Author: H. Wieringa
Publisher: Springer Science & Business Media
ISBN: 9400944144
Category : Science
Languages : en
Pages : 329
Book Description
Nowadays electrical force transducers, in which various electrical conversion principles are applied, are widely used. Transducers for forces from 1N till 10 MN are commercially available and used for industrial as well as research purposes. They not only serve to measure forces but also for weighing purposes. Directly converting a force into an electrical signal is not possible. This must be done step by step. For instance, in a strain gauge based transducer the conversion chain is: force - stress - strain - resistance change - bridge output. At every conversion point in this chain parasatic influences can interfere with the results and may cause a loss in accuracy. To surmount the problems related to obtaining sufficient accuracy and reliability for these transducers, much research has been done allover the world in the past 35 years. As a result, new materials, new techniques, improved constructional designs and compensation circuits have been found to overcome the parasitic influences. The object of the IMEKO Conferences on behalf of the Technical Committee on Measurement of Force and Mass (TC-3) is to exchange experiences, to discuss problems and to obtain knowledge about practical applications. In this book the papers have been collected that will be discussed at the 11th International Conference on Measurement of Force and Mass. The topic of this conference is "Mechanical Problems in Measuring Force and Mass".
Mechanical Problems in Measuring Force and Mass
Author: H. Wieringa
Publisher: Springer Science & Business Media
ISBN: 9400944144
Category : Science
Languages : en
Pages : 329
Book Description
Nowadays electrical force transducers, in which various electrical conversion principles are applied, are widely used. Transducers for forces from 1N till 10 MN are commercially available and used for industrial as well as research purposes. They not only serve to measure forces but also for weighing purposes. Directly converting a force into an electrical signal is not possible. This must be done step by step. For instance, in a strain gauge based transducer the conversion chain is: force - stress - strain - resistance change - bridge output. At every conversion point in this chain parasatic influences can interfere with the results and may cause a loss in accuracy. To surmount the problems related to obtaining sufficient accuracy and reliability for these transducers, much research has been done allover the world in the past 35 years. As a result, new materials, new techniques, improved constructional designs and compensation circuits have been found to overcome the parasitic influences. The object of the IMEKO Conferences on behalf of the Technical Committee on Measurement of Force and Mass (TC-3) is to exchange experiences, to discuss problems and to obtain knowledge about practical applications. In this book the papers have been collected that will be discussed at the 11th International Conference on Measurement of Force and Mass. The topic of this conference is "Mechanical Problems in Measuring Force and Mass".
Publisher: Springer Science & Business Media
ISBN: 9400944144
Category : Science
Languages : en
Pages : 329
Book Description
Nowadays electrical force transducers, in which various electrical conversion principles are applied, are widely used. Transducers for forces from 1N till 10 MN are commercially available and used for industrial as well as research purposes. They not only serve to measure forces but also for weighing purposes. Directly converting a force into an electrical signal is not possible. This must be done step by step. For instance, in a strain gauge based transducer the conversion chain is: force - stress - strain - resistance change - bridge output. At every conversion point in this chain parasatic influences can interfere with the results and may cause a loss in accuracy. To surmount the problems related to obtaining sufficient accuracy and reliability for these transducers, much research has been done allover the world in the past 35 years. As a result, new materials, new techniques, improved constructional designs and compensation circuits have been found to overcome the parasitic influences. The object of the IMEKO Conferences on behalf of the Technical Committee on Measurement of Force and Mass (TC-3) is to exchange experiences, to discuss problems and to obtain knowledge about practical applications. In this book the papers have been collected that will be discussed at the 11th International Conference on Measurement of Force and Mass. The topic of this conference is "Mechanical Problems in Measuring Force and Mass".
Mechanical Problems in Measuring Force and Mass
Publications of the National Institute of Standards and Technology ... Catalog
Author: National Institute of Standards and Technology (U.S.)
