Author: Joachim SchömannPublisher:
ISBN: 9783843918473
Category :
Languages : de
Pages : 188
Book Description
Hybrid-Electric Propulsion Systems for Small Unmanned Aircraft
Author: Joachim SchömannPublisher:
ISBN: 9783843918473
Category :
Languages : de
Pages : 188
Book Description
Analysis of Hybrid-electric Propulsion System Designs for Small Unmanned Aircraft Systems
Author: Ryan M. HiserotePublisher:
ISBN:
Category : Drone aircraft
Languages : en
Pages : 258
Book Description
Neural Network Control of a Parallel Hybrid-electric Propulsion System for a Small Unmanned Aerial Vehicle
Author: Frederick G. HarmonPublisher:
ISBN:
Category :
Languages : en
Pages : 566
Book Description
Parallel hybrid-electric propulsion systems would be beneficial for small unmanned aerial vehicles (UAVs) used for military, homeland security, and disaster monitoring missions involving intelligence, surveillance, or reconnaissance (ISR). The benefits include increased time-on-station and range than electric-powered UAVs and stealth modes not available with gasoline-powered UAVs. A conceptual design of a small UAV with a parallel hybrid-electric propulsion system, an optimization routine for the energy use, the application of a neural network to approximate the optimization results, and simulation results are provided. The two-point conceptual design includes an internal combustion engine sized for cruise and an electric motor and lithium-ion battery pack sized for endurance speed. The flexible optimization routine allows relative importance to be assigned between the use of gasoline, electricity, and recharging. The Cerebellar Model Arithmetic Computer (CMAC) neural network approximates the optimization results and is applied to the control of the parallel hybrid-electric propulsion system. The CMAC controller saves on the required memory compared to a large look-up table by two orders of magnitude. The energy use for the hybrid-electric UAV with the CMAC controller during a one-hour and a three-hour ISR mission is 58% and 27% less, respectively, than for a gasoline-powered UAV.
Commercial Aircraft Propulsion and Energy Systems Research
Author: National Academies of Sciences, Engineering, and MedicinePublisher: National Academies Press
ISBN: 0309440998
Category : Technology & Engineering
Languages : en
Pages : 123
Book Description
The primary human activities that release carbon dioxide (CO2) into the atmosphere are the combustion of fossil fuels (coal, natural gas, and oil) to generate electricity, the provision of energy for transportation, and as a consequence of some industrial processes. Although aviation CO2 emissions only make up approximately 2.0 to 2.5 percent of total global annual CO2 emissions, research to reduce CO2 emissions is urgent because (1) such reductions may be legislated even as commercial air travel grows, (2) because it takes new technology a long time to propagate into and through the aviation fleet, and (3) because of the ongoing impact of global CO2 emissions. Commercial Aircraft Propulsion and Energy Systems Research develops a national research agenda for reducing CO2 emissions from commercial aviation. This report focuses on propulsion and energy technologies for reducing carbon emissions from large, commercial aircraftâ€" single-aisle and twin-aisle aircraft that carry 100 or more passengersâ€"because such aircraft account for more than 90 percent of global emissions from commercial aircraft. Moreover, while smaller aircraft also emit CO2, they make only a minor contribution to global emissions, and many technologies that reduce CO2 emissions for large aircraft also apply to smaller aircraft. As commercial aviation continues to grow in terms of revenue-passenger miles and cargo ton miles, CO2 emissions are expected to increase. To reduce the contribution of aviation to climate change, it is essential to improve the effectiveness of ongoing efforts to reduce emissions and initiate research into new approaches.
So You Want to Design Engines
Author: William KucinskiPublisher: SAE International
ISBN: 0768091780
Category : Technology & Engineering
Languages : en
Pages : 72
Book Description
As unmanned aerial vehicles (UAVs) fill a wider and wider variety of civic, scientific, and military roles—analysts predict that the UAV market will be the most dynamic growth sector of the decade in terms of the world aerospace industry. As a result, UAV research and development will contribute to a major portion of spending in the next decades—with a significant emphasis on propulsion technologies. This book will cover several UAV propulsion technologies, ranging from modification of conservative designs to assessing the potential of unconventional arrangements. Each chapter provides a glimpse of how researchers are leveraging different fuel types, powerplants, and system architectures in the pursuit of powerful, efficient, and robust UAV propulsion. By developing higher-performing propulsion systems—whether through the refinement of existing technologies like two-stroke heavy-fuel engines and hybrid-electric arrangements or the investigation of new concepts such as dielectric barrier discharge—engineers will be able to increase UAV capabilities for the world’s developing aviation needs.
