Author: Anming Hu Publisher: Springer Nature ISBN: 3030593134 Category : Science Languages : en Pages : 360
Book Description
This book provides a comprehensive overview of the latest advances in laser techniques for micro-nano-manufacturing and an in-depth analysis of applications, such as 3D printing and nanojoining. Lasers have gained increasing significance as a precise tool for advanced manufacturing. Written by world leading scientists, the first part of the book presents the fundamentals of laser interaction with materials at the micro- and nanoscale, including multiphoton excitation and nonthermal melting, and allows readers to better understand advanced processing. In the second part, the authors focus on various advanced fabrications, such as laser peening, surface nanoengineering, and plasmonic heating. Finally, case studies are devoted to special applications, such as 3D printing, microfluidics devices, energy devices, and plasmonic and photonic waveguides. This book integrates both theoretical and experimental analysis. The combination of tutorial chapters and concentrated case studies will be critically attractive to undergraduate and graduate students, researchers, and engineers in the relevant fields. Readers will grasp the full picture of the application of laser for micro-nanomanufacturing and 3D printing.
Author: Koji Sugioka Publisher: MDPI ISBN: 3038974102 Category : Science Languages : en Pages : 155
Book Description
This book is a printed edition of the Special Issue "Laser-Based Nano Fabrication and Nano Lithography" that was published in Nanomaterials
Author: Matthew N. O. Sadiku Publisher: Springer Nature ISBN: 3031231562 Category : Technology & Engineering Languages : en Pages : 297
Book Description
The manufacturing industry is a cornerstone of national economy and people’s livelihood. It is the way of transforming resources into products or goods which are required to cater to the needs of the society. Traditional manufacturing companies currently face several challenges such as rapid technological changes, inventory problem, shortened innovation, short product life cycles, volatile demand, low prices, highly customized products, and ability to compete in the global markets. Modern manufacturing is highly competitive due to globalization and fast changes in the global market. This book reviews emerging technologies in manufacturing. These technologies include artificial intelligence, smart manufacturing, lean manufacturing, robotics, automation, 3D printing, nanotechnology, industrial Internet of things, and augmented reality. The use of these technologies will have a profound impact on the manufacturing industry. The book consists of 19 chapters. Each chapter addresses a single emerging technology in depth and describes how manufacturing organizations are adopting the technology. The book fills an important niche for manufacturing. It is a comprehensive, jargon-free introductory text on the issues, ideas, theories, and problems on emerging technologies in manufacturing. It is a must-read book for beginners or anyone who wants to be updated about emerging technologies.
Author: Stephen Pearton Publisher: Springer Science & Business Media ISBN: 3642235212 Category : Technology & Engineering Languages : en Pages : 497
Book Description
The AlInGaN and ZnO materials systems have proven to be one of the scientifically and technologically important areas of development over the past 15 years, with applications in UV/visible optoelectronics and in high-power/high-frequency microwave devices. The pace of advances in these areas has been remarkable and the wide band gap community relies on books like the one we are proposing to provide a review and summary of recent progress.
Author: Alberto Piqué Publisher: John Wiley & Sons ISBN: 3527805133 Category : Technology & Engineering Languages : en Pages : 474
Book Description
The first book on this hot topic includes such major research areas as printed electronics, sensors, biomaterials and 3D cell printing. Well-structured and with a strong focus on applications, the text is divided in three sections with the first describing the fundamentals of laser transfer. The second provides an overview of the wide variety of materials that can be used for laser transfer processing, while the final section comprehensively discusses a number of practical uses, including printing of electronic materials, printing of 3D structures as well as large-area, high-throughput applications. The book is rounded off by a look at the future for laser printed materials. Invaluable reading for a broad audience ranging from material developers to mechanical engineers, from academic researchers to industrial developers and for those interested in the development of micro-scale additive manufacturing techniques.
