Author: Valentin L. Popov Publisher: Springer ISBN: 3662587092 Category : Science Languages : en Pages : 357
Book Description
This open access book contains a structured collection of the complete solutions of all essential axisymmetric contact problems. Based on a systematic distinction regarding the type of contact, the regime of friction and the contact geometry, a multitude of technically relevant contact problems from mechanical engineering, the automotive industry and medical engineering are discussed. In addition to contact problems between isotropic elastic and viscoelastic media, contact problems between transversal-isotropic elastic materials and functionally graded materials are addressed, too. The optimization of the latter is a focus of current research especially in the fields of actuator technology and biomechanics. The book takes into account adhesive effects which allow access to contact-mechanical questions about micro- and nano-electromechanical systems. Solutions of the contact problems include both the relationships between the macroscopic force, displacement and contact length, as well as the stress and displacement fields at the surface and, if appropriate, within the half-space medium. Solutions are always obtained with the simplest available method - usually with the method of dimensionality reduction (MDR) or approaches which use the solution of the non-adhesive normal contact problem to solve the respective contact problem.
Author: Roger Borcherdt Publisher: Cambridge University Press ISBN: 1108495699 Category : Science Languages : en Pages : 519
Book Description
A rigorous self-contained exposition of the mathematical theory for wave propagation and general ray theory in layered viscoelastic media.
Author: G.A.C. Graham Publisher: Springer ISBN: 3709126940 Category : Technology & Engineering Languages : en Pages : 317
Book Description
The main emphasis of these Lecture Notes is on constructing solutions to specific viscoelastic boundary value problems; however properties of the equations of viscoelasticity that provide the theoretical underpinnings for constructing such solutions are also covered. Particular attention is paid to the solution of crack and contact problems. This work is of interest in the context of polymer fracture, modelling of material behaviour, rebound testing of polymers and the phenomenon of hysteretic friction.
Author: Michael Zhuravkov Publisher: Springer Nature ISBN: 9811984107 Category : Science Languages : en Pages : 317
Book Description
This textbook contains sections with fundamental, classical knowledge in solid mechanics, as well as original modern mathematical models to describe the state and behavior of solid deformable bodies. It has original sections with the basics of mathematical modeling in the solid mechanics, material on the basic principles, and features of mathematical formulation of model problems of solid mechanics. For successful mastering of the material, it is necessary to have basic knowledge of the relevant sections of the courses of mathematical analysis, linear algebra and tensor analysis, differential equations, and equations of mathematical physics. Each section contains a list of test questions and exercises to check the level of assimilation of the material. The textbook is intended for senior university students, postgraduates, and research fellows. It can be used in the study of general and special disciplines in various sections of solid mechanics, applied mechanics for students and undergraduates of various specializations and specialties, such as mechanics and mathematical modeling, applied mathematics, solid physics, and engineering mechanics.
Author: Daniel D. Joseph Publisher: Springer Science & Business Media ISBN: 1461244625 Category : Science Languages : en Pages : 772
Book Description
This book is about two special topics in rheological fluid mechanics: the elasticity of liquids and asymptotic theories of constitutive models. The major emphasis of the book is on the mathematical and physical consequences of the elasticity of liquids; seventeen of twenty chapters are devoted to this. Constitutive models which are instantaneously elastic can lead to some hyperbolicity in the dynamics of flow, waves of vorticity into rest (known as shear waves), to shock waves of vorticity or velocity, to steady flows of transonic type or to short wave instabilities which lead to ill-posed problems. Other kinds of models, with small Newtonian viscosities, give rise to perturbed instantaneous elasticity, associated with smoothing of discontinuities as in gas dynamics. There is no doubt that liquids will respond like elastic solids to impulses which are very rapid compared to the time it takes for the molecular order associated with short range forces in the liquid, to relax. After this, all liquids look viscous with signals propagating by diffusion rather than by waves. For small molecules this time of relaxation is estimated as lQ-13 to 10-10 seconds depending on the fluids. Waves associated with such liquids move with speeds of 1 QS cm/s, or even faster. For engineering applications the instantaneous elasticity of these fluids is of little interest; the practical dynamics is governed by diffusion, ·say, by the Navier-Stokes equations. On the other hand, there are other liquids which are known to have much longer times of relaxation.
Author: J.P. Boehler Publisher: Springer Science & Business Media ISBN: 9400968272 Category : Technology & Engineering Languages : en Pages : 926
Book Description
In 1978, the European Mechanics Committee and the French Centre National de la Recherche Scientifique agreed to the organization of an Interna tional Colloquium on the "Mechanical Behavior of Anisotropic Solids". The meeting was held at Villard-de-Lans (near Grenoble, France) from 19th to 22 nd June 1979. The Colloquium considered mechanical aspects of the anisotropy of solids, both initial and induced by permanent deformation, anisotropic hardening and damage, oriented fissuration, etc. Topics concerned mathematical, experimental and engineering aspects of the anisotropy of metals, composites, soils and rocks. The aim of the Colloquium was to bring together experimentalists, theoretecians and engineers interested in various features of mechanical anisotropy, in order to permit an interdisciplinary exchange of understanding, experience and methods. A detailed description of the scope, aim and proposed topics is contained in the Preface. The announcement of the Colloquium attracted a large number of sub mitted contributions. Conforming with the principles of Euromech Colloquia and of the Colloques Internationaux du CNRS, the accepted contributions were limited to 50 communications. A general description of the scientific program is to be found in the Preface. Five general lectures gave state-of-the-art reports concerning some areas of the behavior of anisotropic solids; the 50 communications were divided into 12 sessions dealing with specific topics (see "Contents"). In order to facilitate subsequent contact between the reader and the contributors, full addresses are given in the "List of Authors."
Author: Bilen Emek Abali Publisher: Springer Nature ISBN: 3030504603 Category : Science Languages : en Pages : 491
Book Description
This book features selected manuscripts presented at ICoNSoM 2019, exploring cutting-edge methods for developing novel models in nonlinear solid mechanics. Innovative methods like additive manufacturing—for example, 3D printing— and miniaturization mean that engineers need more accurate techniques for modeling solid body mechanics. The book focuses on the formulation of continuum and discrete models for complex materials and systems, particularly the design of metamaterials.
Author: Valentin L. Popov
Author: Roger Borcherdt
Author: G.A.C. Graham
Author: Michael Zhuravkov
Author: Daniel D. Joseph
Author: 
Author: J.P. Boehler
Author: Bilen Emek Abali
Author: 
Author: