Modelling Control Systems Using IEC 61499 PDF Download

Author: Robert Lewis
Publisher: IET
ISBN: 0852967969
Category : Technology & Engineering
Languages : en
Pages : 207

View

Book Description
The IEC 61499 standard was developed to model distributed control systems. This book introduces the main concepts and models defined in the IEC 61499 standard, particularly the use of function blocks, covering service interface function blocks, event function blocks, industrial application examples, and future development. The book is written as a user guide for the application of the standard for modeling distributed systems, and will useful for those working in industrial control, software engineering, and manufacturing systems. Lewis is the UK expert on two IEC working groups. Annotation copyrighted by Book News Inc., Portland, OR.

Author: Alois Zoitl
Publisher:
ISBN: 9781680153439
Category : Electronic books
Languages : en
Pages : 227

View

Book Description
This significantly updated second edition provides a thorough yet concise introduction to the main concepts and models defined in the IEC 61499 standard for modeling distributed control systems for use in factory automation.

Author: Alois Zoitl
Publisher: IET
ISBN: 1849197601
Category : Technology & Engineering
Languages : en
Pages : 246

View

Book Description
This book provides a concise introduction to the main concepts and models defined in the standard for modelling distributed control systems for use in factory automation.

Author: Li Hsien Yoong
Publisher: Springer
ISBN: 3319105213
Category : Technology & Engineering
Languages : en
Pages : 209

View

Book Description
This book describes a novel approach for the design of embedded systems and industrial automation systems, using a unified model-driven approach that is applicable in both domains. The authors illustrate their methodology, using the IEC 61499 standard as the main vehicle for specification, verification, static timing analysis and automated code synthesis. The well-known synchronous approach is used as the main vehicle for defining an unambiguous semantics that ensures determinism and deadlock freedom. The proposed approach also ensures very efficient implementations either on small-scale embedded devices or on industry-scale programmable automation controllers (PACs). It can be used for both centralized and distributed implementations. Significantly, the proposed approach can be used without the need for any run-time support. This approach, for the first time, blurs the gap between embedded systems and automation systems and can be applied in wide-ranging applications in automotive, robotics, and industrial control systems. Several realistic examples are used to demonstrate for readers how the methodology can enable them to reduce the time-to-market, while improving the design quality and productivity.

Author: Valeriy Vyatkin
Publisher:
ISBN: 9781936007936
Category : Automatic control
Languages : en
Pages : 0

View

Book Description
IEC 61499 is the standard for distributed control systems that follows on from the IEC 61131 standard for programmable logic controllers (PLC). This book is a practical guide for component-based development of distributed embedded and control systems as proposed by this international standard.

Author: Robert W. Lewis
Publisher: IET
ISBN: 9780852969502
Category : Technology & Engineering
Languages : en
Pages : 350

View

Book Description
This revised edition includes all IEC proposed amendments and corrections for the planned 1999 revision of IEC 1131-3, as agreed by the IEC working group. It accurately describes the languages and concepts, and interprets the standard for practical implementation and applications.

Author: Cheng Pang
Publisher:
ISBN:
Category : Airports
Languages : en
Pages : 180

View

Book Description
In the domain of automation and control systems, the increasing use of decentralization in system architecture and the exponential growth of control complexity are drastically shifting the traditional monolithic centralized control design paradigm towards the reconfigurable distributed control engineering approaches. This trend is also reflected in the development of the IEC 61499 standard for industrial process measurement and control systems. Although the IEC 61499 standard proposes an open, component-oriented, and platform-independent software development framework for distributed automation and control systems, its industrial recognition and practice are quite limited due to the fact that apart from the design complexity of distributed systems, several core software engineering aspects of the standard are unfamiliar to most industrial practitioners and the new engineering paradigm's practical benefits are unclear to them either. This thesis addresses these problems by proposing a model-driven engineering methodology for the modelling and generation of distributed automation intelligence. It is aimed to provide a high-level development approach of distributed control systems and the corresponding simulation model generation using IEC 61499. The prerequisites to achieve this goal are: a systematic modelling methodology, a flexible model generator, and a generic data exchange mechanism. In this thesis, automation and control systems are hierarchically modelled based on the concept of Intelligent Mechatronic Component (IMC). Each IMC is implemented as a set of IEC 61499 function blocks following the Model-View-Controller design pattern to enable closed-loop model simulation. To precisely synchronize the control logic distributed over the IMC hierarchy, the Time-Complemented Event-Driven control architecture is proposed. A knowledge-based model generator is developed to automate the generation of IMC models based on the design specifications of the automation and control systems. Finally, an XML-based mark-up language, IMCML, is designed to realize data unification among the heterogeneous tools and to support seamless data exchange during the proposed model-driven engineering process. A set of prototype tools has been developed to demonstrate the feasibility and efficiency of the methodologies presented in this thesis. The tool set includes an IMCML editor and an IMC model generator for airport baggage handling systems, which can be easily extended and applied for the more general material handling systems. It has been shown that the ideas presented in this thesis are beneficial for existing development process and viable for practical industrial applications.

Author: Alois Zoitl
Publisher: CRC Press
ISBN: 1482259060
Category : Technology & Engineering
Languages : en
Pages : 512

View

Book Description
Distributed Control Applications: Guidelines, Design Patterns, and Application Examples with the IEC 61499 discusses the IEC 61499 reference architecture for distributed and reconfigurable control and its adoption by industry. The book provides design patterns, application guidelines, and rules for designing distributed control applications based on the IEC 61499 reference model. Moreover, examples from various industrial domains and laboratory environments are introduced and explored.

Author: A.E. Ruano
Publisher: IET
ISBN: 0863414893
Category : Computers
Languages : en
Pages : 478

View

Book Description
Intelligent Control techniques are becoming important tools in both academia and industry. Methodologies developed in the field of soft-computing, such as neural networks, fuzzy systems and evolutionary computation, can lead to accommodation of more complex processes, improved performance and considerable time savings and cost reductions. Intelligent Control Systems using Computational Intellingence Techniques details the application of these tools to the field of control systems. Each chapter gives and overview of current approaches in the topic covered, with a set of the most important references in the field, and then details the author's approach, examining both the theory and practical applications.

Author: Alois Zoitl
Publisher: CRC Press
ISBN: 1351830937
Category : Technology & Engineering
Languages : en
Pages : 521

View

Book Description
Distributed Control Applications: Guidelines, Design Patterns, and Application Examples with the IEC 61499 discusses the IEC 61499 reference architecture for distributed and reconfigurable control and its adoption by industry. The book provides design patterns, application guidelines, and rules for designing distributed control applications based on the IEC 61499 reference model. Moreover, examples from various industrial domains and laboratory environments are introduced and explored.