Author: Yann Meslem
Publisher:
ISBN:
Category :
Languages : en
Pages : 199
Book Description
La simulation de la combustion est aujourd'hui une étape indispensable dans les processus de conception et de mise au point des moteurs à combustion interne mais requiert de connaître les caractéristiques macroscopiques du spray (angle, longueur de pénétration, répartition des tailles de goutte), notamment dans le cadre des moteurs Diesel à injection directe. De précédentes études ont montré que le phénomène de cavitation, très présent dans l'injection Diesel haute pression, modifie les caractéristiques macroscopiques du spray. Le travail effectué durant cette thèse s'articule autour de la modélisation de la cavitation et de son impact sur l'atomisation dans le cadre de l'injection Diesel. Le modèle ELSA fournit à la fois une expression Lagrangienne de la zone diluée du spray et une expression Eulérienne de la zone dense du spray. Ainsi, il apporte les données relatives au spray d'une part, nécessaires aux calculs de combustion, et permet l'observation des interactions entre l'écoulement interne de l'injecteur et le développement du spray d'autre part. C'est pourquoi ce modèle a été choisi pour cette étude et développé de manière à prendre en compte le phénomène de cavitation. La majorité des modèles de cavitation est basée sur une version plus ou moins simplifiée de l'équation de Rayleigh-Plesset, qui régit la dynamique des bulles sphériques. Le modèle ici développé est basé sur cette équation dans une version complète et simplifiée. L'impact des phénomènes pris en compte dans cette équation a été préalablement étudié sur un cas réaliste d'injection Diesel haute pression. Finalement, la combinaison d'un modèle de cavitation, adapté aux configurations d'injection Diesel, et de l'approche ELSA pour représenter les zones denses diphasiques, permet d'obtenir une modélisation innovante de l'injection et de la cavitation. Les approches proposées sont testées sur une configuration académique dont l'écoulement interne ainsi que le spray ont été caractérisés.
Determination of a Cavitation Model to Consider Its Impact on the Atomization in Diesel Engine Injection
Author: Yann Meslem
Publisher:
ISBN:
Category :
Languages : en
Pages : 199
Book Description
La simulation de la combustion est aujourd'hui une étape indispensable dans les processus de conception et de mise au point des moteurs à combustion interne mais requiert de connaître les caractéristiques macroscopiques du spray (angle, longueur de pénétration, répartition des tailles de goutte), notamment dans le cadre des moteurs Diesel à injection directe. De précédentes études ont montré que le phénomène de cavitation, très présent dans l'injection Diesel haute pression, modifie les caractéristiques macroscopiques du spray. Le travail effectué durant cette thèse s'articule autour de la modélisation de la cavitation et de son impact sur l'atomisation dans le cadre de l'injection Diesel. Le modèle ELSA fournit à la fois une expression Lagrangienne de la zone diluée du spray et une expression Eulérienne de la zone dense du spray. Ainsi, il apporte les données relatives au spray d'une part, nécessaires aux calculs de combustion, et permet l'observation des interactions entre l'écoulement interne de l'injecteur et le développement du spray d'autre part. C'est pourquoi ce modèle a été choisi pour cette étude et développé de manière à prendre en compte le phénomène de cavitation. La majorité des modèles de cavitation est basée sur une version plus ou moins simplifiée de l'équation de Rayleigh-Plesset, qui régit la dynamique des bulles sphériques. Le modèle ici développé est basé sur cette équation dans une version complète et simplifiée. L'impact des phénomènes pris en compte dans cette équation a été préalablement étudié sur un cas réaliste d'injection Diesel haute pression. Finalement, la combinaison d'un modèle de cavitation, adapté aux configurations d'injection Diesel, et de l'approche ELSA pour représenter les zones denses diphasiques, permet d'obtenir une modélisation innovante de l'injection et de la cavitation. Les approches proposées sont testées sur une configuration académique dont l'écoulement interne ainsi que le spray ont été caractérisés.
Publisher:
ISBN:
Category :
Languages : en
Pages : 199
Book Description
La simulation de la combustion est aujourd'hui une étape indispensable dans les processus de conception et de mise au point des moteurs à combustion interne mais requiert de connaître les caractéristiques macroscopiques du spray (angle, longueur de pénétration, répartition des tailles de goutte), notamment dans le cadre des moteurs Diesel à injection directe. De précédentes études ont montré que le phénomène de cavitation, très présent dans l'injection Diesel haute pression, modifie les caractéristiques macroscopiques du spray. Le travail effectué durant cette thèse s'articule autour de la modélisation de la cavitation et de son impact sur l'atomisation dans le cadre de l'injection Diesel. Le modèle ELSA fournit à la fois une expression Lagrangienne de la zone diluée du spray et une expression Eulérienne de la zone dense du spray. Ainsi, il apporte les données relatives au spray d'une part, nécessaires aux calculs de combustion, et permet l'observation des interactions entre l'écoulement interne de l'injecteur et le développement du spray d'autre part. C'est pourquoi ce modèle a été choisi pour cette étude et développé de manière à prendre en compte le phénomène de cavitation. La majorité des modèles de cavitation est basée sur une version plus ou moins simplifiée de l'équation de Rayleigh-Plesset, qui régit la dynamique des bulles sphériques. Le modèle ici développé est basé sur cette équation dans une version complète et simplifiée. L'impact des phénomènes pris en compte dans cette équation a été préalablement étudié sur un cas réaliste d'injection Diesel haute pression. Finalement, la combinaison d'un modèle de cavitation, adapté aux configurations d'injection Diesel, et de l'approche ELSA pour représenter les zones denses diphasiques, permet d'obtenir une modélisation innovante de l'injection et de la cavitation. Les approches proposées sont testées sur une configuration académique dont l'écoulement interne ainsi que le spray ont été caractérisés.
Faecal Sludge Management
Author: Linda Strande
Publisher: IWA Publishing
ISBN: 1780404735
Category : Technology & Engineering
Languages : en
Pages : 428
Book Description
It is estimated that literally billions of residents in urban and peri-urban areas of Africa, Asia, and Latin America are served by onsite sanitation systems (e.g. various types of latrines and septic tanks). Until recently, the management of faecal sludge from these onsite systems has been grossly neglected, partially as a result of them being considered temporary solutions until sewer-based systems could be implemented. However, the perception of onsite or decentralized sanitation technologies for urban areas is gradually changing, and is increasingly being considered as long-term, sustainable options in urban areas, especially in low- and middle-income countries that lack sewer infrastructures. This is the first book dedicated to faecal sludge management. It compiles the current state of knowledge of the rapidly evolving field of faecal sludge management, and presents an integrated approach that includes technology, management, and planning based on Sandecs 20 years of experience in the field. Faecal Sludge Management: Systems Approach for Implementation and Operation addresses the organization of the entire faecal sludge management service chain, from the collection and transport of sludge, and the current state of knowledge of treatment options, to the final end use or disposal of treated sludge. The book also presents important factors to consider when evaluating and upscaling new treatment technology options. The book is designed for undergraduate and graduate students, and engineers and practitioners in the field who have some basic knowledge of environmental and/or wastewater engineering.
Publisher: IWA Publishing
ISBN: 1780404735
Category : Technology & Engineering
Languages : en
Pages : 428
Book Description
It is estimated that literally billions of residents in urban and peri-urban areas of Africa, Asia, and Latin America are served by onsite sanitation systems (e.g. various types of latrines and septic tanks). Until recently, the management of faecal sludge from these onsite systems has been grossly neglected, partially as a result of them being considered temporary solutions until sewer-based systems could be implemented. However, the perception of onsite or decentralized sanitation technologies for urban areas is gradually changing, and is increasingly being considered as long-term, sustainable options in urban areas, especially in low- and middle-income countries that lack sewer infrastructures. This is the first book dedicated to faecal sludge management. It compiles the current state of knowledge of the rapidly evolving field of faecal sludge management, and presents an integrated approach that includes technology, management, and planning based on Sandecs 20 years of experience in the field. Faecal Sludge Management: Systems Approach for Implementation and Operation addresses the organization of the entire faecal sludge management service chain, from the collection and transport of sludge, and the current state of knowledge of treatment options, to the final end use or disposal of treated sludge. The book also presents important factors to consider when evaluating and upscaling new treatment technology options. The book is designed for undergraduate and graduate students, and engineers and practitioners in the field who have some basic knowledge of environmental and/or wastewater engineering.
Dictionary of Building and Civil Engineering
Author: Don Montague
Publisher: Taylor & Francis
ISBN: 9780419199106
Category : Architecture
Languages : en
Pages : 472
Book Description
This dual-language dictionary lists over 20,000 specialist terms in both French and English, covering architecture, building, engineering and property terms. It meets the needs of all building professionals working on projects overseas. It has been comprehensively researched and compiled to provide an invaluable reference source in an increasingly European marketplace.
Publisher: Taylor & Francis
ISBN: 9780419199106
Category : Architecture
Languages : en
Pages : 472
Book Description
This dual-language dictionary lists over 20,000 specialist terms in both French and English, covering architecture, building, engineering and property terms. It meets the needs of all building professionals working on projects overseas. It has been comprehensively researched and compiled to provide an invaluable reference source in an increasingly European marketplace.
Health Effects of Environmental Pollution
How to Design Wastewater Systems for Local Conditions in Developing Countries
Author: David M. Robbins
Publisher: IWA Publishing
ISBN: 178040476X
Category : Science
Languages : en
Pages : 148
Book Description
This is a practical handbook providing a step-by-step approach to the techniques used for characterizing wastewater sources and investigating sites where collection, treatment and reuse/disposal technologies will be installed. It is intended to help enable local implementation of on-site and decentralized wastewater management system (DWMS)for wide scale use in development settings. How to Design Wastewater Systems for Local Conditions in Developing Countries helps local service providers and regulatory officials make informed decisions through the use of tools, checklists and case studies. It includes a link to a web based community of on-site and decentralized wastewater professionals, which contains related tools and case studies. This handbook serves as a reference for training classes, certification programs, and higher education programs in civil and sanitary engineering. There is an increasing interest on the part of local government officials and private sector service providers to implement wastewater treatment systems to solve sanitation problems. The model presented in this handbook promotes activities that first generate data related to source and site conditions that represent critical inputs, and then applies this information to the technology selection process. Matching the most appropriate technologies to the specific needs of the wastewater project is the key that leads to long term sustainability. How to Design Wastewater Systems for Local Conditions in Developing Countries is an invaluable resource for public sector decision makers and private sector service providers in developing countries. It is also a useful text for students at engineering colleges in developing countries interested in taking a class that teaches the methods of decentralized wastewater management system (DWMS) development.
Publisher: IWA Publishing
ISBN: 178040476X
Category : Science
Languages : en
Pages : 148
Book Description
This is a practical handbook providing a step-by-step approach to the techniques used for characterizing wastewater sources and investigating sites where collection, treatment and reuse/disposal technologies will be installed. It is intended to help enable local implementation of on-site and decentralized wastewater management system (DWMS)for wide scale use in development settings. How to Design Wastewater Systems for Local Conditions in Developing Countries helps local service providers and regulatory officials make informed decisions through the use of tools, checklists and case studies. It includes a link to a web based community of on-site and decentralized wastewater professionals, which contains related tools and case studies. This handbook serves as a reference for training classes, certification programs, and higher education programs in civil and sanitary engineering. There is an increasing interest on the part of local government officials and private sector service providers to implement wastewater treatment systems to solve sanitation problems. The model presented in this handbook promotes activities that first generate data related to source and site conditions that represent critical inputs, and then applies this information to the technology selection process. Matching the most appropriate technologies to the specific needs of the wastewater project is the key that leads to long term sustainability. How to Design Wastewater Systems for Local Conditions in Developing Countries is an invaluable resource for public sector decision makers and private sector service providers in developing countries. It is also a useful text for students at engineering colleges in developing countries interested in taking a class that teaches the methods of decentralized wastewater management system (DWMS) development.
Compendium of Sanitation Systems and Technologies
Author: Elizabeth Tilley
Publisher:
ISBN: 9783906484570
Category :
Languages : en
Pages : 176
Book Description
Publisher:
ISBN: 9783906484570
Category :
Languages : en
Pages : 176
Book Description
Philostratus
Author: Philostratus (the Athenian)
Publisher:
ISBN:
Category :
Languages : en
Pages : 280
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 280
Book Description
Black Bass Diversity
Author: Michael D. Tringali
Publisher:
ISBN: 9781934874400
Category : Aquatic biodiversity conservation
Languages : en
Pages : 685
Book Description
Publisher:
ISBN: 9781934874400
Category : Aquatic biodiversity conservation
Languages : en
Pages : 685
Book Description
The Science of metals
Analecta: Or, Materials For a History of Remarkable Providences; Mostly Relating to Scotch Ministers and Christians
Author: Robert Wodrow
Publisher: BoD – Books on Demand
ISBN: 3385129664
Category : Fiction
Languages : en
Pages : 410
Book Description
Reprint of the original, first published in 1842.
Publisher: BoD – Books on Demand
ISBN: 3385129664
Category : Fiction
Languages : en
Pages : 410
Book Description
Reprint of the original, first published in 1842.