Investigation of Conditions for Moisture Damage in Asphalt Concrete and Appropriate Laboratory Test Methods PDF Download

Author: Qing Lü
Publisher:
ISBN:
Category : Asphalt concrete
Languages : en
Pages : 900

View

Book Description

Author: Qing Lü
Publisher:
ISBN:
Category : Asphalt concrete
Languages : en
Pages : 30

View

Book Description

Author: Russell G. Hicks
Publisher: Transportation Research Board
ISBN: 9780309049245
Category : Technology & Engineering
Languages : en
Pages : 104

View

Book Description
This synthesis will be of interest to pavement designers, construction engineers, maintenance engineers, and others interested in avoiding or limiting moisture damage in asphalt concrete. Information is provided on physical and chemical explanations for moisture damage in asphalt concrete, along with a discussion of current practices and test methods for determining or reducing the susceptibility of various asphalt concrete components and mixtures to such damage. Moisture damage in asphalt concrete is a nationwide problem which often necessitates premature replacement of highway pavement surfaces. This report of the Transportation Research Board describes the underlying physical and chemical phenomena responsible for such damage. Current test methods used to determine the susceptibility of asphalt concretes, or their constituents, to moisture damage are described and evaluated. Additionally, current practices for minimizing the potential for moisture damage are examined.

Author: Jason Bausano
Publisher:
ISBN:
Category : Pavements, Asphalt
Languages : en
Pages : 0

View

Book Description
It has been extensively documented since the late 1970's that moisture damage occurs in hot mix asphalt (HMA) pavements. A variety of test methods are available that test an HMA's ability to resist moisture sensitivity. There are also some test methods that look at an asphalt binder's moisture susceptibility. The current test method for detecting moisture sensitivity in HMA is American Association of State Highway and Transportation Officials (AASHTO) T283: Resistance of Compacted Bituminous Mixture to Moisture-Induced Damage. Inclusion of this test method in Superpave did not consider the change in specimen size from 100mm to 150mm nor difference in compaction method. The procedures in AASHTO T283 consider the loss of strength due to freeze/thaw cycling and the effects of moisture existing in specimens compared to unconditional specimens. However, mixtures do not experience such a pure phenomenon. Pavements undergo cycling of environmental conditions, but when moisture is present, there is repeated hydraulic loading with the development of pore pressure in mixtures. Thus, AASHTO T283 does not consider the effect of pore pressure, but rather considers a single load effect on environmentally conditioned specimens. This report develops moisture susceptibility procedures which would utilize repeated loading test devices (dynamic modulus or asphalt pavement analyzer) of specimens in saturated conditions and be compared to unconditioned specimens in a dry test environment. In addition to HMA mixture testing, a modified dynamic shear rheometer will be used to determine if an asphalt binder or mastic is moisture susceptible. Moisture susceptible criteria was developed using the dynamic complex modulus, asphalt pavement analyzer, and dynamic shear rheometer. Evaluation of AASHTO T283 for 150mm Superpave Gyrtaory compacted specimens is also detailed in this report along with a new criterion.

Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 192

View

Book Description

Author: Mansour Solaimanian
Publisher: Transportation Research Board National Research
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 84

View

Book Description
Explores whether combining the environmental conditioning system with the simple performance test would provide a superior procedure for determining the moisture susceptibility of hot-mix asphalt (HMA).

Author: Junyan Yi
Publisher:
ISBN:
Category : Aging
Languages : en
Pages : 12

View

Book Description
Moisture damage is one of the major causes of premature failure in asphalt pavements, and it also accelerates the severity of other distresses. To date, no moisture test has been widely accepted that is reliable and practical in predicting the field moisture performance of the asphalt mix during the design stage. One reason is because the sample conditioning methods cannot represent the field conditions, resulting in inconsistent results with the field performance of some mixtures. Taken into account this concern, this paper investigates how different testing conditions, including sample preparation, moisture saturation, and loading methods, can affect the results of laboratory moisture tests. In conclusion, it is found that the degree of vacuum pressure for achieving moisture saturation and air voids distribution has a significant impact on the moisture testing results. Multiple freeze-thaw cycles have a limited effect on the variation of mechanical performance (i.e., compressive dynamic modulus). If one or several freeze-thaw cycles are to be used in a moisture test, the effect of aging should be considered. It is recommended that a sample without coring and cutting should be used for a moisture test as the coring and cutting process is found to change the air voids distribution, i.e., the percent of connected air voids, thus making the sample not representative to the field condition. Finally, the moisture test results are more sensitive under tension mode than under compression mode.

Author: Philippe Coussot
Publisher: John Wiley & Sons
ISBN: 0471720569
Category : Technology & Engineering
Languages : en
Pages : 311

View

Book Description
A comprehensive examination of rheometry theory and its practical applications This publication enables readers to understand and characterize the flow properties of complex fluids and, with this knowledge, develop a wide range of industrial and consumer products. The author fills a gap in the current literature by presenting a comprehensive description of the rheological behavior of pastes, suspensions, and granular materials and by offering readers the rheometrical techniques needed to effectively characterize these materials. With his extensive experience in both academic and industrial research, the author is able to take the field to a new level in: * General schematic classification of the behavior of pastes,suspensions, and granular materials * Systematic review, analysis, and quantification of experimental problems with complex fluids * Insight into the flow behavior of complex fluids gained through the most recent discoveries and research techniques * Comprehensive rheometrical analysis of data obtained from research across a broad range of industries In addition to gaining a thorough understanding of the theory underlining rheometry, readers discover its many practical applications. Throughout the publication, specific examples are provided that illustrate how theory is applied, including examples involving food, civil engineering, cosmetics, pharmaceuticals, paper coatings, paint and ink, ceramics, sewage sludges, granular materials, and natural materials. In summary, this publication provides a comprehensive review of the behavior of pastes, suspensions, and granular materials as well as detailed analysis of rheometrical techniques. Everything needed to determine the behavior and movement of complex fluids is provided. It is, therefore, a recommended resource for rheologists, engineers, and researchers, as well as students who deal with complex fluids in product formulation, quality and process control, and process plant design.

Author: Zahid Hossain
Publisher: Springer
ISBN: 3319957929
Category : Science
Languages : en
Pages : 197

View

Book Description
This book presents challenges in transportation engineering, recent developments and advancements in technologies, and design and construction using sustainable materials. The articles presented in this volume focus on fundamental investigations on various aspects of civil engineering materials and structures. The scope of this volume is the application of findings for solving problems in geotechnical, pavement, and transportation engineering using emerging techniques. Papers were selected from the 5th GeoChina International Conference 2018 on Civil Infrastructures Confronting Severe Weathers and Climate Changes Conference, held on July 23 to 25, 2018 in HangZhou, China.

Author: Bradley J. Bruce
Publisher:
ISBN:
Category : Pavements, Asphalt
Languages : en
Pages : 0

View

Book Description
The actual moisture susceptibility of 10 bituminous mixtures placed in the field was compared to the moisture susceptibility that was predicted during the laboratory evaluation of the same mix design. Laboratory mixtures were evaluated using the modified Lottman procedure and the Root-Tunnicliff procedure, in addition to routine moisture susceptibility testing which includes immersion compression testing. After two years, cores were taken from the field projects. The condition of the cores and their present susceptibility to moisture damage were determined by performing modified Lottman and Root-Tunnicliff testing. A feature of the evaluation process was the use of the ACMODAS program to predict the remaining service life of the plant mix cores.