device to be used was also addressed in chapter two (2) of this research work. Chapter three focus on the methodology used for this study. The simulation of the 330kV Nigeria power network was done on MATLAB /SIMULINK 7.5. Also the chapter three focused on the use of power flow analysis toolbox which is a collection of a written codes of m files that has a compatible interface with MATLAB to generate the load flow of the power network instead of using ETAP. The genetic algorithm was also discussed as an optimization tool deployed to optimize the losses on the transmission line. Chapter four focus on the research findings with possible explanation as to some of the result obtained. Finally chapter five talks about the conclusion of this research work and highlight some areas to explore in the future.
Author: Olalekan Olagunju Publisher: GRIN Verlag ISBN: 3346119998 Category : Technology & Engineering Languages : en Pages : 84
Book Description
Research Paper (postgraduate) from the year 2019 in the subject Electrotechnology, , language: English, abstract: The aim of the study is to model FACTS devices on weak transmission line in the Nigeria power network and consider their effect on the bus voltages, reactive and active power using genetic algorithm(GA) approach for loss minimization. The Nigeria 330KV existing network to be considered consist of nine (9) generating stations, thirty(30)Buses and forty one (41) transmission lines which will be modelled and simulated using Matlab Version 7.10. The study is limited to Nigeria 330kV existing power network with the focus on the comparison of the Bus voltages and power flow on the transmission lines when FACTS devices are incorporated and when the FACTS devices are not incorporated. Research Questions: For the realization of the objectives mentioned above and the aim, the following research questions were set as a guide: 1. What is the significant effect of FACTS devices on weak transmission lines? 2. Can FACTS device be used with genetic algorithm for optimization of power loss and improvement of the bus voltages? 3. What is the limitation of using just genetic algorithm without FACTS device for the optimization of power loss and the improvement of the bus voltages? This research work is divided into five chapters with each chapter buttressing more on minimization of power loss. The scope of the work , the objective and aim of the research work to be achieved is addressed in chapter one (1). Chapter two(2) focus on the literature review of other researchers on FACTS device in the improvement of the power network, the concept of FACTS device and the choice of FACTS device to be used was also addressed in chapter two (2) of this research work. Chapter three focus on the methodology used for this study. The simulation of the 330kV Nigeria power network was done on MATLAB /SIMULINK 7.5. Also the chapter three focused on the use of power flow analysis toolbox which is a collection of a written codes of m files that has a compatible interface with MATLAB to generate the load flow of the power network instead of using ETAP. The genetic algorithm was also discussed as an optimization tool deployed to optimize the losses on the transmission line. Chapter four focus on the research findings with possible explanation as to some of the result obtained. Finally chapter five talks about the conclusion of this research work and highlight some areas to explore in the future.
Author: Suman Bhowmick Publisher: CRC Press ISBN: 1498756212 Category : Technology & Engineering Languages : en Pages : 168
Book Description
Flexible AC Transmission Systems (FACTS): Newton Power-Flow Modeling of Voltage-Sourced Converter-Based Controllers introduces different voltage-sourced converter (VSC)-based FACTS controllers and VSC-based high-voltage direct current (VSC-HVDC) systems and their working principles, explaining how FACTS controllers exchange real and reactive power with systems. Subsequently, the book: Describes the Newton–Raphson method and its application for solving the power-flow problem Presents the Newton power-flow modeling of the static synchronous series compensator (SSSC), unified power-flow controller (UPFC), interline power-flow controller (IPFC), generalized unified power-flow controller (GUPFC), and static synchronous compensator (STATCOM), accommodating the practical device constraint limits (because of the unique modeling strategy, the existing Newton power-flow codes can be reused) Develops a unified Newton power-flow model of AC systems incorporating multiterminal VSC-HVDC systems with pulse-width modulation (PWM) control schemes, directly yielding the VSC modulation indices from the power-flow solution Provides numerous case studies for validation of Newton power-flow models, elaborating on the occurrences and checking of unrealistic power-flow solutions in isolated cases Includes detailed derivations of all the difficult formulae as well as solved problems on typical VSC-based FACTS controllers Flexible AC Transmission Systems (FACTS): Newton Power-Flow Modeling of Voltage-Sourced Converter-Based Controllers assumes at least an undergraduate-level understanding of engineering mathematics, network analysis, electrical machines, electrical power systems, and power electronics. Thus, the book provides a valuable reference for practitioners as well as senior-undergraduate and graduate students in electrical engineering and electrical power systems.
