Author: Publisher: ASTM International
ISBN:
Category :
Languages : en
Pages : 54
Book Description
Low Cycle Fatigue
Author: Harvey D. SolomonPublisher: ASTM International
ISBN: 080310944X
Category : Engineering design
Languages : en
Pages : 1289
Book Description
Advances in Multiaxial Fatigue
Author: David L. McDowellPublisher: ASTM International
ISBN: 0803118627
Category : Alloys
Languages : en
Pages : 455
Book Description
Papers presented at the ASTM Symposium on Multiaxial Fatigue, held in San Diego, November 1991, to communicate the most recent international advances in multiaxial cyclic deformation and fatigue research as well as applications to component analysis and design. The 24 papers are grouped into five ca
Fatigue Damage, Crack Growth and Life Prediction
Author: F. EllyinPublisher: Springer Science & Business Media
ISBN: 9400915098
Category : Technology & Engineering
Languages : en
Pages : 484
Book Description
Fatigue failure is a multi-stage process. It begins with the initiation of cracks, and with continued cyclic loading the cracks propagate, finally leading to the rupture of a component or specimen. The demarcation between the above stages is not well-defined. Depending upon the scale of interest, the variation may span three orders of magnitude. For example, to a material scientist an initiated crack may be of the order of a micron, whereas for an engineer it can be of the order of a millimetre. It is not surprising therefore to see that investigation of the fatigue process has followed different paths depending upon the scale of phenomenon under investigation. Interest in the study of fatigue failure increased with the advent of industrial ization. Because of the urgent need to design against fatigue failure, early investiga tors focused on prototype testing and proposed failure criteria similar to design formulae. Thus, a methodology developed whereby the fatigue theories were proposed based on experimental observations, albeit at times with limited scope. This type of phenomenological approach progressed rapidly during the past four decades as closed-loop testing machines became available.
Fatigue and Corrosion in Metals
Author: Pietro Paolo MilellaPublisher: Springer Science & Business Media
ISBN: 884702336X
Category : Technology & Engineering
Languages : en
Pages : 853
Book Description
This textbook, suitable for students, researchers and engineers, gathers the experience of more than 20 years of teaching fracture mechanics, fatigue and corrosion to professional engineers and running experimental tests and verifications to solve practical problems in engineering applications. As such, it is a comprehensive blend of fundamental knowledge and technical tools to address the issues of fatigue and corrosion. The book initiates with a systematic description of fatigue from a phenomenological point of view, since the early signs of submicroscopic damage in few surface grains and continues describing, step by step, how these precursors develop to become mechanically small cracks and, eventually, macrocracks whose growth is governed by fracture mechanics. But fracture mechanics is also introduced to analyze stress corrosion and corrosion assisted fatigue in a rather advanced fashion. The author dedicates a particular attention to corrosion starting with an electrochemical treatment that mechanical engineers with a rather limited knowledge of electrochemistry will well digest without any pain. The electrochemical introduction is considered an essential requirement to the full understanding of corrosion that is essentially an electrochemical process. All stress corrosion aspects are treated, from the generalized film rupture-anodic dissolution process that is the base of any corrosion mechanism to the aggression occurring in either mechanically or thermally sensitized alloys up to the universe of hydrogen embrittlement, which is described in all its possible modes of appearance. Multiaxial fatigue and out-of-phase loading conditions are treated in a rather comprehensive manner together with damage progression and accumulation that are not linear processes. Load spectra are analyzed also in the frequency domain using the Fourier transform in a rather elegant fashion full of applications that are generally not considered at all in fatigue textbooks, yet they deserve a special place and attention. The issue of fatigue cannot be treated without a probabilistic approach unless the designer accepts the shame of one-out-of-two pieces failure. The reader is fully introduced to the most promising and advanced analytical tools that do not require a normal or lognormal distribution of the experimental data, which is the most common case in fatigue. But the probabilistic approach is also used to introduce the fundamental issue of process volume that is the base of any engineering application of fatigue, from the probability of failure to the notch effect, from the metallurgical variability and size effect to the load type effect. Fractography plays a fundamental role in the post mortem analysis of fatigue and corrosion failures since it can unveil the mystery encrypted in any failure.
Multiaxial Fatigue
Author: Darrell SociePublisher: SAE International
ISBN: 0768065100
Category : Technology & Engineering
Languages : en
Pages : 510
Book Description
This book provides practicing engineers, researchers, and students with a working knowledge of the fatigue design process and models under multiaxial states of stress and strain. Readers are introduced to the important considerations of multiaxial fatigue that differentiate it from uniaxial fatigue.
Biaxial/Multiaxial Fatigue and Fracture
Author: Andrea CarpinteriPublisher: Elsevier
ISBN: 0080527817
Category : Technology & Engineering
Languages : en
Pages : 517
Book Description
The European Structural Integrity Society (ESIS) Technical Commitee on Fatigue of Engineering Materials and Structures (TC3) decided to compile a Special Technical Publication (ESIS STP) based on the 115 papers presented at the 6th International Conference on Biaxial/Multiaxial Fatigue and Fracture. The 25 papers included in the STP have been extended and revised by the authors. The conference was held in Lisbon, Portugal, on 25-28 June 2001, and was chaired by Manual De Freitas, Instituto Superior Tecnico, Lisbon. The meeting, organised by the Instituto Superior Tecnico and sponsored by the Portuguese Minesterio da Cienca e da Tecnologia and by the European Structural Integrity Society, was attended by 151 delegates from 20 countries. The papers in the present book deal with the theoretical, numerical and experimental aspects of the Multiaxial fatigue and fracture of engineering materials and structures. They are divided in to the following six sections; Multiaxial Fatigue of Welded Structures; High cycle Multiaxial fatigue; Non proportional and Variable-Amplitude loading; Defects, Notches, Crack Growth; Low Cycle Multiaxial Fatigue; Applications and Testing Methods. As is well-known, most engineering components and structures in the mechanical, aerospace, power generation, and other industries are subjected to multiaxial loading during their service life. One of the most difficult tasks in design against fatigue and fracture is to translate the information gathered from uniaxial fatigue and fracture tests on engineering materials into applications involving complex states of cyclic stress-strain conditions. This book is the result of co-operation between many researchers from different laboratories, universities and industries in a number of countries.
Factors that Affect the Precision of Mechanical Tests
Author: Ralph PapirnoPublisher: ASTM International
ISBN: 0803112513
Category : Hardness
Languages : en
Pages : 252
Book Description
The 17 peer-reviewed papers describe investigations where the precision of test procedures were either examined (to study the precision) or enhanced (to increase the precision). Topics include hardness testing, fatigue and fracture testing, and specimen alignment and gripping problems. Annotation co
Scientific and Technical Aerospace Reports
Author: Cyclic Deformation, Fracture, and Nondestructive Evaluation of Advanced Materials
Author: Michael R. MitchellPublisher: ASTM International
ISBN: 0803119895
Category : Composite materials
Languages : en
Pages : 405
Book Description
Examines the initiation and growth of fatigue cracks and the fracture toughness of advanced materials such as silicon nitride, special alloys and steels, thermoplastics, and graphite-epoxy composites; and explains several non-destructive techniques to evaluate such materials for manufacturing defect
Author: