Author: Rodolfo TromelliniPublisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
Investigation of Post-oxidation by Means of 3D-CFD Virtual Engine Development
Author: Rodolfo TromelliniSimulative Investigation of Post-Oxidation in the Exhaust Manifold of SI Engines
Author: Jan PrzewlockiPublisher: Springer Nature
ISBN: 3658363789
Category : Technology & Engineering
Languages : en
Pages : 177
Book Description
Jan Przewlocki provides a deep insight into the post-oxidation processes in an exhaust manifold of an SI engine. Besides the evaluation of 3D-CFD simulation results, tools are developed to evaluate them in a target-oriented way. In addition, a 1D post-oxidation simulation model was developed that is capable of reliably predicting post-oxidation effects within the exhaust manifold. This study shows the development process of the 1D model approach and elaborates its strengths and weaknesses.
Investigation of Innovative Water Injection Strategies for Gasoline Engines by Means of a 3D-CFD Virtual Engine Test Bench
Author: Edoardo RossiPublisher: Springer Nature
ISBN: 3658449411
Category : Automobiles
Languages : en
Pages : 185
Book Description
This book focuses on the investigation of innovative engine technologies that can improve the efficiency of internal combustion engines and reduce their environmental impact. In particular, water injection is examined as a means of improving engine behavior. The possible combination of water injection with renewable fuels is also a topic of the book. The results of this experimental and numerical research show positive results that can be used for further research and development of engines. Content 3D-CFD Simulation Environment: the Virtual Engine Test Bench Experimental Spray Analysis and 3D-CFD Injection Model Calibration Applicability of Water Injection in Combination with an eFuel Water-in-Fuel Emulsions at the Virtual Engine Test Bench Target Groups Students and researchers in the field of automotive engineering, esp. engine technology Engineers in the automotive industry About the Author Edoardo Rossi is a project manager in the virtual engine development department at the FKFS, where he did his PhD. He works on innovative solutions for future powertrain technologies for motor vehicles. .
An Innovative 3D-CFD-Approach towards Virtual Development of Internal Combustion Engines
Author: Marco ChiodiPublisher: Springer Science & Business Media
ISBN: 3834881317
Category : Technology & Engineering
Languages : en
Pages : 275
Book Description
In the engine development process, simulation and predictive programs have continuously gained in reliance. Due to the complexity of future internal combustion engines the application of simulation programs towards a reliable “virtual engine development” is a need that represents one of the greatest challenges. Marco Chiodi presents an innovative 3D-CFD-tool, exclusively dedicated and optimized for the simulation of internal combustion engines. Thanks to improved or newly developed 3D-CFD-models for the description of engine processes, this tool ensures an efficient and reliable calculation also by using coarse 3D-CFD-meshes. Based on this approach the CPU-time can be reduced up to a factor 100 in comparison to traditional 3D-CFD-simulations. In addition an integrated and automatic “evaluation tool” establishes a comprehensive analysis of the relevant engine parameters. Due to the capability of a reliable “virtual development” of full-engines, this fast response 3D-CFD-tool makes a major contribution to the engine development process. Südwestmetall-Förderpreis 2010
Scientific and Technical Aerospace Reports
Author: ASEE 1995-1996 Profiles of Engineering & Engineering Technology Colleges
Author: ASEE ... Profiles of Engineering & Engineering Technology Colleges
Author: Annual Index/abstracts of SAE Technical Papers
Author: Technical Literature Abstracts
Author: Society of Automotive EngineersPublisher:
ISBN:
Category : Technical literature
Languages : en
Pages : 664
Book Description
La Modélisation multidimensionnelle des écoulements dans les moteurs
Author: Thierry BaritaudPublisher: Editions TECHNIP
ISBN: 9782710807711
Category : Technology & Engineering
Languages : en
Pages : 212
Book Description
With an increasingly challenging commercial environment, and the need imposed by safety principles to reduce both fuel consumption and pollutant emissions, the development of new engines can now benefit from the advances of computational fluid dynamics. Engine CFD is a most challenging simulation problem. This is caused by the spread of time and space scales, the excursion amplitude of most parameters, the high quasi-cyclic unstationarity of engine flows, the importance of minor geometry details, the number of physical and chemical processes including turbulent combustion and multi-phase flows to model. However, engine CFD has now reached a state where it has become a widely used tool, not only for engine understanding, but also increasingly for engine design. Undoubtedly, laser diagnostics in optical access engines have also brought significant help.Contents: 1. State of the art of multi-dimensional modeling of engine reacting flows. 2. Simulation of the intake and compression strokes of a motored 4-valve SI engine with a finite element code. 3. A parallel, unstructured-mesh methodology for device-scale combustion calculations. 4. Large-eddy simulation of in-cylinder flows. 5. Simulation of engine internal flows using digital physics. 6. Automatic block decomposition of parametrically changing volumes. 7. Developments in spray modeling in diesel and direct-injection gasoline engines. 8. Cyto-fluid dynamic theory of atomization processes. 9. Influence of the wall temperature on the mixture preparation in DI gasoline engines. 10. Simulation of cavitating flows in diesel injectors. 11. Recent developments in simulations of internal flows in high pressure swirl injectors. 12. 3D simulation of DI diesel combustion and pollutant formation using a two-component reference fuel. 13. Modeling of NOx and soot formation in diesel combustion. 14. Multi-dimensional modeling of combustion and pollutants formation of new technology light duty diesel engines. 15. 3D modeling of combustion for DI-SI engines. 16. Combustion modeling with the G-equation. 17. Multi-dimensional modeling of the aerodynamic and combustion in diesel engines. 18. CFD aided development of a SI-DI engine. 19. CFD engine applications at FIAT research centre. 20. Application of a detailed emission model for heavy duty diesel engine simulations. 21. CFD based shape optimization of IC engine.