Author: Bjarne R. Andersen Publisher: Springer ISBN: 9783030353872 Category : Technology & Engineering Languages : en Pages : 1117
Book Description
This Green Book offers the outstanding expertise of CIGRE professionals about Flexible AC Transmission Systems (FACTS) in one concise handbook. FACTS are used to enhance AC power networks, by providing fast control of power flows and AC voltage and AC phase angles. They can be used to defer the need for additional power lines, by controlling the power flow on lines to achieve maximum utilisation of the existing lines, and/or by improving the power quality, e.g. when large disturbing loads are connected to the network. This Green Book on FACTS provides comprehensive information about the use of Power Electronics for AC system control and for Power Quality Improvement in its over 1000 pages. This book has been written by experts in the field, who come from Transmission System Operators, Network owners, manufacturers, and consultants in this field. This Green Book on FACTS covers a large range of topics in its 6 sections, as follows: AC Systems Characteristics, AC network control using conventional means and AC network control using FACTS Controllers Technical Descriptions of all current FACTS controllers, power electronic Topologies for FACTS, SVCs, STATCOM, TCSC and the UPFC and its variations Application Examples of all FACTS controllers, which include a description of controllers using saturation of iron as well as examples of all current FACTS controllers Planning and Procurement, including economic appraisals and cost benefit analysis, planning studies, environmental considerations, functional specifications Implementation of FACTS controllers, including integration and design studies, equipment design and testing and commissioning FACTS operation and lifetime management.
Author: Narain G. Hingorani Publisher: Wiley-IEEE Press ISBN: Category : Technology & Engineering Languages : en Pages : 460
Book Description
The Flexible AC Transmission System (FACTS)--a new technology based on power electronics--offers an opportunity to enhance controllability, stability, and power transfer capability of ac transmission systems. Two pioneers in the field provide in-depth discussions on power semiconductor devices, voltage-sourced and current-sourced converters, specific FACTS controllers, and major FACTS applications in the U.S.
Author: Hussain Beleed Publisher: ISBN: Category : Electric power distribution Languages : en Pages : 364
Book Description
This thesis explores the effects of inductive Distributed Flexible AC Transmission System (D-FACTS) device implementations on the performance of different transmission line protection schemes. The reliability and sensitivity of the trip decision of the protection elements is crucial for delivering safe and reliable power to customers. Furthermore, accurate fault location information can help significantly reduce outage duration, operating costs, and the number of consumer complaints. Inductive D-FACTS devices offer a distributed solution for managing and relieving the congestion in transmission lines. However, their interaction with protection and fault location elements may potentially cause unnecessary tripping, relay mis-operation, or misleading fault location information. The operation of these devices may also lead to unpredictable changes in transmission line impedance and fault current limitation due to their dynamic behavior before and during the disturbances. This work studies these negative aspects of D-FACTS devices and proposes solutions and alternatives to mitigate their impact.An inductive D-FACTS model was developed in the ATP version of the Electromagnetic Transients Program (EMTP) and then the steady-state performance of these devices was validated against the existing D-FACTS model in PowerWorld using the IEEE 12 bus test system. Once the model was validated, a more practical system with D-FACTS implementation is simulated using ATP. Lastly, the generated fault event files are played back into commercial relays and a protective relay software model for evaluation.This work examines the influence of two different implementations of inductive D-FACTS on the most common protection elements and schemes under different fault scenarios. The types of D-FACTS devices implementations studied were: dispersed (distributing the D-FACTS along the length of the line) and compressed (distributing them at specific distances on the line). Additionally, the impact of placing D-FACTS devices on adjacent lines was studied. Protection schemes studied in this thesis include distance elements (mho or quadrilateral elements), communication aided distance schemes (permissive overreaching transfer trip [POTT]), and fault location schemes. Furthermore, the influence of fault resistance and mutual coupling between parallel lines on relay response is studied in the presence of D-FACTS devices.Dispersed or compressed D-FACTS implementation can cause underreaching of distance elements. This may lead to a delay in the tripping time or in fact, a failure to trip in a POTT scheme. The simulation results show that using dispersed D-FACTS implementation can reduce the error compared to the compressed implementation, and increase the ability of performing correction for these devices under some operating conditions. This work also examined the effect of D-FACTS devices on distance elements' performance in presence of a fault resistance and mutual coupling between the parallel lines. The results illustrated how the direction of the power flow influences the fault resistance coverage of distance elements in the presence of D-FACTS devices. The D-FACTS may help to reduce the distance elements' underreach for forward faults and increase the underreach behavior for the reverse fault. The results show that mutual coupling influence on distance elements would be not impacted by addition of the D-FACTS devices.Lastly, we investigated how implementing inductive D-FACTS devices on the adjacent line affects the dynamic behavior of mho distance elements and the calculated effective impedance tilt of quadrilateral distance elements' response. Inserting the D-FACTS behind the relay can help expand the mho circles for forward faults and contract them for reverse faults. As a result, fault resistance coverage can be improved. On the other hand, this may cause underreaching or overreaching of the quadrilateral distance elements' response when a fault resistance is present in a ground fault.To deal with the challenges in the implementation of D-FACTS devices and minimize their influence on transmission line protection system performance, this thesis proposes mitigation for creating reliable protection and fault location schemes. The work concludes by offering recommendations for D-FACTS device implementation and protective relays' settings.