Author: Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Investigation of Optical Loss Mechanisms in Oxide Thin Films
Author: Optical Investigation of Metal-oxide Thin Films
Author: Valter KiiskPublisher:
ISBN: 9789949114146
Category : Metallic oxides
Languages : en
Pages : 132
Book Description
Energy Research Abstracts
Author: Addressing Optical, Recombination and Resistive Losses in Crystalline Silicon Solar Cells
Author: Thomas Gerald AllenPublisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
The performance of any photovoltaic device is determined by its ability to mitigate optical, recombination, and resistive energy losses. This thesis investigates new materials and nascent technologies to address these energy loss mechanisms in crystalline silicon solar cells. Optical losses, specifically the suppression of energy losses resulting from front surface reflection, are first analysed. The use of reactive ion etched black silicon texturing, a nano-scale surface texture, is assessed with respect to the two conventional texturing processes: isotexture and random pyramids. While nano-scale surface textures offer a means of almost eliminating front surface reflection, relatively poor internal optical properties (i.e. light trapping) compared to both conventional textures can compromise any optical gains realised on the front surface. It is also shown that enhanced recombination losses remains a barrier to the application of black silicon texturing to further improve high performance devices, though this will likely have less of an impact on multi-crystalline silicon cells where bulk recombination dominates.The suppression of recombination losses at surface defects by gallium oxide (Ga2O3), an alternative to aluminium oxide (Al2O3), is also investigated. It is demonstrated that, as in Al2O3, thin films of amorphous Ga2O3 can passivate surface defects through a direct reduction of recombination active defects and via the establishment of a high negative charge density. Further investigations demonstrate that Ga2O3 is applicable to random pyramid surfaces textures, and is compatible with plasma enhanced chemical vapour deposited silicon nitride (SiNx) capping for anti-reflection purposes. Indeed, the Ga2O3 / SiNx stack is shown to result in enhanced thermal stability and surface passivation properties comparable to state-of-the-art Al2O3 films. In addition, it is also shown that Ga2O3 can act as a Ga source in a laser doping process, as demonstrated by a proof-of-concept p-type laser doped partial rear contact solar cell with an efficiency of 19.2%. Finally, the resistive losses associated with metal / silicon contacts are addressed. It is demonstrated that a significant asymmetry in the work function of the electron and hole contact materials is sufficient to induce carrier selectivity without the need for heavy doping. This had recently been demonstrated for hole contacts with the high work function material molybdenum oxide. In this thesis specific attention is given to finding a suitable low work function material for the electron contact. Calcium, a common low work function electrode in organic electronic devices, is shown to act as a low resistance Ohmic contact to crystalline silicon without the need for heavy doping. Fabrication of n-type solar cells with partial rear calcium contacts resulted in a device efficiency of 20.3%, limited largely by recombination at the Ca / Si interface. This limitation to device efficiency is shown to be partially alleviated by the application of a passivating titania (TiOx) interlayer into the cell structure, resulting in an increase in device efficiency to 21.8% -- the highest reported efficiency for a TiOx-based heterojunction solar cell to date.
Masters Theses in the Pure and Applied Sciences
Author: Wade H. ShaferPublisher: Springer Science & Business Media
ISBN: 1461573912
Category : Science
Languages : en
Pages : 386
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thougtit that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 31 (thesis year 1986) a total of 11 ,480 theses titles trom 24 Canadian and 182 United States universities. We are sure that this broader base tor these titles reported will greatly enhance the value ot this important annual reterence work. While Volume 31 reports theses submitted in 1986, on occasion, certain univer sities do re port theses submitted in previousyears but not reported at the time.
Thin Films and Heterostructures for Oxide Electronics
Author: Satishchandra B. OgalePublisher: Springer Science & Business Media
ISBN: 0387260897
Category : Technology & Engineering
Languages : en
Pages : 416
Book Description
Oxides form a broad subject area of research and technology development which encompasses different disciplines such as materials science, solid state chemistry, physics etc. The aim of this book is to demonstrate the interplay of these fields and to provide an introduction to the techniques and methodologies involving film growth, characterization and device processing. The literature in this field is thus fairly scattered in different research journals covering one or the other aspect of the specific activity. This situation calls for a book that will consolidate this information and thus enable a beginner as well as an expert to get an overall perspective of the field, its foundations, and its projected progress.
Recent Advances in Thin Films
Author: Sushil KumarPublisher: Springer Nature
ISBN: 9811561168
Category : Technology & Engineering
Languages : en
Pages : 721
Book Description
This volume comprises the expert contributions from the invited speakers at the 17th International Conference on Thin Films (ICTF 2017), held at CSIR-NPL, New Delhi, India. Thin film research has become increasingly important over the last few decades owing to the applications in latest technologies and devices. The book focuses on current advances in thin film deposition processes and characterization including thin film measurements. The chapters cover different types of thin films like metal, dielectric, organic and inorganic, and their diverse applications across transistors, resistors, capacitors, memory elements for computers, optical filters and mirrors, sensors, solar cells, LED's, transparent conducting coatings for liquid crystal display, printed circuit board, and automobile headlamp covers. This book can be a useful reference for students, researchers as well as industry professionals by providing an up-to-date knowledge on thin films and coatings.
Springer Handbook of Electronic and Photonic Materials
Author: Safa KasapPublisher: Springer
ISBN: 331948933X
Category : Technology & Engineering
Languages : en
Pages : 1536
Book Description
The second, updated edition of this essential reference book provides a wealth of detail on a wide range of electronic and photonic materials, starting from fundamentals and building up to advanced topics and applications. Its extensive coverage, with clear illustrations and applications, carefully selected chapter sequencing and logical flow, makes it very different from other electronic materials handbooks. It has been written by professionals in the field and instructors who teach the subject at a university or in corporate laboratories. The Springer Handbook of Electronic and Photonic Materials, second edition, includes practical applications used as examples, details of experimental techniques, useful tables that summarize equations, and, most importantly, properties of various materials, as well as an extensive glossary. Along with significant updates to the content and the references, the second edition includes a number of new chapters such as those covering novel materials and selected applications. This handbook is a valuable resource for graduate students, researchers and practicing professionals working in the area of electronic, optoelectronic and photonic materials.
NBS Special Publication
Author: Publisher:
ISBN:
Category : Weights and measures
Languages : en
Pages : 684
Book Description
Scientific and Technical Aerospace Reports
Author: Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 652
Book Description
Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.