Author: David Nethercot Publisher: CRC Press ISBN: 020330182X Category : Technology & Engineering Languages : en Pages : 294
Book Description
This textbook is a comprehensive introduction to structural steelwork design based on the limit states approach to BS 5950, for use by undergraduates in civil and structural engineering. It will also serve as a reference for practising engineers unfamiliar with new parts of BS 5950. The text introduces basic properties of steel, types of steel structure and steelwork design in order to develop an understanding of the various aspects of the behaviour and design of structural steelwork. This edition has been thoroughly revised in accordance with the 2000 amendment to Part 1 of BS 5950 - all references have been updated and a new section on partial encasement for fire resistance has been added. Each chapter features worked examples, practice problems and references.
Author: Dennis Lam Publisher: CRC Press ISBN: 1466552107 Category : Technology & Engineering Languages : en Pages : 378
Book Description
Completely revised and updated, this fourth edition of Structural Steelwork: Design to Limit State Theory describes the design theory and code requirements for common structures, connections, elements, and frames. It provides a comprehensive introduction to structural steelwork design with detailed explanations of the principles underlying steel design. See what’s in the Fourth Edition: All chapters updated and rearranged to comply with Eurocode 3 Compliant with the other Eurocodes Coverage of both UK and Singapore National Annexes Illustrated with fully worked examples and practice problems The fourth edition of an established and popular text, the book provides guidance for students of structural and civil engineering and is also sufficiently informative for practising engineers and architects who need an introduction to the Eurocodes.
Author: A.B. Clarke Publisher: CRC Press ISBN: 1000942821 Category : Technology & Engineering Languages : en Pages : 300
Book Description
A comprehensive reference which provides the student and the engineer with in-depth guidance on design methods to the UK code of practice for structural steelwork, BS 5950. The design procedures are presented in a series of well-defined steps illustrated with worked examples.
Author: Geoffrey L. Kulak Publisher: ISBN: 9780888111975 Category : Building, Iron and steel Languages : en Pages : 417
Book Description
The Tenth Edition of this text introduces the changes in the 2014 edition of CSA-S16 standard and the 2013 edition of CSA-G40.20/G40.21. Since this textbook is intended to be used in conjunction with the 11th edition of the CISC Handbook of steel construction, the changes in the Handbook have also been adopted in the textbook. These changes, which reflect changes in the steel inductr4y, include adjustments to rolled steel shapes section properties to reflect a change in the flange to web transition radius, the deletion of some rolled shapes and welded wide flange (WWF) sections that are no longer produced in North American mills. With an expanding global market, some structural steel shapes, such as rolled wide flange sections, are becoming more prevalent in American steel grades (ASTM classification) whereas some shapes, such as plates, are still readily available in Canadian steel grades (CSA-G40.21 classification). Therefore American grade steels have been introduced in some of the design examples. Furthermore, since metric size bolts are only rarely used in the construction industry, the design tables for bolts and bolted connections presented in the CISC Handbook have abandoned metric size bolts. Therefore, imperial size bolts are mainly used in this new edition of the text. Divided into 11 chapters, the book covers tension members, flexural members, columns, beam-columns, stability, fatigue behaviour, connections, plate girders, composite construction, and types and grades of structural steel.
Author: Ramchandra Publisher: Scientific Publishers ISBN: 9387869741 Category : Technology & Engineering Languages : en Pages : 1088
Book Description
Method of Limit State (Ultimate Limit State, (ULS) and serviceability limit state (SLS)) present an improved design philosophy and makes allow-ance for the short-compings of working stress method (conventional and long time used in practice). This method provides basic framework, within which the performance of the steel structures may be assessed against various limiting conditions and invo-lves some concept of probability. Object of limit design method is to get steel structure that will remain fit for use during its life with acceptable target reliability. The probability of a limit state being reached during its life time is kept very small. This method has been broadly adopted in many developed countries and based on the recommendations of IS: 800-2007 (Third Revised Edition). This method has been covered in nine parts (in twenty six chapters and four appendices) as listed in contents. After introducing `Limit State Method of Design of Concrete Structures (LSD: CC) in IS: 456-1978, it was natural for Bureau of Indian Standard to introduce `Limit State Design of Steel Structures (LSD: SS). SI units for text for complete book, uncertainties involved in the working stress method and the concept of partial safety factors for the loads and strength of mate-rials (for yield and ultimate stresses reached) are the special feature of the book. Concepts of shear centre for thin-walled beam cross-sections and unsymmetrical bending of beams are important for various requirements and have been included in appendices. The text of book has been covered in about 1000 pages and 550 diagrams. The texts of various topics has been explained in many illustrative worked-out examples.
Author: M. R. SHIYEKAR Publisher: PHI Learning Pvt. Ltd. ISBN: 8120347846 Category : Technology & Engineering Languages : en Pages : 416
Book Description
The second edition has incorporated all the revisions necessitated after the issue of Amendment No. 1 of January 2012 to IS 800:2007. The book is primarily designed for the students of civil/structural engineering at all levels of studies—undergraduate, postgraduate and diploma—as well as for the professionals in the field of structural steel design. It covers the fundamental concepts of steel design in the perspective of the limit state design concept as per IS 800:2007, with the focus on cost-effective design of industrial structures, foot bridges, portal frames, and pre-engineered buildings. The connection design details are discussed concurrently with the design of members. The book covers the subject matter, with the help of numerous practical illustrations accompanied by step-by-step design calculations and detail-ing, in 14 chapters—including a chapter on pre-engineered buildings. Solved examples as well as exercises are provided in each chapter to enable the development of a strong understanding of the underlying concepts and for testing the comprehension acquired by the students. The geometrical properties of rolled steel sections, often required as per the revised clauses of IS 800:2007 and not appearing in the existing steel tables, are given in the Appendix A for ready reference.
Author: David Nethercot Publisher: CRC Press ISBN: 0419260900 Category : Technology & Engineering Languages : en Pages : 304
Book Description
This textbook is a comprehensive introduction to structural steelwork design based on the limit states approach to BS 5950, for use by undergraduates in civil and structural engineering. It will also serve as a reference for practising engineers unfamiliar with new parts of BS 5950. The text introduces basic properties of steel, types of steel structure and steelwork design in order to develop an understanding of the various aspects of the behaviour and design of structural steelwork. This edition has been thoroughly revised in accordance with the 2000 amendment to Part 1 of BS 5950 - all references have been updated and a new section on partial encasement for fire resistance has been added. Each chapter features worked examples, practice problems and references.
Author: Peter Frederick Adams Publisher: [Willowdale, Ont.] : Canadian Institute of Steel Construction ISBN: 9780888110589 Category : Building, Iron and steel Languages : en Pages : 334
Author: Geoffrey L. Kulak Publisher: ISBN: 9780888111395 Category : Building, Iron and steel Languages : en Pages : 403
Book Description
"The Ninth Edition reflects changes in CSA Standard S16-09, "Design of Steel Structures", regarding bolted and welded connections, laterally unsupported beams, block shear and composite beams. This tbook serves as a comprehensive teaching text for universities and technical colleges, and also as a valuable reference document for practicing engineers. It offers an explanation of the philosophy and practical application of limit states design procedures and provides comments on design requirements contained in S16-09. Divided into 11 chapters, the book covers tension members, flexural members, columns, beam-columns, stability, fatigue behaviour, connections, plate girders, composite construction, and types and grades of structural steel."--[Résumé de l'éditeur].
Author: David Nethercot
Author: Dennis Lam
Author: A.B. Clarke
Author: Geoffrey L. Kulak
Author: D. A. Nethercot
Author: Ramchandra
Author: M. R. SHIYEKAR
Author: David Nethercot
Author: Peter Frederick Adams
Author: Geoffrey L. Kulak