Interference on a Model Afterbody from Downstream Support Hardware at Transonic Mach Numbers PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Interference on a Model Afterbody from Downstream Support Hardware at Transonic Mach Numbers PDF full book. Access full book title Interference on a Model Afterbody from Downstream Support Hardware at Transonic Mach Numbers by Earl A. Price (Jr.). Download full books in PDF and EPUB format.
Author: Earl A. Price (Jr.) Publisher: ISBN: Category : Aerodynamics, Transonic Languages : en Pages : 54
Book Description
An experimental program was conducted to parametrically study the interference on an afterbody model that would be produced by the aft-support blade used with a wingtip support system. Geometric variables included the blade axial location, thickness, span, chord, and leading- and trailing-edge contours. Data were obtained over the Mach number range from 0.6 to 1.2 with the model at zero angle of attack. Interference was evaluated by comparing afterbody drag from a reference configuration, which had the aft-support blade removed, to the various configurations with a blade installed. A reasonable correlation of the blade interference effects on the afterbody drag coefficient was obtained, which included the influence of support blade axial position and blockage. Decreasing blade leading-edge bluntness by a factor of two resulted in a significant reduction of interference in the Mach number range from 0.9 to 1.1. Significantly greater interference was measured without jet flow than with jet flow. It is shown that a Euler equation computer code is a useful tool for the design of minimum interference support systems. (Author).
Author: Earl A. Price (Jr.) Publisher: ISBN: Category : Aerodynamics, Transonic Languages : en Pages : 54
Book Description
An experimental program was conducted to parametrically study the interference on an afterbody model that would be produced by the aft-support blade used with a wingtip support system. Geometric variables included the blade axial location, thickness, span, chord, and leading- and trailing-edge contours. Data were obtained over the Mach number range from 0.6 to 1.2 with the model at zero angle of attack. Interference was evaluated by comparing afterbody drag from a reference configuration, which had the aft-support blade removed, to the various configurations with a blade installed. A reasonable correlation of the blade interference effects on the afterbody drag coefficient was obtained, which included the influence of support blade axial position and blockage. Decreasing blade leading-edge bluntness by a factor of two resulted in a significant reduction of interference in the Mach number range from 0.9 to 1.1. Significantly greater interference was measured without jet flow than with jet flow. It is shown that a Euler equation computer code is a useful tool for the design of minimum interference support systems. (Author).
Author: Earl A. Price (Jr.) Publisher: ISBN: Category : Aerodynamics, Transonic Languages : en Pages : 416
Book Description
A comprehensive experimental program was conducted to provide nozzle-afterbody data with a minimum interference support system on a 1/9-scale F-16 model and to determine the interference induced on the afterbody-nozzle region by a sting, a wingtip, and a strut model support system. The investigation was conducted over the Mach number range from 0.6 to 1.5 and at angles of attack from 0 to 9 deg. Interference was evaluated by comparison of nozzle-afterboy axial and normal forces obtained from integrating pressure data. The results include parametric studies of the efects of various components of the wingtip support system (i.e., the support blade axial position, wingtip boom diameter, boom spacing, and boom-tip axial location). High-pressure air at ambient temperature was utilized for exhaust plume simulation. The results indicate that a sting support passing through the nozzle with the jet effects simulated by an annular jet appears to offer a minimum interference support system for the type of nozzle-afterbody test described in this report.
Author: Publisher: ISBN: Category : Research Languages : en Pages : 932
Book Description
Sections 1-2. Keyword Index.--Section 3. Personal author index.--Section 4. Corporate author index.-- Section 5. Contract/grant number index, NTIS order/report number index 1-E.--Section 6. NTIS order/report number index F-Z.
Author: Earl A. Price (Jr.)
Author: Earl A. Price (Jr.)
Author: 
Author: Frederick C. Guyton
Author: 
Author: 
Author: Earl A. Price (Jr.)
Author: 
Author: A. M. O. Smith
Author: 
Author: