Author: Hugh W. Reynolds
Publisher:
ISBN:
Category : Black cherry
Languages : en
Pages : 16
Book Description
S2Low-grade, small-diameter black cherry (Prunus serotina) timber was used to make System 6 cants. Cherry from the Allegheny National Forest (Ludlow, PA), west-central Pennsylvania (Glen Hope, PA), north-central Pennsylvania (Dushore, PA), western Maryland (Oakland, MD), and the Monongahela National Forest (Middle Mountain, WV) was used. The cants were resawed to 414 boards, the boards dried, and blanks were made at the Princeton Laboratory's System 6 pilot plant. By varying the rough mill procedures, differences in board quality and cutting bill requirements were accommodated keeping yields high. The cherry from the Pennsylvania and Maryland sites gave similar yields, while the West Virginia cherry gave 5 percent higher yields. Gum streak was not a problem. Pennsylvania and Maryland cherry gave a 39.0 percent return, and West Virginia cherry gave a 50.3 percent return on a $2.2 million 10-year investment.S3.
Making Black Cherry Blanks from System 6
Author: Hugh W. Reynolds
Publisher:
ISBN:
Category : Black cherry
Languages : en
Pages : 16
Book Description
S2Low-grade, small-diameter black cherry (Prunus serotina) timber was used to make System 6 cants. Cherry from the Allegheny National Forest (Ludlow, PA), west-central Pennsylvania (Glen Hope, PA), north-central Pennsylvania (Dushore, PA), western Maryland (Oakland, MD), and the Monongahela National Forest (Middle Mountain, WV) was used. The cants were resawed to 414 boards, the boards dried, and blanks were made at the Princeton Laboratory's System 6 pilot plant. By varying the rough mill procedures, differences in board quality and cutting bill requirements were accommodated keeping yields high. The cherry from the Pennsylvania and Maryland sites gave similar yields, while the West Virginia cherry gave 5 percent higher yields. Gum streak was not a problem. Pennsylvania and Maryland cherry gave a 39.0 percent return, and West Virginia cherry gave a 50.3 percent return on a $2.2 million 10-year investment.S3.
Publisher:
ISBN:
Category : Black cherry
Languages : en
Pages : 16
Book Description
S2Low-grade, small-diameter black cherry (Prunus serotina) timber was used to make System 6 cants. Cherry from the Allegheny National Forest (Ludlow, PA), west-central Pennsylvania (Glen Hope, PA), north-central Pennsylvania (Dushore, PA), western Maryland (Oakland, MD), and the Monongahela National Forest (Middle Mountain, WV) was used. The cants were resawed to 414 boards, the boards dried, and blanks were made at the Princeton Laboratory's System 6 pilot plant. By varying the rough mill procedures, differences in board quality and cutting bill requirements were accommodated keeping yields high. The cherry from the Pennsylvania and Maryland sites gave similar yields, while the West Virginia cherry gave 5 percent higher yields. Gum streak was not a problem. Pennsylvania and Maryland cherry gave a 39.0 percent return, and West Virginia cherry gave a 50.3 percent return on a $2.2 million 10-year investment.S3.
System 6
Author: Bruce G. Hansen
Publisher:
ISBN:
Category : Furniture industry and trade
Languages : en
Pages : 20
Book Description
Publisher:
ISBN:
Category : Furniture industry and trade
Languages : en
Pages : 20
Book Description
System 6 Alternatives
Author: Bruce G. Hansen
Publisher:
ISBN:
Category : Hardwoods
Languages : en
Pages : 622
Book Description
S2Three system 6 mill-size alternatives were designed and evaluated to determine their overall economic potential for producing standard-size hardwood blanks. The study focused on developing standard discounted cash flow measures. Internal rates of return ranged from about 15 to 35 percent after taxes. Secondary effort was directed at providing accounting cost summaries to facilitate cost comparison of standard-size blanks with rough-dimension stock. Cost per square foot of blanks ranged from about $0.88 to $1.19, depending on mill size and the amount of new investment required.S3.
Publisher:
ISBN:
Category : Hardwoods
Languages : en
Pages : 622
Book Description
S2Three system 6 mill-size alternatives were designed and evaluated to determine their overall economic potential for producing standard-size hardwood blanks. The study focused on developing standard discounted cash flow measures. Internal rates of return ranged from about 15 to 35 percent after taxes. Secondary effort was directed at providing accounting cost summaries to facilitate cost comparison of standard-size blanks with rough-dimension stock. Cost per square foot of blanks ranged from about $0.88 to $1.19, depending on mill size and the amount of new investment required.S3.
Research Paper NE.
Author:
Publisher:
ISBN:
Category : Forests and forestry
Languages : en
Pages : 268
Book Description
Publisher:
ISBN:
Category : Forests and forestry
Languages : en
Pages : 268
Book Description
General Technical Report WO.
Author:
Publisher:
ISBN:
Category : Forests and forestry
Languages : en
Pages : 432
Book Description
Publisher:
ISBN:
Category : Forests and forestry
Languages : en
Pages : 432
Book Description
Monthly Catalog of United States Government Publications
Monthly Catalogue, United States Public Documents
Author:
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 952
Book Description
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 952
Book Description
Government Reports Annual Index
Author:
Publisher:
ISBN:
Category : Government reports announcements & index
Languages : en
Pages : 968
Book Description
Publisher:
ISBN:
Category : Government reports announcements & index
Languages : en
Pages : 968
Book Description
Publications of the Northeastern Forest Experiment Station, 1985 and 1986
Author: Northeastern Forest Experiment Station (Radnor, Pa.)
Publisher:
ISBN:
Category : Forests and forestry
Languages : en
Pages : 92
Book Description
Publisher:
ISBN:
Category : Forests and forestry
Languages : en
Pages : 92
Book Description