Investigation of Bonding Between Metals and Ceramics PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Investigation of Bonding Between Metals and Ceramics PDF full book. Access full book title Investigation of Bonding Between Metals and Ceramics by H. J. Hamjian. Download full books in PDF and EPUB format.
Author: H. J. Hamjian Publisher: ISBN: Category : Boron compounds Languages : en Pages : 30
Book Description
The experiments conducted with boron carbide and each of four metals showed that nickel, cobalt, and iron formed a bonding zone between the metal and the ceramic and that chromium showed satisfactory physical wetting characteristics on the ceramic.
Author: H. J. Hamjian Publisher: ISBN: Category : Boron compounds Languages : en Pages : 30
Book Description
The experiments conducted with boron carbide and each of four metals showed that nickel, cobalt, and iron formed a bonding zone between the metal and the ceramic and that chromium showed satisfactory physical wetting characteristics on the ceramic.
Author: H. J. Hamjian Publisher: ISBN: Category : Boron compounds Languages : en Pages : 696
Book Description
The experiments conducted with boron carbide and each of four metals showed that nickel, cobalt, and iron formed a bonding zone between the metal and the ceramic and that chromium showed satisfactory physical wetting characteristics on the ceramic.
Author: HUEL H CHANDLER (JR.) Publisher: ISBN: Category : Languages : en Pages : 43
Book Description
Ceramic-to-metal bonding and ceramic adhesives for metals were studied. Successful ceramic-to-metal attachments were made by use of brazing alloys and by mechanical means. The attachment of metal-to-metal with ceramic adhesives was also attained. Small specimens of ceramics and metals were bonded and brazed together. The strength of these bonds was tested at room temperature, 1200 and 1500 F. Some of the brazed specimens exhibited a room temperature tensile strength of 11,000 psi and 5,000 psi when tested at a temperature of 1500 F. The majority of fractures at all temperatures on the brazed ceramic-tometal test specimens occurred at the ceramicmetallized interface or within the ceramic itself. Several ceramic adhesives were employed in efforts to bond various combinations of alumina, pyroceram, Rene'41, Kovar A metal, RS-140 Ti, and 17-7 PH stainless steel. These specimens were tested at room temperature, 600, 800, and 1000 F. 17-7 PH stainless steel bonded with UI-1067-1A ceramic adhesive resulted in a shear strength of 1900 psi when tested at either room temperature or 1000 F.
Author: Robert Edward Monroe Publisher: ISBN: Category : Adhesives Languages : en Pages : 86
Book Description
This report supplies information on joining processes applicable to titanium and its alloys in sheet metal applications, primarily related directly to airframe construction. Although the material presented here does not cover all titanium joining processes, and omits such processes as plasma-arc, submerged-arc, electroslag, flash, and high-frequency resistance welding, the data presented cover materials up to 2-inches thick in some cases and the report should be useful to anyone seeking titanium joining information. The joining processes covered fall into five categories: welding, brazing, metallurgical bonding (diffusion and deformation bonding), adhesive bonding, and mechanical fastening. The fusion welding processes that are discussed in detail include gas tungsten arc, gas metal arc, arc spot, and electron beam. The resistance processes give extended coverage are spot, roll spot, and seam welding. (Author).
Author: H. J. Hamjian
Author: H. J. Hamjian
Author: H. J. Hamjian
Author: Claës I. Helgesson
Author: Claës I. Helgesson
Author: Claës Ivar Helgesson
Author: Victor Curicuta
Author: David Mitchell Waters
Author: HUEL H CHANDLER (JR.)
Author: F. H. Norton
Author: Robert Edward Monroe