Author: Thomas L. Fischetti
Publisher:
ISBN:
Category : Aerodynamic load
Languages : en
Pages : 98
Book Description
Pressure distributions have been obtained in the Langley 8-foot transonic tunnels over a Mach number range from 0.80 to 1.125 and at a Mach number of 1.43 for a 45 degree sweptback cambered wing having a thickened root, an aspect ratio of 4.0, and a taper ratio of 0.15. Data were obtained for the wing in the presence of a basic Sears-Haack body and a body indented symmetrically for a Mach number of 1.2.
Investigation at Mach Numbers from 0.80 to 1.43 of Pressure and Load Distributions Over a Thin 45© Sweptback Highly Tapered Wing in Combination with Basic and Indented Bodies
Author: Thomas L. Fischetti
Publisher:
ISBN:
Category : Aerodynamic load
Languages : en
Pages : 98
Book Description
Pressure distributions have been obtained in the Langley 8-foot transonic tunnels over a Mach number range from 0.80 to 1.125 and at a Mach number of 1.43 for a 45 degree sweptback cambered wing having a thickened root, an aspect ratio of 4.0, and a taper ratio of 0.15. Data were obtained for the wing in the presence of a basic Sears-Haack body and a body indented symmetrically for a Mach number of 1.2.
Publisher:
ISBN:
Category : Aerodynamic load
Languages : en
Pages : 98
Book Description
Pressure distributions have been obtained in the Langley 8-foot transonic tunnels over a Mach number range from 0.80 to 1.125 and at a Mach number of 1.43 for a 45 degree sweptback cambered wing having a thickened root, an aspect ratio of 4.0, and a taper ratio of 0.15. Data were obtained for the wing in the presence of a basic Sears-Haack body and a body indented symmetrically for a Mach number of 1.2.
Aerodynamic Characteristics of a Spoiler-slot-deflector Control on a 45© Sweptback Wing at Mach Numbers of 1.61 and 2.01
Author: Douglas R. Lord
Publisher:
ISBN:
Category : Aerodynamics
Languages : en
Pages : 52
Book Description
An investigation has been made in the Langley 4- by 4-foot supersonic pressure tunnel at Mach numbers of 1.61 and 2.01 to determine the aerodynamic characteristics of a spoiler-slot-deflector control on a 45 degree sweptback wing having an aspect ratio of 3.5, a taper ratio of 0.3, and an NACA 65A005 airfoil section. The model was equipped with a 15-percent-chord spoiler-slot-deflector extending from 13 o 78 percent of the wing semispan. The spoiler and deflector were hinged along the 60- and 75-percent-chord lines, respectively. Tests were made at a Reynolds number of 3,000,000 (based on the mean aerodynamic chord of the wing) and covered ranges of angles of attack from -3 to 15 degrees, spoiler projections from 0 to 8.0 percent chord, and deflector projections from 0 to 7.6 percent chord.
Publisher:
ISBN:
Category : Aerodynamics
Languages : en
Pages : 52
Book Description
An investigation has been made in the Langley 4- by 4-foot supersonic pressure tunnel at Mach numbers of 1.61 and 2.01 to determine the aerodynamic characteristics of a spoiler-slot-deflector control on a 45 degree sweptback wing having an aspect ratio of 3.5, a taper ratio of 0.3, and an NACA 65A005 airfoil section. The model was equipped with a 15-percent-chord spoiler-slot-deflector extending from 13 o 78 percent of the wing semispan. The spoiler and deflector were hinged along the 60- and 75-percent-chord lines, respectively. Tests were made at a Reynolds number of 3,000,000 (based on the mean aerodynamic chord of the wing) and covered ranges of angles of attack from -3 to 15 degrees, spoiler projections from 0 to 8.0 percent chord, and deflector projections from 0 to 7.6 percent chord.