Evaluation of Hybrid-electric Propulsion Systems for Unmanned Aerial Vehicles
Author: Jay Michael Todd MatlockPublisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The future of aviation technology is transitioning to cleaner, more efficient and higher endurance aircraft solutions. As fully electric propulsion systems still fall short of the operational requirements of modern day aircraft, there is increasing pressure and demand for the aviation industry to explore alternatives to fossil fuel driven propulsion systems. The primary focus of this research is to experimentally evaluate hybrid electric propulsion systems (HEPS) for Unmanned Aerial Vehicles (UAV) which combine multiple power sources to improve performance. HEPS offer several potential benefits over more conventional propulsion systems such as a smaller environmental impact, lower fuel consumption, higher endurance and novel configurations through distributed propulsion. Advanced operating modes are also possible with HEPS, increasing the vehicle's versatility and redundancy in case of power source failure. The primary objective of the research is to combine all of the components of a small-scale HEPS together in a modular test bench for evaluation. The test bench uses components sized for a small-scale UAV including a 2.34kW two-stroke 35cc engine and a 1.65kW brushless DC motor together with an ESC capable of regenerative braking. Individual components were first tested to characterize performance, and then all components were assembled together in a parallel configuration to observe system-level performance. The parallel HEPS is capable of functioning in the four required operating modes: EM Only, ICE Only, Dash Mode (combined EM and ICE power) as well as Regenerative Mode where the onboard batteries get recharged. Further, the test bench was implemented with a supervisory controller to optimize system performance and run each component in the most efficient region to achieve torque requirements programmed into mission profiles. The logic based controller operates with the ideal operating line (IOL) concept and is implemented with a custom LabView GUI. The system is able to run on electric power or ICE power interchangeably without making any modifications to the transmission as the one-way bearing assembly engages for whichever power source is rotating at the highest speed. The most impressive of these sets of tests is the Dash mode testing where the output torque of the propeller is supplied from both the EM and ICE. Working in tandem, it was proved that the EM was drawing 19.9A of current which corresponds to an estimated 0.57Nm additional torque to the propeller for a degree of hybridization of 49.91%. Finally, the regenerative braking mode was proven to be operational, capable of recharging the battery systems at 13A. All of these operating modes attest to the flexibility and convenience of having a hybrid-electric propulsion system. The results collected from the test bench were validated against the models created in the aircraft simulation framework. This framework was created in MATLAB to simulate the performance of a small UAV and compare the performance by swapping in various propulsion systems. The purpose of the framework is to make direct comparisons of HEPS performance for parallel and series architectures against conventional electric and gasoline configuration UAVs, and explore the trade-offs. Each aircraft variable in the framework was modelled parametrically so that parameter sweeps could be run to observe the impact on the aircraft's performance. Finally, rather than comparing propulsion systems in steady-state, complex mission profiles were created that simulate real life applications for UAVs. With these experiments, it was possible to observe which propulsion configurations were best suited for each mission type, and provide engineers with information about the trade-offs or advantages of integrating hybrid-electric propulsion into UAV design. In the Pipeline Inspection mission, the exact payload capacities of each aircraft configuration could be observed in the fuel burn versus CL,cruise parameter sweep exercise. It was observed that the parallel HEPS configuration has an average of 3.52kg lower payload capacity for the 35kg aircraft (17.6%), but has a fuel consumption reduction of up to 26.1% compared to the gasoline aircraft configuration. In the LIDAR Data collection mission, the electric configuration could be suitable for collection ranges below 100km but suffers low LIDAR collection times. However, at 100km LIDAR collection range, the series HEPS has an endurance of 16hr and the parallel configuration has an endurance of 19hr. In the Interceptor mission, at 32kg TOW, the parallel HEPS configuration has an endurance/TOW of 1.3[hr/kg] compared to 1.15[hr/kg] for the gasoline aircraft. This result yields a 13% increase in endurance from 36.8hr for gasoline to 41.6hr for the parallel HEPS. Finally, in the Communications Relay mission, the gasoline configuration is recommended for all TOW above 28kg as it has the highest loiter endurance.
