Physical Modelling in Geotechnics, Volume 2 PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Physical Modelling in Geotechnics, Volume 2 PDF full book. Access full book title Physical Modelling in Geotechnics, Volume 2 by Andrew McNamara. Download full books in PDF and EPUB format.
Author: Andrew McNamara Publisher: CRC Press ISBN: 0429797621 Category : Technology & Engineering Languages : en Pages : 735
Book Description
Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 2 of a 2-volume set.
Author: Katherine Dewey Publisher: Potter Craft ISBN: 0770434657 Category : Crafts & Hobbies Languages : en Pages : 146
Book Description
Katherine Dewey's expressive and elegantly detailed sculptures enchant all who see them. With the magical medium of polymer clay and this book, you can follow in her footsteps. Thorough instructions supported by more than 400 step-by-step color photos and 200 detailed drawings cover the entire process of sculpting realistic figures, from selecting clay and gathering essential tools to the basics of modeling the human figure, to incorporating poses, facial expressions, ethnic and gender subtleties, costumes, and painted finishing touches. Easy-to-read maps of the figure illustrate the landmarks of the body, while scale diagrams indicate the simple shapes hidden within the human form, as well as how to combine and model those shapes. For anyone who loves fantasy, romance, nature—or sophisticated crafting—this book is a must-have.
Author: Philippe Faraut Publisher: ISBN: 9780997581614 Category : Figure sculpture Languages : en Pages : 239
Book Description
Volume 2 of this series addresses issues that arise after the fundamental skills of modeling anatomy have been grasped. Written for the 3D artist, whether digital or traditional, techniques for applying gesture and drapery to enhance and bring life to sculptures of the human form are discussed referencing more than 100 of Philippe Faraut's sculptures. In addition, step-by-step demonstrations including topics such as modeling stylized body types and multi-figure sculptures are shown through the use of over 600 photographs. Further Features include: . The illusion of translucent fabric. . Examples of the anatomy of folds. . Exercises for modeling clothing & leather. . Methods for creating armatures. . Techniques to improve speed. . Hollowing techniques for complex figures.
Author: Nan Smith Publisher: 500 Series ISBN: 9781454707745 Category : Ceramic sculpture Languages : en Pages : 0
Book Description
Presents a selection of contemporary ceramics based on the human form, including the work of Wesley Anderegg, Jeffrey Mongrain, Scott Stockdale, and Yeon Joo Lee.
Author: Andrew McNamara Publisher: CRC Press ISBN: 0429797621 Category : Technology & Engineering Languages : en Pages : 735
Book Description
Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 2 of a 2-volume set.
Author: G.N. Pande Publisher: CRC Press ISBN: 1000100294 Category : Science Languages : en Pages : 691
Book Description
In this volume a number of developments on a variety of topics have been reported. These topics include: partially saturated soil; instabilities in soil behaviour; environmental geomechanics; parallel computing; and applications to tunnels, embankments, slopes, foundations and anchors.
Author: Dario Grana Publisher: John Wiley & Sons ISBN: 1119086183 Category : Science Languages : en Pages : 259
Book Description
Seismic reservoir characterization aims to build 3-dimensional models of rock and fluid properties, including elastic and petrophysical variables, to describe and monitor the state of the subsurface for hydrocarbon exploration and production and for CO₂ sequestration. Rock physics modeling and seismic wave propagation theory provide a set of physical equations to predict the seismic response of subsurface rocks based on their elastic and petrophysical properties. However, the rock and fluid properties are generally unknown and surface geophysical measurements are often the only available data to constrain reservoir models far away from well control. Therefore, reservoir properties are generally estimated from geophysical data as a solution of an inverse problem, by combining rock physics and seismic models with inverse theory and geostatistical methods, in the context of the geological modeling of the subsurface. A probabilistic approach to the inverse problem provides the probability distribution of rock and fluid properties given the measured geophysical data and allows quantifying the uncertainty of the predicted results. The reservoir characterization problem includes both discrete properties, such as facies or rock types, and continuous properties, such as porosity, mineral volumes, fluid saturations, seismic velocities and density. Seismic Reservoir Modeling: Theory, Examples and Algorithms presents the main concepts and methods of seismic reservoir characterization. The book presents an overview of rock physics models that link the petrophysical properties to the elastic properties in porous rocks and a review of the most common geostatistical methods to interpolate and simulate multiple realizations of subsurface properties conditioned on a limited number of direct and indirect measurements based on spatial correlation models. The core of the book focuses on Bayesian inverse methods for the prediction of elastic petrophysical properties from seismic data using analytical and numerical statistical methods. The authors present basic and advanced methodologies of the current state of the art in seismic reservoir characterization and illustrate them through expository examples as well as real data applications to hydrocarbon reservoirs and CO₂ sequestration studies.
Author: Barbara Clarke Publisher: Springer Science & Business Media ISBN: 038709668X Category : Education Languages : en Pages : 311
Book Description
Tasks in Primary Mathematics Teacher Education is intended to advance relevant research and innovative international practices in the preparation and professional development of mathematics teachers. Emerging from discussion at the ICMI study on teacher professional development, this volume, focused on primary and elementary teachers, culls a richness that can only be found by gathering wisdom from varied experiences around the world. The choice of tasks, and the associated pedagogies, is a key aspect of teaching and learning mathematics. Arguing that what students learn is largely defined by the tasks they are given, several major themes are presented. One such major strand, the form, function and focus of tasks, is discussed throughout several chapters, offering analysis, discussion of implementation, and exemplars of a broader category of illustrative techniques for developing critical understanding.
Author: António Cardoso Publisher: CRC Press ISBN: 0429823169 Category : Technology & Engineering Languages : en Pages : 749
Book Description
Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering. This is volume 2 of the NUMGE 2018 set.
Author: Olivier Buzzi Publisher: CRC Press ISBN: 1482266946 Category : Technology & Engineering Languages : en Pages : 963
Book Description
Unsaturated soil mechanics is now increasingly recognized as an integral part of mainstream soil mechanics, and the importance and relevance of unsaturated soil mechanics for the broad field of geotechnical engineering no longer needs to be emphasized. The two volumes making up Unsaturated soils include papers from the 4th Asia Pacific Confere
Author: C.-K. Chung Publisher: IOS Press ISBN: 1607508222 Category : Technology & Engineering Languages : en Pages : 1382
Book Description
This book is the international edition of the proceedings of IS-Seoul 2011, the Fifth International Symposium on Deformation Characteristics of Geomaterials, held in Seoul, South Korea, in September 2011.The book includes 7 invited lectures, as well as 158 technical papers selected from the 182 submitted. The symposium explored ideas about the complex load-deformation response in geomaterials, including laboratory methods for small and large strains; anisotropy and localization; time-dependent responses in soils; characteristics of treated, unsaturated, and natural geomaterials; applications in field methods; evaluation of field performance in geotechnical structures; and physical and numerical modeling in geomechanics. These topics were grouped under a number of main themes, including experimental investigations from very small strains to beyond failure; behavior, characterization and modeling of various geomaterials; and practical prediction and interpretation of ground response: field observation and case histories. Both the symposium and this book represent an important contribution to the exchange of advanced knowledge and ideas in geotechnical engineering and promote partnership among participants worldwide.
Author: Andrew McNamara
Author: Katherine Dewey
Author: Philippe Faraut
Author: Nan Smith
Author: Andrew McNamara
Author: G.N. Pande
Author: Dario Grana
Author: Barbara Clarke
Author: António Cardoso
Author: Olivier Buzzi
Author: C.-K. Chung