Investigation at Transonic Speeds of the Loading Over a 45 Degree Sweptback Wing Having an Aspect Ratio of 3, a Taper Ratio of 0.2, and NACA 65A004 Airfoil Sections
Author: Jack F. Runckel
Publisher:
ISBN:
Category : Aerodynamic load
Languages : en
Pages : 104
Book Description
An investigation at transonic speeds of the loading over a 45 degree sweptback wing having an aspect ratio of 3, a taper ratio of 0.2, and NACA 65A004 airfoil sections has been conducted in the Langley16-foot transonic tunnel. Pressure measurements on the wing-body combination were obtained at angles of attack from 0 to 26 degrees at Mach numbers from 0.80 to 0.98 and from 0 to about 12 degrees at Mach numbers from 1.00 to 1.05. Reynolds number, based on the wing mean aerodynamic chord, varied from 7,000,000 to 8,500,000 over the test Mach number range.
Publisher:
ISBN:
Category : Aerodynamic load
Languages : en
Pages : 104
Book Description
An investigation at transonic speeds of the loading over a 45 degree sweptback wing having an aspect ratio of 3, a taper ratio of 0.2, and NACA 65A004 airfoil sections has been conducted in the Langley16-foot transonic tunnel. Pressure measurements on the wing-body combination were obtained at angles of attack from 0 to 26 degrees at Mach numbers from 0.80 to 0.98 and from 0 to about 12 degrees at Mach numbers from 1.00 to 1.05. Reynolds number, based on the wing mean aerodynamic chord, varied from 7,000,000 to 8,500,000 over the test Mach number range.
Investigation at Transonic Speeds of the Loading Over a 45 Degree Sweptback Wing Having an Aspect Ratio of 3, a Taper Ratio of 0.2, and Naca 65a004 Airfoil Sections
Author: JACK F. RUNCKEL
Publisher:
ISBN:
Category :
Languages : en
Pages : 1
Book Description
An investigation at transonic speeds of the loading over a 45 degree sweptback wing having an aspect ratio of 3, a taper ratio of 0.2, and NACA 65A004 airfoil sections was conducted in the Langley 16-foot transonic tunnel. Pressure measurements on the wing-body combi ation were obtained at angles of attack from 0 degrees to 26 degrees at Mach numbers from 0.80 to 0.98 and at angles of attack from 0 degrees to about 12 degrees at Mach numbers from 1.00 to 1.05. Reynolds number, based on the wing mean aerodynamic c ord varied from 7 times 10 to the 6th po er to 8.5 times 10 to the 6th power over the test Mach number range. Results of the investigation indicate that a highly swept shock originates at the juncture of the wing leading edge and the body at moderate angles of attack and has a large influence on the loading over the inboard wing sections. (Author).
Publisher:
ISBN:
Category :
Languages : en
Pages : 1
Book Description
An investigation at transonic speeds of the loading over a 45 degree sweptback wing having an aspect ratio of 3, a taper ratio of 0.2, and NACA 65A004 airfoil sections was conducted in the Langley 16-foot transonic tunnel. Pressure measurements on the wing-body combi ation were obtained at angles of attack from 0 degrees to 26 degrees at Mach numbers from 0.80 to 0.98 and at angles of attack from 0 degrees to about 12 degrees at Mach numbers from 1.00 to 1.05. Reynolds number, based on the wing mean aerodynamic c ord varied from 7 times 10 to the 6th po er to 8.5 times 10 to the 6th power over the test Mach number range. Results of the investigation indicate that a highly swept shock originates at the juncture of the wing leading edge and the body at moderate angles of attack and has a large influence on the loading over the inboard wing sections. (Author).
Investigation at Transonic Speeds of Loading Over a 30 Deg Sweptback Wing of Aspect Ratio 3, Taper Ratio 0.2, and NACA 65A004 Airfoil Section Mounted on a Body
Author: Donald D. Arabian
Publisher:
ISBN:
Category : Aerodynamics, Transonic
Languages : en
Pages : 88
Book Description
The aerodynamic load characteristics of a wing-body combination were determined experimentally at Mach numbers from 0.80 to 1.03 for angles of attack up to 26 degrees. Two wings, both with 30 degrees sweep of the quarter-chord line, taper ratio of 0.2, aspect ratio of 3, and thickness of 4 percent chord, but of different types of construction, were tested. One wing was of solid steel and the other was of plastic with an inner steel core ...
