Author: K. M. MohsinPublisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Modeling of Thermally Aware Carbon Nanotube and Graphene Based Post CMOS VLSI Interconnect
Author: K. M. MohsinCarbon Nanotube and Graphene Nanoribbon Interconnects
Author: Debaprasad DasPublisher: CRC Press
ISBN: 1482239507
Category : Technology & Engineering
Languages : en
Pages : 197
Book Description
An Alternative to Copper-Based Interconnect Technology With an increase in demand for more circuit components on a single chip, there is a growing need for nanoelectronic devices and their interconnects (a physical connecting medium made of thin metal films between several electrical nodes in a semiconducting chip that transmit signals from one point to another without any distortion). Carbon Nanotube and Graphene Nanoribbon Interconnects explores two new important carbon nanomaterials, carbon nanotube (CNT) and graphene nanoribbon (GNR), and compares them with that of copper-based interconnects. These nanomaterials show almost 1,000 times more current-carrying capacity and significantly higher mean free path than copper. Due to their remarkable properties, CNT and GNR could soon replace traditional copper interconnects. Dedicated to proving their benefits, this book covers the basic theory of CNT and GNR, and provides a comprehensive analysis of the CNT- and GNR-based VLSI interconnects at nanometric dimensions. Explore the Potential Applications of CNT and Graphene for VLSI Circuits The book starts off with a brief introduction of carbon nanomaterials, discusses the latest research, and details the modeling and analysis of CNT and GNR interconnects. It also describes the electrical, thermal, and mechanical properties, and structural behavior of these materials. In addition, it chronicles the progression of these fundamental properties, explores possible engineering applications and growth technologies, and considers applications for CNT and GNR apart from their use in VLSI circuits. Comprising eight chapters this text: Covers the basics of carbon nanotube and graphene nanoribbon Discusses the growth and characterization of carbon nanotube and graphene nanoribbon Presents the modeling of CNT and GNR as future VLSI interconnects Examines the applicability of CNT and GNR in terms of several analysis works Addresses the timing and frequency response of the CNT and GNR interconnects Explores the signal integrity analysis for CNT and GNR interconnects Models and analyzes the applicability of CNT and GNR as power interconnects Considers the future scope of CNT and GNR Beneficial to VLSI designers working in this area, Carbon Nanotube and Graphene Nanoribbon Interconnects provides a complete understanding of carbon-based materials and interconnect technology, and equips the reader with sufficient knowledge about the future scope of research and development for this emerging topic.
Carbon Nanotubes for Interconnects
Author: Aida Todri-SanialPublisher: Springer
ISBN: 3319297465
Category : Technology & Engineering
Languages : en
Pages : 340
Book Description
This book provides a single-source reference on the use of carbon nanotubes (CNTs) as interconnect material for horizontal, on-chip and 3D interconnects. The authors demonstrate the uses of bundles of CNTs, as innovative conducting material to fabricate interconnect through-silicon vias (TSVs), in order to improve the performance, reliability and integration of 3D integrated circuits (ICs). This book will be first to provide a coherent overview of exploiting carbon nanotubes for 3D interconnects covering aspects from processing, modeling, simulation, characterization and applications. Coverage also includes a thorough presentation of the application of CNTs as horizontal on-chip interconnects which can potentially revolutionize the nanoelectronics industry. This book is a must-read for anyone interested in the state-of-the-art on exploiting carbon nanotubes for interconnects for both 2D and 3D integrated circuits.
Carbon Nanotube Based VLSI Interconnects
Author: Brajesh Kumar KaushikPublisher: Springer
ISBN: 8132220471
Category : Technology & Engineering
Languages : en
Pages : 94
Book Description
The brief primarily focuses on the performance analysis of CNT based interconnects in current research scenario. Different CNT structures are modeled on the basis of transmission line theory. Performance comparison for different CNT structures illustrates that CNTs are more promising than Cu or other materials used in global VLSI interconnects. The brief is organized into five chapters which mainly discuss: (1) an overview of current research scenario and basics of interconnects; (2) unique crystal structures and the basics of physical properties of CNTs, and the production, purification and applications of CNTs; (3) a brief technical review, the geometry and equivalent RLC parameters for different single and bundled CNT structures; (4) a comparative analysis of crosstalk and delay for different single and bundled CNT structures; and (5) various unique mixed CNT bundle structures and their equivalent electrical models.
