Investigation of the Fracture Resistance of Asphalt Mixtures at Low Temperatures with a Semi Circular Bend (SCB) Test PDF Download

Author: Xue Li
Publisher:
ISBN:
Category :
Languages : en
Pages : 266

View

Book Description

Author: Hainian Wang
Publisher:
ISBN:
Category : Flexural tensile strength
Languages : en
Pages : 9

View

Book Description
The objective of this study was to assess the low temperature anti-cracking performance of crumb rubber modified asphalt mixtures by performing the semi-circular bending tests. The flexural tensile strength, fracture energy density, and fracture resistance were used to evaluate the rubber modified asphalt mixture's performance based on fracture mechanics J-integral concept. The semi-circular bending (SCB) tests were conducted to study the effect of crumb rubber dosage, crumb rubber size, and testing temperature on the low temperature anti-cracking performance of rubber modified asphalt mixtures. Two gradations (a dense gradation mixture and a gap-gradation mixture) were selected, and five rubber application dosages (15, 18, 20, 22, and 25 %, all by the weight of base binder) were studied in the paper. The tests were performed at temperatures of 0, -10, and -20°C. The testing results indicated that the flexural tensile strength and fracture energy density increased initially, reached to a peak point and then decreased with the increase of rubber dosage. Flexural tensile strength and fracture energy density reached its maximum value at the 20 % rubber dosage among the five rubber application dosages. The flexural tensile strength, fracture energy density, and the J-integral fracture toughness of the gap-graded rubber asphalt mixture specimens were higher than those of the dense gradation. The smaller sized particle rubber modified mixture provided a better low temperature anti-cracking performance as compared to those with bigger particle sizes. Through the comprehensive consideration of laboratory test results and field results, it was recommended that the J-integral fracture toughness should be no less than 2.8 KJ/m2 for new asphalt rubber pavement in Shannxi province.

Author: Gabriel Nsengiyumva
Publisher:
ISBN:
Category : Pavements, Asphalt concrete
Languages : en
Pages : 83

View

Book Description
Granted that most distresses in asphalt (flexible) concrete (AC) pavements are directly related to fracture, it becomes clear that identifying and characterizing fracture properties of AC mixtures is a critical step towards a better pavement design. This thesis examines the testing variables of a reliable and practical semicircular bending (SCB) test for evaluating the fracture characteristics of asphalt concrete mixtures at intermediate service temperature conditions. The first part of this thesis investigates the repeatability of the SCB fracture test method by integrating a statistical-experimental approach to identify testing variables of the SCB test that result in repeatable test results. Toward this end, five testing variables (the number of testing specimens, specimen thickness, notch length, loading rate, and testing temperature) of the SCB test were investigated due to their significant effects on mixture fracture characteristics. After statistical analysis of 18 specimens tested a typical testing variables, approximately, five to six specimens/replicates were found to be a reasonable sample size that could properly represent asphalt concrete fracture behavior using the SCB test method. The coefficient of variation (COV) of the mixture fracture energy was used to evaluate the effect of each variable on the repeatability of test results. A range of 1 mm/min. to 5 mm/min. for the loading rate, a notch length from 5 mm to 25 mm, and a specimen thickness of 40 mm to 60 mm and a testing temperature of 15-40°C showed the lowest variation of fracture energy. The second part of this work is to investigate the sensitivity of the SCB test using the previously determined testing variables. Fourteen different asphalt concrete (AC) mixtures collected from 12 field construction projects in Nebraska were used in this task. The ANOVA test showed statistically significant differences between mixtures at a 95% confidence level. Tukey's HSD multiple-comparison analysis found similarities within mixtures of same types and significant difference between mixtures types. In addition, the fracture energy of bituminous mixtures increased with increasing amount of virgin asphalt content in mixture. Overall, the SCB test method developed herein proved to be repeatable and sensitive to changes in mixtures, and thus a promising tool for evaluating the fatigue fracture resistance of AC mixtures.

Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 26

View

Book Description

Author: C. Petit
Publisher: RILEM Publications
ISBN: 9782912143471
Category : Pavements
Languages : en
Pages : 748

View

Book Description

Author: Z. Wu
Publisher:
ISBN:
Category : Energy release rate
Languages : en
Pages : 15

View

Book Description
The fracture resistance of asphalt mixture is an important property directly related to pavement distresses, such as cracking. This paper reports the investigation of a newly-developed semicircular bending (SCB) test as a candidate test for the fracture resistance characterization of asphalt mixtures. Thirteen Superpave mixtures, designed with four different binder types (AC-30, PAC-40, PG70-22M, and PG76-22M) and four different compaction levels (Ndesign = 75, 97, 109, and 125), were considered in this study. The SCB tests were conducted at 25°C using a three-point bending fixture in a MTS testing system. The fracture resistance was analyzed based on an elasto-plastic fracture mechanics concept of critical strain energy release rate, also called the critical value of J-integral (Jc). Preliminary results indicate that the JC values were fairly sensitive to changes in binder type and nominal maximum aggregate size (NMAS) used in Superpave mixtures. This study suggests that the SCB test could be a valuable correlative tool in the evaluation of fracture resistance of asphalt mixtures.

Author: Hervé Di Benedetto
Publisher: Springer Nature
ISBN: 3030464555
Category : Technology & Engineering
Languages : en
Pages : 1806

View

Book Description
This volume highlights the latest advances, innovations, and applications in bituminous materials and structures and asphalt pavement technology, as presented by leading international researchers and engineers at the RILEM International Symposium on Bituminous Materials (ISBM), held in Lyon, France on December 14-16, 2020. The symposium represents a joint effort of three RILEM Technical Committees from Cluster F: 264-RAP “Asphalt Pavement Recycling”, 272-PIM “Phase and Interphase Behaviour of Bituminous Materials”, and 278-CHA “Crack-Healing of Asphalt Pavement Materials”. It covers a diverse range of topics concerning bituminous materials (bitumen, mastics, mixtures) and road, railway and airport pavement structures, including: recycling, phase and interphase behaviour, cracking and healing, modification and innovative materials, durability and environmental aspects, testing and modelling, multi-scale properties, surface characteristics, structure performance, modelling and design, non-destructive testing, back-analysis, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster new multidisciplinary collaborations.

Author:
Publisher:
ISBN:
Category : Asphalt
Languages : en
Pages : 94

View

Book Description
In this study, the viability of using three test methods for asphalt mixtures and one test method for asphalt binders are investigated. These test methods are: Bending Beam Rheometer (BBR) for creep and strength of asphalt mixtures; low temperature Semi Circular Bend (SCB) test for fracture energy of asphalt mixtures; Dynamic Modulus (E*) test of asphalt mixtures using the Indirect Tensile Test (IDT) configuration; and BBR strength test of asphalt binders. The materials used in the experimental work were used in MnROAD cells constructed in the summer of 2016 as part of the MnROAD Cracking Group (CG) experiment, a 3-year pooled-fund project. The results show that the testing methods investigated provide repeatable results that follow trends similar to the one observed using traditional methods. The results also show that the properties are highly temperature dependent and the ranking observed at one temperature can change at a different temperature. In addition, it is observed that materials with similar rheological properties, such as complex modulus absolute value E*, creep stiffness S, and m-value, do not necessarily have the same fracture resistance. These results confirm one more time the need for a fracture/strength test for correctly evaluating cracking resistance of asphalt materials.

Author: Sadjad Pirmohammad
Publisher: Springer Nature
ISBN: 3030399745
Category : Technology & Engineering
Languages : en
Pages : 229

View

Book Description
This book discusses the applications of fracture mechanics in the design and maintenance of asphalt concrete overlays. It provides useful information to help readers understand the effects of different material and loading type parameters on the fracture properties of asphalt concretes. It also reviews relevant numerical and experimental studies, and describes in detail design parameters such as aggregate type, air void, loading mode, and additives, based on the authors experience and that of other researchers.

Author: Gabriel Nsengiyumva
Publisher:
ISBN:
Category : Pavements, Asphalt
Languages : en
Pages : 60

View

Book Description
"Granted that most distresses in asphalt (flexible) concrete (AC) pavements are directly related to fracture, it becomes clear that identifying and characterizing fracture properties of AC mixtures is a critical step towards a better pavement design. This report examines the testing variables of a reliable and practical semicircular bending (SCB) test for evaluating the fracture characteristics of asphalt concrete mixtures at intermediate service temperature conditions. The first part of this report investigates the repeatability of the SCB frature test method by integrating a statistical-experimental approach to identify testing variables of the SCB test that result in repeatable test results. . . . The second part of this work is to investigate the sensitivity of the SCB test using the previously determined testing variables. Fourteen different asphalt concrete (AC) mixtures collected from 12 field construction projects in Nebraska were used in this task. . . . Overall, the SCB test method developed herein proved to be repeatable and sensitive to changes in mixtures, and thus a promising tool for evaluating the fatigue fracture resistance of AC mixtures" (page ii).