Publisher:
ISBN:
Category : Aerodynamics, Transonic
Languages : en
Pages : 88
Book Description
The aerodynamic load characteristics of a wing-body combination were determined experimentally at Mach numbers from 0.80 to 1.03 for angles of attack up to 26 degrees. Two wings, both with 30 degrees sweep of the quarter-chord line, taper ratio of 0.2, aspect ratio of 3, and thickness of 4 percent chord, but of different types of construction, were tested. One wing was of solid steel and the other was of plastic with an inner steel core ...
An Investigation at Transonic Speeds of the Effects of Thickness Ratio and of Thickened Root Sections on the Aerodynamic Characteristics of Wings with 47© Sweepback, Aspect Ratio 3.5, and Taper Ratio 0.2 in the Slotted Test Section of the Langley 8-foot High-speed Tunnel
Author: Ralph P. Bielat
Publisher:
ISBN:
Category : Aerodynamics, Transonic
Languages : en
Pages : 44
Book Description
Four wing-body combinations of the same plan form (47 degree sweep, 3.5 aspect ratio, and 0.2 taper ratio) were compared at transonic speeds in the Langley 8-foot high-speed tunnel. Three wings were 4, 6, and 9 percent thick; the fourth was 6 percent thick but, on the inner 0.4 span, tapered to 12-percent thickness at the roots.
Publisher:
ISBN:
Category : Aerodynamics, Transonic
Languages : en
Pages : 44
Book Description
Four wing-body combinations of the same plan form (47 degree sweep, 3.5 aspect ratio, and 0.2 taper ratio) were compared at transonic speeds in the Langley 8-foot high-speed tunnel. Three wings were 4, 6, and 9 percent thick; the fourth was 6 percent thick but, on the inner 0.4 span, tapered to 12-percent thickness at the roots.
An Evaluation of Proposed Reference Fuel Scales for Knock Rating
Author: Henry C. Barnett
Publisher:
ISBN:
Category : Fuel
Languages : en
Pages : 62
Book Description
This paper presents the results showing the antiknock performance characteristics of proposed reference fuels (triptane, n-heptane, isooctane) in current fuel knock-rating engines. The proposed reference-fuel scales are compared with the octane-number scale and the performance-number scale now in use.
Publisher:
ISBN:
Category : Fuel
Languages : en
Pages : 62
Book Description
This paper presents the results showing the antiknock performance characteristics of proposed reference fuels (triptane, n-heptane, isooctane) in current fuel knock-rating engines. The proposed reference-fuel scales are compared with the octane-number scale and the performance-number scale now in use.
Attempts to Defoam Existing Oils by Processing
Author: J. W. McBain
Publisher:
ISBN:
Category : Charcoal
Languages : en
Pages : 32
Book Description
Lubricating oil has been processed by treatment with various adsorbaents and by solvent extraction in an attempt to reduce foaming.
Publisher:
ISBN:
Category : Charcoal
Languages : en
Pages : 32
Book Description
Lubricating oil has been processed by treatment with various adsorbaents and by solvent extraction in an attempt to reduce foaming.
Surface Properties of Oils
Author: J. W. McBain
Publisher:
ISBN:
Category : Lubrication and lubricants
Languages : en
Pages : 24
Book Description
The surface properties of oils were studied in a short series of experiments on their film viscosities and surface tensions. Information about film formation in general was obtained from the behavior of single bubbles on the surface and from the coalesence of pairs of bubbles below the surface of various pure and binary liquids.
Publisher:
ISBN:
Category : Lubrication and lubricants
Languages : en
Pages : 24
Book Description
The surface properties of oils were studied in a short series of experiments on their film viscosities and surface tensions. Information about film formation in general was obtained from the behavior of single bubbles on the surface and from the coalesence of pairs of bubbles below the surface of various pure and binary liquids.
NASA Technical Translation
Author: United States. National Aeronautics and Space Administration
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 230
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 230
Book Description