Micro Cogeneration PDF Download

Author: Martin Pehnt
Publisher: Springer Science & Business Media
ISBN: 3540308210
Category : Technology & Engineering
Languages : en
Pages : 356

View

Book Description
The introduction of micro CHP – the simultaneous production of heat and power in a single building based on small energy conversion units such as Stirling and reciprocating engines or fuel cells – is of increasing political and public interest. This book introduces into micro CHP systems and technologies, and presents the results of the first such investigation carried out by four German research bodies.

Author: R Beith
Publisher: Elsevier
ISBN: 0857092758
Category : Technology & Engineering
Languages : en
Pages : 553

View

Book Description
Small and micro combined heat and power (CHP) systems are a form of cogeneration technology suitable for domestic and community buildings, commercial establishments and industrial facilities, as well as local heat networks. One of the benefits of using cogeneration plant is a vastly improved energy efficiency: in some cases achieving up to 80–90% systems efficiency, whereas small-scale electricity production is typically at well below 40% efficiency, using the same amount of fuel. This higher efficiency affords users greater energy security and increased long-term sustainability of energy resources, while lower overall emissions levels also contribute to an improved environmental performance.Small and micro combined heat and power (CHP) systems provides a systematic and comprehensive review of the technological and practical developments of small and micro CHP systems.Part one opens with reviews of small and micro CHP systems and their techno-economic and performance assessment, as well as their integration into distributed energy systems and their increasing utilisation of biomass fuels. Part two focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines, gas turbines and microturbines, Stirling engines, organic Rankine cycle process and fuel cell systems. Heat-activated cooling (i.e. trigeneration) technologies and energy storage systems, of importance to the regional/seasonal viability of this technology round out this section. Finally, part three covers the range of applications of small and micro CHP systems, from residential buildings and district heating, to commercial buildings and industrial applications, as well as reviewing the market deployment of this important technology.With its distinguished editor and international team of expert contributors, Small and micro combined heat and power (CHP) systems is an essential reference work for anyone involved or interested in the design, development, installation and optimisation of small and micro CHP systems. - Reviews small- and micro-CHP systems and their techno-economic and performance assessment - Explores integration into distributed energy systems and their increasing utilisation of biomass fuels - Focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines

Author: Martin Pehnt
Publisher: Springer
ISBN: 9783642064982
Category : Technology & Engineering
Languages : en
Pages : 0

View

Book Description
The introduction of micro CHP – the simultaneous production of heat and power in a single building based on small energy conversion units such as Stirling and reciprocating engines or fuel cells – is of increasing political and public interest. This book introduces into micro CHP systems and technologies, and presents the results of the first such investigation carried out by four German research bodies.

Author: Bernard F. Kolanowski
Publisher: The Fairmont Press, Inc.
ISBN: 0881734225
Category : Technology & Engineering
Languages : en
Pages : 219

View

Book Description
This comprehensive reference provides a wealth of information to assist you in evaluating the feasibility and potential benefits of cogeneration for your facility. It has been revised to include an additional chapter and regulatory developments.

Author: Jan Kiciński
Publisher: Springer
ISBN: 3319120182
Category : Technology & Engineering
Languages : en
Pages : 227

View

Book Description
This book presents the most recent trends and concepts in power engineering, especially with regard to prosumer and civic energy generation. In so doing, it draws widely on his experience gained during the development of steam microturbines for use in small combined heat and power stations based on the organic Rankine cycle (CHP-ORC). Major issues concerning the dynamic properties of mechanical systems, in particular rotating systems, are discussed, and the results obtained when using unconventional bearing systems, presented. Modeling and analysis of radial-flow and axial-flow microturbines are addressed in detail, covering rotor analysis with different bearing systems, simulation modal analysis, and stress analysis. Furthermore, experimental studies of the dynamic properties of microturbine elements are extensively described. Interest in distributed generation and CHP-ORC is growing rapidly, and the potential market for such systems promises to be very large. This book will be of value for engineers and scientists involved in the design, modeling, operation, and diagnostics of various types of turbomachinery, especially steam microturbines.

Author: Nicolae Badea
Publisher: Springer
ISBN: 1447162544
Category : Technology & Engineering
Languages : en
Pages : 396

View

Book Description
This book provides a manual for the technical and structural design of systems for supplying decentralised energy in residential buildings. It presents the micro-combined cooling, heating & power systems Stirling engines & renewable energy sources (mCCHP-SE-RES) systems in an accessible manner both for the public at large, and for professionals who conceive, design or commercialise such systems or their components. The high performance levels of these systems are demonstrated within the final chapter by the results of an experiment in which a house is equipped with a mCCHP-SE-RES system. The reader is also familiarized with the conceptual, technical and legal aspects of modern domestic energy systems; the components that constitute these systems; and advanced algorithms for achieving the structural and technical design of such systems. In residential buildings, satisfying demands of durable development has gradually evolved from necessity to obligation and institutionalisation. Consequently a major paradigm change has appeared in the supply of energy to residential buildings, from the centralised production of energy using fossil fuels to the decentralised production of energy using local renewable sources. Furthermore, on the energy system market, energy micro systems which use renewable energy sources are increasingly commercialised. From among these, the mCCHP-SE-RES systems are particularly striking because they offer a high performance and they enhance the relationship between humans and the environment. This book is intended for postgraduate students of electrical engineering, applied mathematicians, and researchers of modelling and control of complex systems or power system technologies.

Author: David Flin
Publisher: IET
ISBN: 0863417388
Category : Technology & Engineering
Languages : en
Pages : 129

View

Book Description
If there are two phrases we have come to know very well, they are 'environmental awareness' and 'credit crunch'. The world is looking for ways to decrease the emission of CO2 into the atmosphere, without incurring major costs in doing so. By increasing efficiencies up to about 90 per cent using well-established and mature technologies, cogeneration represents the best option for short-term reductions in CO2 emission levels.

Author: Barbara Praetorius
Publisher: Springer Science & Business Media
ISBN: 3790820768
Category : Business & Economics
Languages : en
Pages : 249

View

Book Description
Innovation is key to achieving a sustainable electricity system. New technologies and organizational changes can bring about more sustainable, climate-friendly electricity structures. Yet the dynamics of innovation are complex, and difficult to shape. This book, written by experts in the field, sets out to explore the dynamics, the drivers and the setting of innovation processes. Case studies on micro cogeneration, carbon capture and storage, consumer feedback, network regulation and emissions trading provide insights into innovation dynamics in the electricity system and are analyzed to derive strategic implications for innovation policies. A special focus is placed on drivers and barriers of change, and their consequences for shaping the innovation process. This book is an indispensable source of information for researchers and decision makers in energy and climate change as well as for lecturers and students interested in the principles and ramifications of electricity innovation dynamics.

Author: Jan L.M. Hensen
Publisher: Routledge
ISBN: 0429688539
Category : Architecture
Languages : en
Pages : 922

View

Book Description
When used appropriately, building performance simulation has the potential to reduce the environmental impact of the built environment, to improve indoor quality and productivity, as well as to facilitate future innovation and technological progress in construction. Since publication of the first edition of Building Performance Simulation for Design and Operation, the discussion has shifted from a focus on software features to a new agenda, which centres on the effectiveness of building performance simulation in building life cycle processes. This new edition provides a unique and comprehensive overview of building performance simulation for the complete building life cycle from conception to demolition, and from a single building to district level. It contains new chapters on building information modelling, occupant behaviour modelling, urban physics modelling, urban building energy modelling and renewable energy systems modelling. This new edition keeps the same chapter structure throughout including learning objectives, chapter summaries and assignments. Moreover, the book: • Provides unique insights into the techniques of building performance modelling and simulation and their application to performance-based design and operation of buildings and the systems which service them. • Provides readers with the essential concepts of computational support of performance-based design and operation. • Provides examples of how to use building simulation techniques for practical design, management and operation, their limitations and future direction. It is primarily intended for building and systems designers and operators, and postgraduate architectural, environmental or mechanical engineering students.

Author: XinRong Zhang
Publisher: Springer
ISBN: 331926950X
Category : Business & Economics
Languages : en
Pages : 852

View

Book Description
This book gathers an in-depth collection of 45 selected papers presented at the Global Conference on Global Warming 2014 in Beijing, China, covering a broad variety of topics from the main principles of thermodynamics and their role in design, analysis, and the improvements in performance of energy systems to the potential impact of global warming on human health and wellbeing. Given energy production’s role in contributing to global warming and climate change, this work provides solutions to global warming from the point of view of energy. Incorporating multi-disciplinary expertise and approaches, it provides a platform for the analysis of new developments in the area of global warming and climate change, as well as potential energy solutions including renewable energy, energy efficiency, energy storage, hydrogen production, CO2 capture and environmental impact assessment. The research and analysis presented herein will benefit international scientists, researchers, engineers, policymakers and all others with an interest in global warming and its potential solutions.