Investigation of CuInSe2 Thin Films and CuInSe2 Nanowire Arrays Prepared by Using Electrodeposition Technology for Solar Cell Applications PDF Download

Author: 洪品[kun]
Publisher:
ISBN:
Category :
Languages : en
Pages : 146

View

Book Description

Author: Subba Ramaiah Kodigala
Publisher: Academic Press
ISBN: 0080920322
Category : Science
Languages : en
Pages : 700

View

Book Description
Cu(In1-xGax)Se2 Based Thin Film Solar Cells provides valuable contents about the fabrication and characterization of chalcopyrite Cu(In1-xGax)Se2 based thin film solar cells and modules. The growth of chalcopyrite Cu(In1-xGax)(S1-ySey)2 absorbers, buffers, window layers, antireflection coatings, and finally metallic grids, which are the sole components of solar cells, is clearly illustrated. The absorber, which contains multiple elements, segregates secondary phases if the growth conditions are not well optimized i.e., the main drawback in the fabrication of solar cells. More importantly the solutions for the growth of thin films are given in detail. The properties of all the individual layers and single crystals including solar cells analyzed by different characterization techniques such as SEM, AFM, XPS, AES, TEM, XRD, optical, photoluminescence, and Raman spectroscopy are explicitly demonstrated. The electrical analyses such as conductivities, Hall mobilities, deep level transient spectroscopy measurements etc., provide a broad picture to understand thin films or single crystals and their solar cells. The book clearly explains the working principle of energy conversion from solar to electrical with basic sciences for the chalcopyrite based thin film solar cells. Also, it demonstrates important criteria on how to enhance efficiency of the solar cells and modules. The effect of environmental factors such as temperature, humidity, aging etc., on the devices is mentioned by citing several examples. Illustrates a number of growth techniques to prepare thin film layers for solar cells Discusses characterization techniques such as XRD, TEM, XPS, AFM, SEM, PL, CL, Optical measurements, and Electrical measurements Includes I-V, C-V measurements illustrations Provides analysis of solar cell efficiency Presents current trends in thin film solar cells research and marketing

Author: Paresh S. Nasikkar
Publisher:
ISBN:
Category :
Languages : en
Pages :

View

Book Description
The aim of the work presented in this thesis was to develop CuInSe2 (CIS) and CuIni_?Al?Se2 (CIAS) thin films for application in photovoltaic (PV) solar cells. The purpose of the addition of aluminium (Al) in CIS thin films was to modify the energy band gap of the thin films to be nearer to the optimum for PV energy conversion and to replace the less abundant element, gallium (Ga) in CuIni_, Ga, Se2 (CIGS) solar cells. This also makes possible the production of tandem solar cells using CIAS to make the wide energy band gap top cell and the CIS to make the narrow energy band gap lower cell. The use of very thin CIS and CIAS absorber layers in solar cell structures was also investigated; the aim was to reduce the amount of indium (In) in cell production. The CIS and CIAS absorber films were prepared by a sequential two step method in which Cu-In and Cu-In-Al precursor layers were magnetron sputter deposited onto Mo-coated soda lime glass (SLG) substrates; the CIS or CIAS was then formed by heating in a selenium (Se) containing environment. Thin film solar cells were developed in the substrate configuration and had the structure Ni-Al/Indium tin oxide (ITO)/i-ZnO/CdS/CIAS/Mo/SLG. In order to achieve high efficiency solar cells it is an important to optimse the back contact molybdenum (Mo) layer, the absorber layer, the CdS buffer layer, the window layer and top contact layers. The work described in this thesis focused on the optimisation of the back contact and absorber layers. The thin films were characterised mainly using X-ray diffraction (XRD), energy dispersive X-ray analysis (EDS), scanning electron microscopy (SEM), secondary ion mass spectroscopy (MiniSIMS), atomic force microscopy (AFM) and using spectroscopy measurements to investigate the effect of processing conditions on the composition, crystal structure, surface morphology and the optical properties of the films. The solar cells were characterised by current-voltage (/- V) and incident photon-to-photocurrent conversion efficiency (IPCE) measurements. Both Mo single and bilayer structures were investigated. It was found that single layers had better properties than Mo bilayers. The optimisation of the Mo deposition sputtering process yielded Mo layers which had good adherence and were conformal to the glass substrates, had low resistivity (29 if .cm), were pin hole free and had good crystallinity. The influence of Cu-In precursor layers with thicknesses in the range 90-400 nm on the microstructure of the CIS thin films (thicknesses in the range 400-1600 nm) was investigated. Solar cells fabricated from the CIS films of thicknesses 500 nm and 900 nm yielded highest cell conversion efficiencies of 4.3% and 8.2%, respectively. The selenisation of the magnetron sputter deposited Cu-In-Al precursor layers was carried out at a temperature of 550?C. Films were poor in surface quality and adhesion. Films prepared from the precursor layer with n [(Al/(Al+In))] = 0.21 had a non-uniform Al depth profile towards the bottom of the film. Although the film was found to be photoactive its effective energy band gap was 0.98 eV suggesting the properties of CIS. This confirmed incomplete mixing of Al in the thin films which was considered to be segregated at the bottom of the film. The thinner layers of Cu-In-Al precursors with thicknesses in the range 0.55?1.00 gm and n [(Al/Al+In)] in the range 0.28-0.54 were magnetron sputter deposited. The precursor layers showed the prominent binary A1Cu4 compound with a uniform distribution of Al in the layer. Thin films converted from these precursor layers of thicknesses in the range 1.3-2.0 pm were fairly uniform in surface structure. Films with x 0.2 were found to have an energy bandgap of 1.10 eV and were also photoactive. Solar cells fabricated from this absorber film yielded a highest cell efficiency of 4.9%. Environmental impact assessments have been made on materials and the processes used in the fabrication of CIS and CIAS and solar cells. It was found that there is no critical environmental impact of materials and associated processes involved in the fabrication of CIS and CIAS thin film solar cells.

Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 12

View

Book Description
This report describes research into electrical contacts for copper indium diselenide (CuInSe2) polycrystalline thin films used for solar cell applications. Molybdenum contacts have historically been the most promising for heterojunction solar cells. This program studied contact stability by investigating thermally induced bilayer reactions between molybdenum and copper, indium, and selenium. Because selenization is widely used to fabricate CuInSe2 thin films for photovoltaic cells, a second part of the program investigated how the morphologies, phases, and reactions of pre-selenization Cu-In structures are affected by the deposition process and heat treatments. 7 refs., 6 figs.

Author: Julia Kois
Publisher:
ISBN: 9789985596722
Category :
Languages : en
Pages : 123

View

Book Description

Author: Huei-Hsin Chen
Publisher:
ISBN:
Category : Copper indium selenide
Languages : en
Pages :

View

Book Description

Author: Rémi Aninat
Publisher:
ISBN:
Category :
Languages : en
Pages :

View

Book Description
Cu-In, Cu-Al and Cu-In-Al metallic precursor layers were deposited using radio-frequency magnetron sputtering and selenised to produce thin films of CuInSe2 (CIS), CuAlSe2 (CAS) and CuIn1-xAlxSe2 (CIAS), respectively. The selenisation stage of this 2-stage process was carried out in a tube furnace (TF) or a rapid thermal processor (RTP) in the presence of elemental Se, either deposited on top of the precursor film or provided from an external source in the chamber, in order to fabricate the chalcopyrite material. The aim was to produce single phase, device quality CIS, CAS and CIAS for use as an absorber layer material in thin film photovoltaic solar cells. Profilometry performed on the as-deposited Cu-In-Al metallic precursors showed an important increase in surface roughness compared to the Cu-In and Cu-Al precursors. This was found to be due to the preferential formation of Cu9(In,Al)4, which stoichiometry led the excess In to form island-shaped In phases at the surface of the bulk, while only Cu2In and CuIn2 formed in Cu-In precursors. Regarding the selenisation, temperatures ranging from 250°C to 550°C were used, and the resulting samples were investigated using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), secondary ion mass spectroscopy (SIMS) and glow-discharge optical emission spectroscopy (GD-OES). Thin films of single phase CIS and CAS were successfully produced with energy band gaps of 0.99 eV and 2.68 eV, respectively. However the incorporation of Al proved to be difficult. The results showed that no incorporation of the Al into the chalcopyrite lattice was achieved in the samples selenised in the RTP, which was believed to be due to the oxidation of the element Al into amorphous Al2O3. In the tube furnace, possibly due to lower levels of oxidation, incorporation occurred more readily but Al and In segregated towards the back and front of the layer, respectively. The causes of the segregation were studied and solutions to avoid it developed, resulting under certain conditions in successful production of CuIn1-xAlxSe2. Samples were tested in a photoelectrochemical cell and showed (apparent) external quantum efficiency values comparable to a CuInSe2 (CIS) sample used as a standard.

Author: Sreekanth Mandati
Publisher:
ISBN:
Category : Technology
Languages : en
Pages :

View

Book Description
CuInSe2 (CIS) and Cu(In,Ga)Se2 (CIGS) semiconductors are the most studied absorber materials for thin films solar cells due to their direct bandgap and large absorption coefficient. The highly efficient CIGS devices are often fabricated using expensive vacuum based technologies; however, recently electrodeposition has been demonstrated to produce CIGS devices with high efficiencies and it is easily amenable for large area films of high quality with effective material use and high deposition rate. In this context, this chapter discusses the recent developments in CIS and CIGS technologies using electrodeposition. In addition, the fundamental features of electrodeposition such as direct current, pulse and pulse-reverse plating and their application in the fabrication of CIS and CIGS films are discussed. In conclusion, the chapter summarizes the utilization of pulse electrodeposition for fabrication of CIS and CIGS films while making a recommendation for exploring the group's unique pulse electroplating method.

Author: Zhenhao Zhang
Publisher: KIT Scientific Publishing
ISBN: 386644978X
Category : Science
Languages : en
Pages : 190

View

Book Description
The distribution of the electrostatic potential in and between the materials in Cu(In,Ga)Se2 thin-film solar cells has a major impact on their superior performance. This thesis reported on the nanoscale imaging of the electrostatic potential on untreated cross sections of operating Cu(In,Ga)Se2 solar cells using Kelvin probe force microscopy.

Author: Angela Piegari
Publisher: Elsevier
ISBN: 0857097318
Category : Technology & Engineering
Languages : en
Pages : 869

View

Book Description
Optical coatings, including mirrors, anti-reflection coatings, beam splitters, and filters, are an integral part of most modern optical systems. Optical thin films and coatings provides an overview of thin film materials, the properties, design and manufacture of optical coatings and their use across a variety of application areas. Part one explores the design and manufacture of optical coatings. Part two highlights unconventional features of optical thin films including scattering properties of random structures in thin films, optical properties of thin film materials at short wavelengths, thermal properties and colour effects. Part three focusses on novel materials for optical thin films and coatings and includes chapters on organic optical coatings, surface multiplasmonics and optical thin films containing quantum dots. Finally, applications of optical coatings, including laser components, solar cells, displays and lighting, and architectural and automotive glass, are reviewed in part four. Optical thin films and coatings is a technical resource for researchers and engineers working with optical thin films and coatings, professionals in the security, automotive, space and other industries requiring an understanding of these topics, and academics interested in the field. An overview of the materials, properties, design and manufacture of thin films Special attention is given to the unconventional features and novel materials of optical thin films Reviews applications of optical coatings including laser components, solar cells, glasing, displays and lighting