Introduction of Wave Set-Up Effects and Mass Flux to the Sea, Lake, and Overland Surges from Hurricanes (SLOSH) Model PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Introduction of Wave Set-Up Effects and Mass Flux to the Sea, Lake, and Overland Surges from Hurricanes (SLOSH) Model PDF full book. Access full book title Introduction of Wave Set-Up Effects and Mass Flux to the Sea, Lake, and Overland Surges from Hurricanes (SLOSH) Model by nist. Download full books in PDF and EPUB format.
Author: nist Publisher: ISBN: 9781494290504 Category : Languages : en Pages : 80
Book Description
Hurricanes wreak havoc on the lives and infrastructure ofcoastal communities. Storm surge, a local rise in sea level elevations, is perhaps the most devastating element of these tropical cyclones. Storm surge depends on the tidal stage, barometric pressure, Coriolis effects, wind stress, and wave forcing, as well as the local bathymetry. In the past,many storm surge numerical models, such as Sea, Lake, and Overland Surges from Hurricanes (SLOSH), neglect wave forcing components to conserve computational efficiency. This omission would surely be preferred when wave forcing is not significant. However, numerous situations couldnecessitate the inclusion of waves' effects to more correctly model the surge both spatially and temporally. In its effort to characterize the combined effects of hurricane hazards (hurricane wind, storm surge, and waves) for use in developing structural design criteria for coastal structures, NIST in collaboration with the NOAA's MeteorologicalDevelopment Laboratory (MDL) and the Oceanic and Atmospheric Research (OAR) has developed a methodology that incorporates hurricane science, hydrology, probabilistic methods, and structural engineering needs for use in developing site specific, risk-based design criteria for coastal structures subjected to the above hurricane hazards. This early effort utilizes program SLOSH for hydrodynamic simulations without consideration of wave effects. Recognizing that wave set-up and mass flux might have a significant influence on total storm surge levels, the NIST then collaborated with NOAA's National Hurricane Center (NHC) to provide funding and technical guidance to the University of Florida for the incorporation of a wave model into the SLOSH model to extend SLOSH capability. The result of this effort is described in this report.
Author: nist Publisher: ISBN: 9781494290504 Category : Languages : en Pages : 80
Book Description
Hurricanes wreak havoc on the lives and infrastructure ofcoastal communities. Storm surge, a local rise in sea level elevations, is perhaps the most devastating element of these tropical cyclones. Storm surge depends on the tidal stage, barometric pressure, Coriolis effects, wind stress, and wave forcing, as well as the local bathymetry. In the past,many storm surge numerical models, such as Sea, Lake, and Overland Surges from Hurricanes (SLOSH), neglect wave forcing components to conserve computational efficiency. This omission would surely be preferred when wave forcing is not significant. However, numerous situations couldnecessitate the inclusion of waves' effects to more correctly model the surge both spatially and temporally. In its effort to characterize the combined effects of hurricane hazards (hurricane wind, storm surge, and waves) for use in developing structural design criteria for coastal structures, NIST in collaboration with the NOAA's MeteorologicalDevelopment Laboratory (MDL) and the Oceanic and Atmospheric Research (OAR) has developed a methodology that incorporates hurricane science, hydrology, probabilistic methods, and structural engineering needs for use in developing site specific, risk-based design criteria for coastal structures subjected to the above hurricane hazards. This early effort utilizes program SLOSH for hydrodynamic simulations without consideration of wave effects. Recognizing that wave set-up and mass flux might have a significant influence on total storm surge levels, the NIST then collaborated with NOAA's National Hurricane Center (NHC) to provide funding and technical guidance to the University of Florida for the incorporation of a wave model into the SLOSH model to extend SLOSH capability. The result of this effort is described in this report.
Author: U.s. Department of Commerce Publisher: CreateSpace ISBN: 9781495992629 Category : Nature Languages : en Pages : 74
Book Description
Hurricanes wreak havoc on the lives and infrastructure of coastal communities. Storm surge, a local rise in sea elevations, is perhaps the most devastating element of these tropical cyclones. Storm surge depends on the tidal stage, barometric pressure, Coriolis effect, wind stress, and wave forcing, as well as the local bathymetry. In the past, many storm surge numerical models, such as Sea, Lake, and Overland Surges from Hurricanes (SLOSH) (JELESNIANSKI et al, 1992), neglect wave forcing components to conserve computational efficiency. However, numerous situations necessitate the inclusion of waves' effects to more correctly model the surge both spatially and temporally.
Author: Shaun W. Kline Publisher: ISBN: Category : Languages : en Pages :
Book Description
To this end, we conduct numerous tests of different forcing variations: wind-stress only, wind and wave stresses, and wind and wave stresses with mass flux transport. These options were simulated on three hurricanes and two SLOSH basins. The storms range in intensity between a Category 1 (34 m/s) and Hurricane Andrew, a Category 5 storm (74 m/s). Our two basins were chosen for bathymetric contrast: Tampa Bay, a shallow and gentle shelf, and Miami, which has a steeper and deeper shelf. Wave stresses and mass transports were obtained using the Simulating Waves Nearshore (SWAN) third-generation wave model with time dependent water level and wind inputs from the SLOSH wind-stress-only test.
Author: Emil Simiu Publisher: John Wiley & Sons ISBN: 1119375886 Category : Technology & Engineering Languages : en Pages : 533
Book Description
Provides structural engineers with the knowledge and practical tools needed to perform structural designs for wind that incorporate major technological, conceptual, analytical and computational advances achieved in the last two decades. With clear explanations and documentation of the concepts, methods, algorithms, and software available for accounting for wind loads in structural design, it also describes the wind engineer's contributions in sufficient detail that they can be effectively scrutinized by the structural engineer in charge of the design. Wind Effects on Structures: Modern Structural Design for Wind, 4th Edition is organized in four sections. The first covers atmospheric flows, extreme wind speeds, and bluff body aerodynamics. The second examines the design of buildings, and includes chapters on aerodynamic loads; dynamic and effective wind-induced loads; wind effects with specified MRIs; low-rise buildings; tall buildings; and more. The third part is devoted to aeroelastic effects, and covers both fundamentals and applications. The last part considers other structures and special topics such as trussed frameworks; offshore structures; and tornado effects. Offering readers the knowledge and practical tools needed to develop structural designs for wind loadings, this book: Points out significant limitations in the design of buildings based on such techniques as the high-frequency force balance Discusses powerful algorithms, tools, and software needed for the effective design for wind, and provides numerous examples of application Discusses techniques applicable to structures other than buildings, including stacks and suspended-span bridges Features several appendices on Elements of Probability and Statistics; Peaks-over-Threshold Poisson-Process Procedure for Estimating Peaks; estimates of the WTC Towers’ Response to Wind and their shortcomings; and more Wind Effects on Structures: Modern Structural Design for Wind, 4th Edition is an excellent text for structural engineers, wind engineers, and structural engineering students and faculty.
Author: Manish Aggarwal Publisher: ISBN: Category : Languages : en Pages :
Book Description
This thesis presents a technique for storm surge forecasting. Storm surge is the water that is pushed toward the shore by the force of the winds swirling around the storm. This advancing surge combines with the normal tides to create the hurricane storm tide, which can increase the mean water level by almost 20 feet. Numerical modeling is an important tool used for storm surge forecast. Numerical model ADCIRC (Advanced Circulation model; Luettich et al, 1992) is used in this thesis for simulating hurricanes. A statistical technique, EST (Empirical Statistical Technique) is used to generate life cycle storm surge values from the simulated hurricanes. These two models have been applied to Freeport, TX. The thesis also compares the results with the model SLOSH (Sea, Lake, and Overland Surges from Hurricanes), which is currently used for evacuation and planning. The present approach of classifying hurricanes according to their maximum sustained winds is analyzed. This approach is not found to applicable in all the cases and more research needs to be done. An alternate approach is suggested for hurricane storm surge estimation.
Author: nist
Author: nist
Author: U.s. Department of Commerce
Author: Long T. Phan
Author: Shaun W. Kline
Author: Emil Simiu
Author: United States. National Oceanic and Atmospheric Administration
Author: United States. Federal Emergency Management Agency
Author: 
Author: Manish Aggarwal
Author: Colin J. Hughes