Magnetic Flux Compression Experiments Using Plasma Armatures PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Magnetic Flux Compression Experiments Using Plasma Armatures PDF full book. Access full book title Magnetic Flux Compression Experiments Using Plasma Armatures by National Aeronautics and Space Administration (NASA). Download full books in PDF and EPUB format.
Author: National Aeronautics and Space Administration (NASA) Publisher: Createspace Independent Publishing Platform ISBN: 9781720618492 Category : Languages : en Pages : 38
Book Description
Magnetic flux compression reaction chambers offer considerable promise for controlling the plasma flow associated with various micronuclear/chemical pulse propulsion and power schemes, primarily because they avoid thermalization with wall structures and permit multicycle operation modes. The major physical effects of concern are the diffusion of magnetic flux into the rapidly expanding plasma cloud and the development of Rayleigh-Taylor instabilities at the plasma surface, both of which can severely degrade reactor efficiency and lead to plasma-wall impact. A physical parameter of critical importance to these underlying magnetohydrodynamic (MHD) processes is the magnetic Reynolds number (R(sub m), the value of which depends upon the product of plasma electrical conductivity and velocity. Efficient flux compression requires R(sub m) less than 1, and a thorough understanding of MHD phenomena at high magnetic Reynolds numbers is essential to the reliable design and operation of practical reactors. As a means of improving this understanding, a simplified laboratory experiment has been constructed in which the plasma jet ejected from an ablative pulse plasma gun is used to investigate plasma armature interaction with magnetic fields. As a prelude to intensive study, exploratory experiments were carried out to quantify the magnetic Reynolds number characteristics of the plasma jet source. Jet velocity was deduced from time-of-flight measurements using optical probes, and electrical conductivity was measured using an inductive probing technique. Using air at 27-inHg vacuum, measured velocities approached 4.5 km/s and measured conductivities were in the range of 30 to 40 kS/m.Turner, M. W. and Hawk, C. W. and Litchford, R. J.Marshall Space Flight CenterELECTRICAL RESISTIVITY; PLASMA COMPRESSION; MAGNETIC FLUX; REYNOLDS NUMBER; PLASMA JETS; PLASMA DYNAMICS; STABILITY; CHEMICAL PROPULSION; SPACECRAFT PROPULSION; ARMATURES; TEST FACILITIES; PLASMA GUNS
Author: National Aeronautics and Space Administration (NASA) Publisher: Createspace Independent Publishing Platform ISBN: 9781720618492 Category : Languages : en Pages : 38
Book Description
Magnetic flux compression reaction chambers offer considerable promise for controlling the plasma flow associated with various micronuclear/chemical pulse propulsion and power schemes, primarily because they avoid thermalization with wall structures and permit multicycle operation modes. The major physical effects of concern are the diffusion of magnetic flux into the rapidly expanding plasma cloud and the development of Rayleigh-Taylor instabilities at the plasma surface, both of which can severely degrade reactor efficiency and lead to plasma-wall impact. A physical parameter of critical importance to these underlying magnetohydrodynamic (MHD) processes is the magnetic Reynolds number (R(sub m), the value of which depends upon the product of plasma electrical conductivity and velocity. Efficient flux compression requires R(sub m) less than 1, and a thorough understanding of MHD phenomena at high magnetic Reynolds numbers is essential to the reliable design and operation of practical reactors. As a means of improving this understanding, a simplified laboratory experiment has been constructed in which the plasma jet ejected from an ablative pulse plasma gun is used to investigate plasma armature interaction with magnetic fields. As a prelude to intensive study, exploratory experiments were carried out to quantify the magnetic Reynolds number characteristics of the plasma jet source. Jet velocity was deduced from time-of-flight measurements using optical probes, and electrical conductivity was measured using an inductive probing technique. Using air at 27-inHg vacuum, measured velocities approached 4.5 km/s and measured conductivities were in the range of 30 to 40 kS/m.Turner, M. W. and Hawk, C. W. and Litchford, R. J.Marshall Space Flight CenterELECTRICAL RESISTIVITY; PLASMA COMPRESSION; MAGNETIC FLUX; REYNOLDS NUMBER; PLASMA JETS; PLASMA DYNAMICS; STABILITY; CHEMICAL PROPULSION; SPACECRAFT PROPULSION; ARMATURES; TEST FACILITIES; PLASMA GUNS
Author: Andreas A. Neuber Publisher: Springer Science & Business Media ISBN: 354028673X Category : Technology & Engineering Languages : en Pages : 282
Book Description
While the basic operating principles of Helical Magnetic Flux Compression Generators are easy to understand, the details of their construction and performance limits have been described only in government reports, many of them classified. Conferences in the field of flux compression are also dominated by contributions from government (US and foreign) laboratories. And the government-sponsored research has usually been concerned with very large generators with explosive charges that require elaborate facilities and safety arrangements. This book emphasizes research into small generators (less than 500 grams of high explosives) and explains in detail the physical fundamentals, construction details, and parameter-variation effects related to them.
