Author: A. T. Olson
Publisher: Prentice Hall
ISBN:
Category : Science
Languages : en
Pages : 280

View

Book Description
Very Good,No Highlights or Markup,all pages are intact.

Author: J. M. Kay
Publisher: Cambridge University Press
ISBN: 9780521205337
Category : Technology & Engineering
Languages : en
Pages : 344

View

Book Description
First published in 1975 as the third edition of a 1957 original, this book presents the fundamental ideas of fluid flow, viscosity, heat conduction, diffusion, the energy and momentum principles, and the method of dimensional analysis. These ideas are subsequently developed in terms of their important practical applications, such as flow in pipes and channels, pumps, compressors and heat exchangers. Later chapters deal with the equation of fluid motion, turbulence and the general equations of forced convection. The final section discusses special problems in process engineering, including compressible flow in pipes, solid particles in fluid flow, flow through packed beds, condensation and evaporation. This book will be of value to anyone with an interest the wider applications of fluid mechanics and heat transfer.

Author: Kuppalapalle Vajravelu
Publisher: Academic Press
ISBN: 0128037857
Category : Mathematics
Languages : en
Pages : 202

View

Book Description
Most of the equations governing the problems related to science and engineering are nonlinear in nature. As a result, they are inherently difficult to solve. Analytical solutions are available only for some special cases. For other cases, one has no easy means but to solve the problem must depend on numerical solutions. Fluid Flow, Heat and Mass Transfer at Bodies of Different Shapes: Numerical Solutions presents the current theoretical developments of boundary layer theory, a branch of transport phenomena. Also, the book addresses the theoretical developments in the area and presents a number of physical problems that have been solved by analytical or numerical method. It is focused particularly on fluid flow problems governed by nonlinear differential equations. The book is intended for researchers in applied mathematics, physics, mechanics and engineering. Addresses basic concepts to understand the theoretical framework for the method Provides examples of nonlinear problems that have been solved through the use of numerical method Focuses on fluid flow problems governed by nonlinear equations

Author: Suhas Patankar
Publisher: Taylor & Francis
ISBN: 1482234211
Category : Science
Languages : en
Pages : 214

View

Book Description
This book focuses on heat and mass transfer, fluid flow, chemical reaction, and other related processes that occur in engineering equipment, the natural environment, and living organisms. Using simple algebra and elementary calculus, the author develops numerical methods for predicting these processes mainly based on physical considerations. Through this approach, readers will develop a deeper understanding of the underlying physical aspects of heat transfer and fluid flow as well as improve their ability to analyze and interpret computed results.

Author: Sid M. Becker
Publisher: Academic Press
ISBN: 0124079008
Category : Science
Languages : en
Pages : 428

View

Book Description
Heat Transfer and Fluid Flow in Biological Processes covers emerging areas in fluid flow and heat transfer relevant to biosystems and medical technology. This book uses an interdisciplinary approach to provide a comprehensive prospective on biofluid mechanics and heat transfer advances and includes reviews of the most recent methods in modeling of flows in biological media, such as CFD. Written by internationally recognized researchers in the field, each chapter provides a strong introductory section that is useful to both readers currently in the field and readers interested in learning more about these areas. Heat Transfer and Fluid Flow in Biological Processes is an indispensable reference for professors, graduate students, professionals, and clinical researchers in the fields of biology, biomedical engineering, chemistry and medicine working on applications of fluid flow, heat transfer, and transport phenomena in biomedical technology. Provides a wide range of biological and clinical applications of fluid flow and heat transfer in biomedical technology Covers topics such as electrokinetic transport, electroporation of cells and tissue dialysis, inert solute transport (insulin), thermal ablation of cancerous tissue, respiratory therapies, and associated medical technologies Reviews the most recent advances in modeling techniques

Author: N.C. Markatos
Publisher: Springer Science & Business Media
ISBN: 3642827810
Category : Technology & Engineering
Languages : en
Pages : 477

View

Book Description
Computational fluid flow is not an easy subject. Not only is the mathematical representation of physico-chemical hydrodynamics complex, but the accurate numerical solution of the resulting equations has challenged many numerate scientists and engineers over the past two decades. The modelling of physical phenomena and testing of new numerical schemes has been aided in the last 10 years or so by a number of basic fluid flow programs (MAC, TEACH, 2-E-FIX, GENMIX, etc). However, in 1981 a program (perhaps more precisely, a software product) called PHOENICS was released that was then (and still remains) arguably, the most powerful computational tool in the whole area of endeavour surrounding fluid dynamics. The aim of PHOENICS is to provide a framework for the modelling of complex processes involving fluid flow, heat transfer and chemical reactions. PHOENICS has now been is use for four years by a wide range of users across the world. It was thus perceived as useful to provide a forum for PHOENICS users to share their experiences in trying to address a wide range of problems. So it was that the First International PHOENICS Users Conference was conceived and planned for September 1985. The location, at the Dartford Campus of Thames Polytechnic, in the event, proved to be an ideal site, encouraging substantial interaction between the participants.

Author: J. M. Kay
Publisher: CUP Archive
ISBN: 9780521316248
Category : Science
Languages : en
Pages : 632

View

Book Description
This textbook deals with the fundamental principles of fluid dynamics, heat and mass transfer. The basic equations governing the convective transfer by fluid motion of matter, energy and momentum, and the transfer of the same properties by diffusion of molecular motion, are presented at the outset. These concepts are then applied systematically to the study of fluid dynamics in an engineering context and to the parallel investigation of heat and mass transfer processes. The influence of viscosity and the dominant role of turbulence in fluid motion are emphasised. Individual chapters are concerned with the important subjects of boundary layers, flow in pipes and ducts, gas dynamics, and flow in turbo-machinery and of a liquid with a free surface. Later chapters cover some of the special types of flow and transfer process encountered in chemical engineering applications, including two-phase flow, condensation, evaporation, flow in packed beds and fluidized solids.

Author: K. S. Raju
Publisher: John Wiley & Sons
ISBN: 0470922923
Category : Technology & Engineering
Languages : en
Pages : 1422

View

Book Description
This broad-based book covers the three major areas of Chemical Engineering. Most of the books in the market involve one of the individual areas, namely, Fluid Mechanics, Heat Transfer or Mass Transfer, rather than all the three. This book presents this material in a single source. This avoids the user having to refer to a number of books to obtain information. Most published books covering all the three areas in a single source emphasize theory rather than practical issues. This book is written with emphasis on practice with brief theoretical concepts in the form of questions and answers, not adopting stereo-typed question-answer approach practiced in certain books in the market, bridging the two areas of theory and practice with respect to the core areas of chemical engineering. Most parts of the book are easily understandable by those who are not experts in the field. Fluid Mechanics chapters include basics on non-Newtonian systems which, for instance find importance in polymer and food processing, flow through piping, flow measurement, pumps, mixing technology and fluidization and two phase flow. For example it covers types of pumps and valves, membranes and areas of their use, different equipment commonly used in chemical industry and their merits and drawbacks. Heat Transfer chapters cover the basics involved in conduction, convection and radiation, with emphasis on insulation, heat exchangers, evaporators, condensers, reboilers and fired heaters. Design methods, performance, operational issues and maintenance problems are highlighted. Topics such as heat pipes, heat pumps, heat tracing, steam traps, refrigeration, cooling of electronic devices, NOx control find place in the book. Mass transfer chapters cover basics such as diffusion, theories, analogies, mass transfer coefficients and mass transfer with chemical reaction, equipment such as tray and packed columns, column internals including structural packings, design, operational and installation issues, drums and separators are discussed in good detail. Absorption, distillation, extraction and leaching with applications and design methods, including emerging practices involving Divided Wall and Petluk column arrangements, multicomponent separations, supercritical solvent extraction find place in the book.

Author: Stanley Middleman
Publisher:
ISBN: 9780471255369
Category :
Languages : en
Pages : 0

View

Book Description

Author: G. Hauke
Publisher: Springer Science & Business Media
ISBN: 1402085370
Category : Technology & Engineering
Languages : en
Pages : 301

View

Book Description
This book presents the foundations of fluid mechanics and transport phenomena in a concise way. It is suitable as an introduction to the subject as it contains many examples, proposed problems and a chapter for self-evaluation.