Design and Crosstalk Analysis in Carbon Nanotube Interconnects
Author: P. Uma SathyakamPublisher: Springer Nature
ISBN: 9811588880
Category : Technology & Engineering
Languages : en
Pages : 134
Book Description
This book provides a single-source reference on carbon nanotubes for interconnect applications. It presents the recent advances in modelling and challenges of carbon nanotube (CNT)-based VLSI interconnects. Starting with a background of carbon nanotubes and interconnects, this book details various aspects of CNT interconnect models, the design metrics of CNT interconnects, crosstalk analysis of recently proposed CNT interconnect structures, and geometries. Various topics covered include the use of semiconducting CNTs around metallic CNTs, CNT interconnects with air gaps, use of emerging ultra low-k materials and their integration with CNT interconnects, and geometry-based crosstalk reduction techniques. This book will be useful for researchers and design engineers working on carbon nanotubes for interconnects for both 2D and 3D integrated circuits.
Carbon-Based Electronics
Author: Ashok SrivastavaPublisher: CRC Press
ISBN: 9814613118
Category : Science
Languages : en
Pages : 153
Book Description
Discovery of one-dimensional material carbon nanotubes in 1991 by the Japanese physicist Dr. Sumio Iijima has resulted in voluminous research in the field of carbon nanotubes for numerous applications, including possible replacement of silicon used in the fabrication of CMOS chips. One interesting feature of carbon nanotubes is that these can be me
Nano-CMOS and Post-CMOS Electronics
Author: Saraju P. MohantyPublisher: IET
ISBN: 184919999X
Category : Technology & Engineering
Languages : en
Pages : 439
Book Description
Continuing from volume 1, this volume outlines circuit- and system-level design approaches and issues for these devices. Topics covered include self-healing analog/RF circuits; on-chip gate delay variability measurement in scaled technology; FinFET SRAM circuits; nanoscale FinFET devices for PVT aware SRAM; low leakage variability aware CMOS logic circuits; thermal effects in MWCNT VLSI interconnects; an accurate PVT-aware statistical logic library for nano-CMOS integrated circuits; SPICEless RTL design optimization of nano-electronic digital integrated circuits; power-delay trade-off driven optimal scheduling of CDFGs during high level synthesis; green on-chip inductors for three-dimensional integrated circuits; 3D NoC -- a promising alternative for tomorrow's nano-system design; and DNA computing.
Graphene and VLSI Interconnects
Author: Cher-Ming TanPublisher: CRC Press
ISBN: 1000470687
Category : Science
Languages : en
Pages : 121
Book Description
Copper (Cu) has been used as an interconnection material in the semiconductor industry for years owing to its best balance of conductivity and performance. However, it is running out of steam as it is approaching its limits with respect to electrical performance and reliability. Graphene is a non-metal material, but it can help to improve electromigration (EM) performance of Cu because of its excellent properties. Combining graphene with Cu for very large-scale integration (VLSI) interconnects can be a viable solution. The incorporation of graphene into Cu allows the present Cu fabrication back-end process to remain unaltered, except for the small step of “inserting” graphene into Cu. Therefore, it has a great potential to revolutionize the VLSI integrated circuit (VLSI-IC) industry and appeal for further advancement of the semiconductor industry. This book is a compilation of comprehensive studies done on the properties of graphene and its synthesis methods suitable for applications of VLSI interconnects. It introduces the development of a new method to synthesize graphene, wherein it not only discusses the method to grow graphene over Cu but also allows the reader to know how to optimize graphene growth, using statistical design of experiments (DoE), on Cu interconnects in order to obtain good-quality and reliable interconnects. It provides a basic understanding of graphene–Cu interaction mechanism and evaluates the electrical and EM performance of graphenated Cu interconnects.
Nano-CMOS and Post-CMOS Electronics
Author: Saraju P. MohantyPublisher: IET
ISBN: 1849199973
Category : Technology & Engineering
Languages : en
Pages : 383
Book Description
Over two volumes this work describes the modelling, design, and implementation of nano-scaled CMOS electronics, and the new generation of post-CMOS devices, at both the device and circuit levels.
VLSI and Post-CMOS Electronics
Author: Rohit DhimanPublisher: Institution of Engineering and Technology
ISBN: 1839530537
Category : Technology & Engineering
Languages : en
Pages : 409
Book Description
VLSI, or Very-Large-Scale-Integration, is the practice of combining billions of transistors to create an integrated circuit. At present, VLSI circuits are realised using CMOS technology. However, the demand for ever smaller, more efficient circuits is now pushing the limits of CMOS. Post-CMOS refers to the possible future digital logic technologies beyond the CMOS scaling limits. This 2-volume set addresses the current state of the art in VLSI technologies and presents potential options for post-CMOS processes. VLSI and Post-CMOS Electronics is a useful reference guide for researchers, engineers and advanced students working in the area of design and modelling of VLSI and post-CMOS devices and their circuits. Volume 1 focuses on design, modelling and simulation, including applications in low voltage and low power VLSI, and post-CMOS devices and circuits. Volume 2 addresses a wide range of devices, circuits and interconnects.