Author: Union Carbide Metals Company. Metals Research Laboratories
Publisher:
ISBN:
Category : Tungsten
Languages : en
Pages : 110
Book Description
Investigation of the Properties of Tungsten and Its Alloys
Author: Union Carbide Metals Company. Metals Research Laboratories
Publisher:
ISBN:
Category : Tungsten
Languages : en
Pages : 110
Book Description
Publisher:
ISBN:
Category : Tungsten
Languages : en
Pages : 110
Book Description
Investigation of the Properties of Tantalum and Its Alloys
Author: Frank F. Schmidt
Publisher:
ISBN:
Category : Tantalum
Languages : en
Pages : 168
Book Description
Publisher:
ISBN:
Category : Tantalum
Languages : en
Pages : 168
Book Description
Tungsten
Author: Erik Lassner
Publisher: Springer Science & Business Media
ISBN: 1461549078
Category : Science
Languages : en
Pages : 432
Book Description
Why does someone write a book about Tungsten? There are several reasons and precedents for this, the most important of which is that the last book on tungsten was written more than 20 years ago, in 1977, by St. W H. Yih and Ch T. Wang. During the intervening period there have been many new scientific and technological developments and innova tions, so it was not only our opinion but the view of many other members of the "tungsten family" that it was time to start writing a new book about tungsten. Preparations of the new book began in 1994. further impetus to the project was provided by the realization that in spite of this new knowledge having been presented at seminars or published in the technical press, a general acknowledgement of it by the majority of technicians and scientists is still far from being realized. It is our hope that this book will significantly contribute to a broader acceptance of recent scientific and technological innovations. An important prerequisite for such a project is the availability of a recently retired, experienced person willing to devote his time and talents to the tedious part of the exercise.
Publisher: Springer Science & Business Media
ISBN: 1461549078
Category : Science
Languages : en
Pages : 432
Book Description
Why does someone write a book about Tungsten? There are several reasons and precedents for this, the most important of which is that the last book on tungsten was written more than 20 years ago, in 1977, by St. W H. Yih and Ch T. Wang. During the intervening period there have been many new scientific and technological developments and innova tions, so it was not only our opinion but the view of many other members of the "tungsten family" that it was time to start writing a new book about tungsten. Preparations of the new book began in 1994. further impetus to the project was provided by the realization that in spite of this new knowledge having been presented at seminars or published in the technical press, a general acknowledgement of it by the majority of technicians and scientists is still far from being realized. It is our hope that this book will significantly contribute to a broader acceptance of recent scientific and technological innovations. An important prerequisite for such a project is the availability of a recently retired, experienced person willing to devote his time and talents to the tedious part of the exercise.
Nanostructures and Enhanced Properties in Tungsten and Its Alloys Processed by Equal Channel Angular Pressing
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
In this connection, in the frame of the third period of the present project there have been conducted experimental investigations, aimed at equal channel angular pressing (ECAP) optimization of the investigated W and the 90W-8Ni-2Fe alloy. The problem of this task consists in enhancing workability of these hard-to-deform materials and achieving large strains, The influence of the accumulated strain degree the thickness of protection casing, the rate and strain temperatures on grain size and homogeneity of the obtained structure have been investigated as parameters, determining ECAP results. ECAP has been realized on route C, which turns out to be the most effective route for the given case, as it has been found out at first stages of the project.
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
In this connection, in the frame of the third period of the present project there have been conducted experimental investigations, aimed at equal channel angular pressing (ECAP) optimization of the investigated W and the 90W-8Ni-2Fe alloy. The problem of this task consists in enhancing workability of these hard-to-deform materials and achieving large strains, The influence of the accumulated strain degree the thickness of protection casing, the rate and strain temperatures on grain size and homogeneity of the obtained structure have been investigated as parameters, determining ECAP results. ECAP has been realized on route C, which turns out to be the most effective route for the given case, as it has been found out at first stages of the project.