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 464
Book Description
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 464
Book Description
The Mechanics of Engineering: Kinematics, statics, kinetics, statics of rigid bodies and of elastic solids
Author: Augustus Jay Du Bois
Publisher:
ISBN:
Category : Engineering
Languages : en
Pages : 690
Book Description
Publisher:
ISBN:
Category : Engineering
Languages : en
Pages : 690
Book Description
Applied Mechanics Reviews
Lessons in Practical Electricity, Principles, Experiments, and Arithmetical Problems
Author: Coates Walton Swoope
Publisher:
ISBN:
Category : Electric power
Languages : en
Pages : 548
Book Description
Publisher:
ISBN:
Category : Electric power
Languages : en
Pages : 548
Book Description
Applied Mechanics
Author: Charles Edward Fuller
Publisher:
ISBN:
Category : Mechanics, Applied
Languages : en
Pages : 422
Book Description
Publisher:
ISBN:
Category : Mechanics, Applied
Languages : en
Pages : 422
Book Description
Basic Mechanical Engineering
Author: Kaushik Kumar
Publisher: I K International Pvt Ltd
ISBN: 9385909681
Category : Technology & Engineering
Languages : en
Pages : 274
Book Description
The book starts with the law of forces, free-body diagrams, basic information on materials strength including stresses and strains. It further discusses principles of transmission of power and elementary designs of gears, spring, etc. This part concludes with mechanical vibrations, — their importance, types, isolation and critical speed. The second part, Thermal Engineering, deals with basics and laws of thermodynamics; pure substances and their properties. It further includes laws of heat transfer, insulation, and heat exchanges. This part concludes with a detailed discussion on refrigeration and air conditioning. Part three, Fluid Mechanics and Hydraulics, includes properties of fluids, measurement of pressure, Bernoull's equation, hydraulic turbine, pumps and various other hydraulic devices. Part four, Manufacturing Technology, mainly deals with various manufacturing processes such as metal forming, casting, cutting, joining, welding, surface finishing and powder metallurgy. It further deals with conventional and non-conventional machining techniques, fluid power control and automation including hydraulic and pneumatic systems and automation of mechanical systems. Part five, Automobile Engineering deals with various aspects of IC and SI engines and their classification, etc. Four- and two-stroke engines also find place in this section. Next, systems in automobiles including suspension and power transmission systems, starting, ignition, charging and fuel injection systems. The last section deals with power plant engineering and energy. It includes power plant layout, surface condensers, steam generators, boilers and gas turbine plants. It concludes with renewable, non- renewable, conventional and non-conventional sources of energy, and energy conversion devices.
Publisher: I K International Pvt Ltd
ISBN: 9385909681
Category : Technology & Engineering
Languages : en
Pages : 274
Book Description
The book starts with the law of forces, free-body diagrams, basic information on materials strength including stresses and strains. It further discusses principles of transmission of power and elementary designs of gears, spring, etc. This part concludes with mechanical vibrations, — their importance, types, isolation and critical speed. The second part, Thermal Engineering, deals with basics and laws of thermodynamics; pure substances and their properties. It further includes laws of heat transfer, insulation, and heat exchanges. This part concludes with a detailed discussion on refrigeration and air conditioning. Part three, Fluid Mechanics and Hydraulics, includes properties of fluids, measurement of pressure, Bernoull's equation, hydraulic turbine, pumps and various other hydraulic devices. Part four, Manufacturing Technology, mainly deals with various manufacturing processes such as metal forming, casting, cutting, joining, welding, surface finishing and powder metallurgy. It further deals with conventional and non-conventional machining techniques, fluid power control and automation including hydraulic and pneumatic systems and automation of mechanical systems. Part five, Automobile Engineering deals with various aspects of IC and SI engines and their classification, etc. Four- and two-stroke engines also find place in this section. Next, systems in automobiles including suspension and power transmission systems, starting, ignition, charging and fuel injection systems. The last section deals with power plant engineering and energy. It includes power plant layout, surface condensers, steam generators, boilers and gas turbine plants. It concludes with renewable, non- renewable, conventional and non-conventional sources of energy, and energy conversion devices.
Engineering Units of Measurement
Author: John Ramsay
Publisher:
ISBN:
Category : Engineering
Languages : en
Pages : 40
Book Description
Publisher:
ISBN:
Category : Engineering
Languages : en
Pages : 40
Book Description
Appletons' Cyclopædia of Applied Mechanics
Author: Park Benjamin
Publisher:
ISBN:
Category : Industrial arts
Languages : en
Pages : 1000
Book Description
Publisher:
ISBN:
Category : Industrial arts
Languages : en
Pages : 1000
Book Description