Author: Amir Zjajo Publisher: Springer Science & Business Media ISBN: 9400777817 Category : Technology & Engineering Languages : en Pages : 207
Book Description
One of the most notable features of nanometer scale CMOS technology is the increasing magnitude of variability of the key device parameters affecting performance of integrated circuits. The growth of variability can be attributed to multiple factors, including the difficulty of manufacturing control, the emergence of new systematic variation-generating mechanisms, and most importantly, the increase in atomic-scale randomness, where device operation must be described as a stochastic process. In addition to wide-sense stationary stochastic device variability and temperature variation, existence of non-stationary stochastic electrical noise associated with fundamental processes in integrated-circuit devices represents an elementary limit on the performance of electronic circuits. In an attempt to address these issues, Stochastic Process Variation in Deep-Submicron CMOS: Circuits and Algorithms offers unique combination of mathematical treatment of random process variation, electrical noise and temperature and necessary circuit realizations for on-chip monitoring and performance calibration. The associated problems are addressed at various abstraction levels, i.e. circuit level, architecture level and system level. It therefore provides a broad view on the various solutions that have to be used and their possible combination in very effective complementary techniques for both analog/mixed-signal and digital circuits. The feasibility of the described algorithms and built-in circuitry has been verified by measurements from the silicon prototypes fabricated in standard 90 nm and 65 nm CMOS technology.
Author: Irene Fassi Publisher: Springer ISBN: 331939651X Category : Technology & Engineering Languages : en Pages : 301
Book Description
This book provides in-depth theoretical and practical information on recent advances in micro-manufacturing technologies and processes, covering such topics as micro-injection moulding, micro-cutting, micro-EDM, micro-assembly, micro-additive manufacturing, moulded interconnected devices, and microscale metrology. It is designed to provide complementary material for the related e-learning platform on micro-manufacturing developed within the framework of the Leonardo da Vinci project 2013-3748/542424: MIMAN-T: Micro-Manufacturing Training System for SMEs. The book is mainly addressed to technicians and prospective professionals in the sector and will serve as an easily usable tool to facilitate the translation of micro-manufacturing technologies into tangible industrial benefits. Numerous examples are included to assist readers in learning and implementing the described technologies. In addition, an individual chapter is devoted to technological foresight, addressing market analysis and business models for micro-manufacturers.
Author: KOJI SUGIOKA. Publisher: ISBN: 9783319695372 Category : Lasers in engineering Languages : en Pages :
Book Description
This handbook provides a comprehensive review of the entire field of laser micro and nano processing, including not only a detailed introduction to individual laser processing techniques but also the fundamentals of laser-matter interaction and lasers, optics, equipment, diagnostics, as well as monitoring and measurement techniques for laser processing. Consisting of 11 sections, each composed of 4 to 6 chapters written by leading experts in the relevant field. Each main part of the handbook is supervised by its own part editor(s) so that high-quality content as well as completeness are assured. The book provides essential scientific and technical information to researchers and engineers already working in the field as well as students and young scientists planning to work in the area in the future. Lasers found application in materials processing practically since their invention in 1960, and are currently used widely in manufacturing. The main driving force behind this fact is that the lasers can provide unique solutions in material processing with high quality, high efficiency, high flexibility, high resolution, versatility and low environmental load. Macro-processing based on thermal process using infrared lasers such as CO2 lasers has been the mainstream in the early stages, while research and development of micro- and nano-processing are becoming increasingly more active as short wavelength and/or short pulse width lasers have been developed. In particular, recent advances in ultrafast lasers have opened up a new avenue to laser material processing due to the capabilities of ultrahigh precision micro- and nanofabrication of diverse materials. This handbook is the first book covering the basics, the state-of-the-art and important applications of the dynamic and rapidly expanding discipline of laser micro- and nanoengineering. This comprehensive source makes readers familiar with a broad spectrum of approaches to solve all relevant problems in science and technology. This handbook is the ultimate desk reference for all people working in the field.
Author: Anming Hu
Author: Koji Sugioka
Author: Matthew N. O. Sadiku
Author: Stephen Pearton
Author: Alberto Piqué
Author: Zheng Cui (author)
Author: Amir Zjajo
Author: Irene Fassi
Author: Kuldeep Mahato
Author: KOJI SUGIOKA.