Optimization of Hybrid-electric Propulsion Systems for Small Remotely-piloted Aircraft
Author: Todd A. RotramelPublisher:
ISBN:
Category : Drone aircraft
Languages : en
Pages : 268
Book Description
Electrified Aircraft Propulsion
Author: Kiruba HaranPublisher: Cambridge University Press
ISBN: 1108321615
Category : Technology & Engineering
Languages : en
Pages : 318
Book Description
What are the benefits of electrified propulsion for large aircraft? What technology advancements are required to realize these benefits? How can the aerospace industry transition from today's technologies to state-of-the-art electrified systems? Learn the answers with this multidisciplinary text, combining expertise from leading researchers in electrified aircraft propulsion. The book includes broad coverage of electrification technologies – spanning power systems and power electronics, materials science, superconductivity and cryogenics, thermal management, battery chemistry, system design, and system optimization – and a clear-cut road map identifying remaining gaps between the current state-of-the-art and future performance technologies. Providing expert guidance on areas for future research and investment and an ideal introduction to cutting-edge advances and outstanding challenges in large electric aircraft design, this is a perfect resource for graduate students, researchers, electrical and aeronautical engineers, policymakers, and management professionals interested in next-generation commercial flight technologies.
Aerodynamics, Aeronautics, and Flight Mechanics
Author: Barnes W. McCormickPublisher: John Wiley & Sons
ISBN: 0471575062
Category : Technology & Engineering
Languages : en
Pages : 677
Book Description
A New Edition of the Most Effective Text/Reference in the Field! Aerodynamics, Aeronautics, and Flight Mechanics, Second Edition Barnes W. McCormick, Pennsylvania State University 57506-2 When the first edition of Aerodynamics, Aeronautics, and Flight Mechanics was published, it quickly became one of the most important teaching and reference tools in the field. Not only did generations of students learn from it, they continue to use it on the job-the first edition remains one of the most well-thumbed guides you'll find in an airplane company. Now this classic text/reference is available in a bold new edition. All new material and the interweaving of the computer throughout make the Second Edition even more practical and current than before! A New Edition as Complete and Applied as the First Both analytical and applied in nature, Aerodynamics, Aeronautics, and Flight Mechanics presents all necessary derivations to understand basic principles and then applies this material to specific examples. You'll find complete coverage of the full range of topics, from aerodynamics to propulsion to performance to stability and control. Plus, the new Second Edition boasts the same careful integration of concepts that was an acclaimed feature of the previous edition. For example, Chapters 9, 10, and 11 give a fully integrated presentation of static, dynamic, and automatic stability and control. These three chapters form the basis of a complete course on stability and control. New Features You'll Find in the Second Edition * A new chapter on helicopter and V/STOL aircraft- introduces a phase of aerodynamics not covered in most current texts * Even more material than the previous edition, including coverage of stealth airplanes and delta wings * Extensive use of the computer throughout- each chapter now contains several computer exercises * A computer disk with programs written by the author is available
Vehicle Propulsion Systems
Author: L. GuzzellaPublisher: Springer Science & Business Media
ISBN: 9783540251958
Category : Mathematics
Languages : en
Pages : 312
Book Description
Automobiles are responsible for a substantial part of the world's consumption of primary energy, mostly fossil liquid hydrocarbons. The reduction of the fuel consumption of these vehicles has become a top priority. Many ideas to reach that objective have been presented. In most cases these systems are more complex than the traditional approaches. For such complex systems a heuristic design approach fails. The only way to deal with this situation is to employ model-based methods. This text provides an introduction to the mathematical modeling and subsequent optimization of vehicle propulsion systems and their supervisory control algorithms.