Preparation of Tungsten and Its Alloys by Bomb Reduction
Author: Philip C. Good
Publisher:
ISBN:
Category : Tungsten
Languages : en
Pages : 18
Book Description
Publisher:
ISBN:
Category : Tungsten
Languages : en
Pages : 18
Book Description
Physical Metallurgy of Tungsten and Tungsten Alloys
Author: Westinghouse Electric Corporation. Westinghouse Lamp Division
Publisher:
ISBN:
Category : Tungsten
Languages : en
Pages : 334
Book Description
Publisher:
ISBN:
Category : Tungsten
Languages : en
Pages : 334
Book Description
Development and Evaluation of High-temperature Tungsten Alloys
Author: Armour Research Foundation (U.S.)
Publisher:
ISBN:
Category : Tungsten alloys
Languages : en
Pages : 34
Book Description
Publisher:
ISBN:
Category : Tungsten alloys
Languages : en
Pages : 34
Book Description
Investigation of the Mechanical Properties of Ultra-pure Tungsten
Author: Massachusetts Institute of Technology. Department of Metallurgy
Publisher:
ISBN:
Category :
Languages : en
Pages : 73
Book Description
Contents: Electron-beam zone melting Yielding and plastic flow in single crystals of tungsten Deformation of tantalum single crystals Flow and fracture of high purity tantalum tungsten alloys in the ductile-brittle transi tion region Void formation in tungsten above 2800 C.
Publisher:
ISBN:
Category :
Languages : en
Pages : 73
Book Description
Contents: Electron-beam zone melting Yielding and plastic flow in single crystals of tungsten Deformation of tantalum single crystals Flow and fracture of high purity tantalum tungsten alloys in the ductile-brittle transi tion region Void formation in tungsten above 2800 C.
The Engineering Properties of Tungsten and Tungsten Alloys
Author: F. F. Schmidt
Publisher:
ISBN:
Category : Tungsten
Languages : en
Pages : 164
Book Description
The results of a state-of-the-art survey covering tungsten and ten of its alloys are presented. All data are given in tabular and graphical form covering some of the more important physical, mechanical, and metallurgical properties for each material. References are given at the conclusion of each material section.
Publisher:
ISBN:
Category : Tungsten
Languages : en
Pages : 164
Book Description
The results of a state-of-the-art survey covering tungsten and ten of its alloys are presented. All data are given in tabular and graphical form covering some of the more important physical, mechanical, and metallurgical properties for each material. References are given at the conclusion of each material section.
Tungsten Research and Development Review
Author: J. L. Ratliff
Publisher:
ISBN:
Category : Research and development projects
Languages : en
Pages : 70
Book Description
Government-sponsored tungsten research and development efforts encompass a broad rage of technological activities. Typifying the extreme limits of efforts since January, 1960, studies have ranged from preparation of unalloyed metal to development of high-integrity fabricated shapes of tungsten-base materials. Nine major areas outline the broad over-all effort, and each is summarized within this report by brief technical discussions of 104 separate studies on 79 research programs. Included are preparation of metal, consolidation, primary and secondary working, joining, fabrication and performance of rocket nozzles, oxidation and other high-temperature reactions, protective coatings, properties, and physical metallurgy.
Publisher:
ISBN:
Category : Research and development projects
Languages : en
Pages : 70
Book Description
Government-sponsored tungsten research and development efforts encompass a broad rage of technological activities. Typifying the extreme limits of efforts since January, 1960, studies have ranged from preparation of unalloyed metal to development of high-integrity fabricated shapes of tungsten-base materials. Nine major areas outline the broad over-all effort, and each is summarized within this report by brief technical discussions of 104 separate studies on 79 research programs. Included are preparation of metal, consolidation, primary and secondary working, joining, fabrication and performance of rocket nozzles, oxidation and other high-temperature reactions, protective coatings, properties, and physical metallurgy.