Author: Dimitry Mikitchuk Publisher: Springer ISBN: 3030208559 Category : Science Languages : en Pages : 91
Book Description
The present research studies the fundamental physics occurring during the magnetic flux and magnetized plasma compression by plasma implosion. This subject is relevant to numerous studies in laboratory and space plasmas. Recently, it has attracted particular interest due to the advances in producing high-energy-density plasmas in fusion-oriented experiments, based on the approach of magnetized plasma compression. The studied configuration consists of a cylindrical gas-puff shell with pre-embedded axial magnetic field that pre-fills the anode-cathode gap. Subsequently, axial pulsed current is driven through the plasma generating an azimuthal magnetic field that compresses the plasma and the axial magnetic field embedded in it. A key parameter for the understanding of the physics occurring during the magnetized plasma compression is the evolution and distribution of the axial and azimuthal magnetic fields. Here, for the first time ever, both fields are measured simultaneously employing non-invasive spectroscopic methods that are based on the polarization properties of the Zeeman effect. These measurements reveal unexpected results of the current distribution and the nature of the equilibrium between the axial and azimuthal fields. These observations show that a large part of the current does not flow in the imploding plasma, rather it flows through a low-density plasma residing at large radii. The development of a force-free current configuration is suggested to explain this phenomenon. Previously unpredicted observations in higher-power imploding-magnetized-plasma experiments, including recent unexplained structures observed in the Magnetized Liner Inertial Fusion experiment, may be connected to the present discovery.
Author: Larry L. Altgilbers Publisher: Springer Science & Business Media ISBN: 9780387987866 Category : Science Languages : en Pages : 442
Book Description
A discussion of explosive pulsed power systems and their applications, this book consists of 7 chapters. The first five describe the basic physics of these sources and their ancillary equipment, based on a manual for training engineers in Russia. Chapter 6 is a description of codes and methodologies used at Loughborough University in the UK to build flux compressors, while Chapter 7 covers two specific applications: high power lasers and high power microwave sources. The book introduces all types of explosive power sources and their ancillary equipment, the procedures required to build them, and specific applications.
Author: Hans J. Schneider-Muntau Publisher: World Scientific ISBN: 9812702512 Category : Science Languages : en Pages : 749
Book Description
The generation of megagauss fields for science and technology is an exciting area at the extremes of parameter space, involving the application and controlled handling of extremely high power and energy densities in small volumes and on short time scales. New physical phenomena, technological challenges, and the selection and development of materials, together create a unique potential and synergy resulting in fascinating discoveries and achievements. This book is a collection of the contributions of an international conference, which assembled the leading scientists and engineers worldwide working on the generation and use of the strongest magnetic fields possible. Other research activities include generators that employ explosives to create ultra-high pulsed power for different applications, such as megavolt or radiation sources. Additional topics are the generation of plasmas and magnetized plasmas for fusion, imploding liners, rail guns, etc.
Author: Larry L. Altgilbers Publisher: World Scientific ISBN: 1848163223 Category : Technology & Engineering Languages : en Pages : 597
Book Description
Explosive pulsed power generators are devices that either convert the chemical energy stored in explosives into electrical energy or use the shock waves generated by explosives to release energy stored in ferroelectric and ferromagnetic materials. The objective of this book is to acquaint the reader with the principles of operation of explosive generators and to provide details on how to design, build, and test three types of generators: flux compression, ferroelectric, and ferromagnetic generators, which are the most developed and the most near term for practical applications. Containing a considerable amount of new experimental data that has been collected by the authors, this is the first book that treats all three types of explosive pulsed power generators. In addition, there is a brief introduction to a fourth type ix explosive generator called a moving magnet generator. As practical applications for these generators evolve, students, scientists, and engineers will have access to the results of a considerable body of experience gained by almost 10 years of intense research and development by the authors.
Author: Peter J. Turchi Publisher: Springer Science & Business Media ISBN: 1468410482 Category : Science Languages : en Pages : 666
Book Description
The generation and use of megagauss magnetic fields have been subjects of research and development in laboratories around the world for over a quarter of a century. Research goals have included the development of compact, short-pulse, electrical power sources and the production of ultrahigh magnetic field strengths over significant experimental volumes. Energies measured in megajoules, currents in megamperes and timescales of microseconds are not uncommon in such work. Phase changes, insulator breakdowns, and local des truction of the apparatus are also frequently encountered. Some efforts have involved the use of high explosive systems, developing methodologies rather distinct from those of a normal physics laboratory. Manipulation of magnetic flux to exchange energy between high speed, electrically conducting flows and high strength electromagnetic fields remains, of course, a basic interaction of classical physics. The remoteness of the necessary experimental sites (at least in many instances) and the various national concerns for security of defense-related research have often limited the flow of information between investigators of separate organizations, working in common areas of technical concern. Occa sionally, however, it has been possible for the community of scientists and engineers engaged in work on high magnetic fields and related high energy den sity systems to gather together and exchange results and plans, successes and failures. The first such international gathering was in 1965 at the Conference on Megagauss Magnetic Field Generation by Explosives and Related Experi ments, Frascati, Italy.
Author: Victor Kowalenko Publisher: ISBN: 9780642120915 Category : Magnetic flux Languages : en Pages : 11
Book Description
The magnetic flux and the inductance due to the current passing through a plasma armature in an electromagnetic launcher is evaluated assuming that the current distribution within the armature is uniform. The expressions derived in this report are then used by the computer program PLAFLUX. FOR to generate values for the plasma armatures inductance and magnetic flux during acceleration. It is shown that the plasma armature's inductance is negligible in comparison with the rail inductance. Keywords: Railgun accelerators; Plasma armatures; Inductance; Magnetic fields; Electromagnetic launchers; Australia.
Author: National Aeronautics and Space Administration (NASA)
Author: National Aeronautics and Space Administration (NASA)
Author: M. W. Turner
Author: Andreas A. Neuber
Author: Dimitry Mikitchuk
Author: Larry L. Altgilbers
Author: Hans J. Schneider-Muntau
Author: Larry L. Altgilbers
Author: Peter J. Turchi
Author: Victor Kowalenko
Author: