Improved Zirconium Alloys. Technical Progress Report, February 1 1961- February 28, 1961 PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Improved Zirconium Alloys. Technical Progress Report, February 1 1961- February 28, 1961 PDF full book. Access full book title Improved Zirconium Alloys. Technical Progress Report, February 1 1961- February 28, 1961 by . Download full books in PDF and EPUB format.
Author: Publisher: ISBN: Category : Languages : en Pages :
Book Description
The development of zirconium-base alloys possessing exceptionally good corrosion resistance to 680 deg F water or 750 deg --900 deg F steam and/or improved strength at elevated temperatures with corrosion resistance equivalent to Zircaloy-2 was investigated. Approximately 100 binary compositions were screened by corrosion testing in 680 deg F water and 750 deg F steam; selected compositions were exposed to 900 deg F steam. Data obtained indicated a number of highly promising bases for ternary alloy studies in superheated water or steam. On the basis of 2000-hour tests, alloys were obtained which initially satisfy the objectives for 680 deg F water. The compositions are based on Zr-Nb, Zr-Sn, and Zr-Sb with ternary additions of Te, Ge, or Nb. Initial data for exposure to 750 deg and 900 deg F steam indicate very promising corrosion behavior of some ternary alloys. (auth).
Author: Publisher: ISBN: Category : Languages : en Pages :
Book Description
The development of zirconium-base alloys possessing exceptionally good corrosion resistance to 680 deg F water or 750 deg --900 deg F steam and/or improved strength at elevated temperatures with corrosion resistance equivalent to Zircaloy-2 was investigated. Approximately 100 binary compositions were screened by corrosion testing in 680 deg F water and 750 deg F steam; selected compositions were exposed to 900 deg F steam. Data obtained indicated a number of highly promising bases for ternary alloy studies in superheated water or steam. On the basis of 2000-hour tests, alloys were obtained which initially satisfy the objectives for 680 deg F water. The compositions are based on Zr-Nb, Zr-Sn, and Zr-Sb with ternary additions of Te, Ge, or Nb. Initial data for exposure to 750 deg and 900 deg F steam indicate very promising corrosion behavior of some ternary alloys. (auth).
Author: Publisher: ISBN: Category : Languages : en Pages :
Book Description
Progress reported includes the selection of 15 ternary bases for further study in steam or water. About 75 compositions were prepared and are being arc- melted for fabrication into corrosion specimens. Investigations of Zr purity and heat treatment effects on corrosion are being continued. Included are data from corrosion tests on binary alloys with superheated water and steam, and a list of alloys for initial investigation based on results of corrosion screening tests. (J.H.D.).
Author: United States. Department of Commerce. Office of Technical Services Publisher: ISBN: Category : Government publications Languages : en Pages : 860
Author: United States. Department of Commerce. Office of Technical Services Publisher: ISBN: Category : Government publications Languages : en Pages : 990
Author: Publisher: ISBN: Category : Languages : en Pages :
Book Description
Specimens which previously showed promising corrosion resistance in 750 deg F steam sfter 329 hr exposure were reentered in test for an additional 480 hr. Additional tin alloys were included. The compositions Zr--0.5 Nb, Zr-IV, and Zr-- 1 Sb and the alloys Zr--Fe, Zr--Cr, and Zr--Mo appeared the most promising. The corrosion resistance of Zr--Sn alloys was not sufficient to consider the alloy for further development. (M.C.G.).
Author: Publisher: ISBN: Category : Languages : en Pages :
Book Description
Corrosion testing data are presented for a large number of Zr alloys in 68O deg F water (1043 and 1902 hr), 750 deg F steam (329 hr), and 900 deg F steam (97 hr). These alloys include Zircaloy-2 and Zr alloyed with Nb, Sn, V, Sb, C r, Cu, Fe, Si, W, Mo, Ta, Co, Pt, Pd, Rh, As, Bi, Te, Ge, Ag, and Ni. Tensile test data are also reported for ten of these alloys at 68O deg F; these alloys are Zr alloyed with Nb, Sn, Fe, V, Cr, Mo, Sb, and Co, in addition to unalloyed Zr and Zircaloy-2. (D.L.C.).
Author: Publisher: ISBN: Category : Languages : en Pages :
Book Description
Corrosion data for zirconium alloys exposed to 680 deg F water for 336 hr are presented. For this exposure time, all specimens exhibited the desirable tenacious, black oxide coating. Preliminary studies were made of the transformation kinetics of Zr-30 Nb, Zr-30 Nb-1 Mo, and Zr30 Nb-3 Mo alloys. Hot rolling these ingots at 1550 deg F resulted in severe edge cracking and excessive air contamination. Nevertheless, small specimens were betaquenched from 1000 deg C and isothermally transformed at 680 and 750 deg F. Hardness versus transformation time curves did not show the relatively sharp hardness increase which signifies the beginning of beta transformation. Corrosion specimens are being prepared for investigation of the effect of zirconium purity on corrosion resistance. (M.C.G.).
Author: 
Author: 
Author: 
Author: 
Author: United States. Department of Commerce. Office of Technical Services
Author: United States. Department of Commerce. Office of Technical Services
Author: 
Author: 
Author: 
Author: 
Author: