Author: V. H. TroutnerPublisher:
ISBN:
Category : Aluminum
Languages : en
Pages : 124
Book Description
Uniform Aqueous Corrosion of Aluminum
Author: V. H. TroutnerPublisher:
ISBN:
Category : Aluminum
Languages : en
Pages : 124
Book Description
Investigation of the Corrosion Aspects of Selected Aluminum Alloys
Author: Karlis RiskevicsPublisher:
ISBN:
Category : Aluminum alloys
Languages : en
Pages : 148
Book Description
A literature survey and experimental results from investigations of aluminum corrosion under both static and dynamic test conditions are presented. Static corrosion tests were made on 8001, 8001 + 2.5% Mg and X2219 clad with M400 aluminum alloys. Dynamic corrosion tests were made only on the 8001 alloy. These tests were performed in three identical dynamic corrosion test loops. Initial tests in each loop were made to investigate corrosion behavior in high purity water at high temperatures and high flow velocities. Reproducibility tests were also carried out. An evaluation was made of aluminum-surface-area-to- watervolume-ratio effects on corrosion resistance. Prefilmed sample tests in which test specimens were prefilmed at two different temperatures in a static autoclave prior to the dynamic tests were also made. Results indicated that the corrosion rates of the 8001 aluminum alloy were too high for an economical design of the reactor core. A considerable amount of uncertainty was found to exist in the corrosion literature, as well as in the experimental data, regarding effects of various test parameters on corrosion behavior of this alloy. Time limitations for application to the Pathfinder reactor prohibited further investigation of this material. Consequently, a recommendation of the 8001 aluminum alloy as the boiling water reactor core cladding material, operating at Pathfinder conditions, could not be made.
ACNP
Author: Catalog of Technical Reports
Author: United States. Dept. of Commerce. Office of Technical ServicesPublisher:
ISBN:
Category :
Languages : en
Pages : 850
Book Description
A/CONF.15/P
Author: The Intergranular Corrosion of Aluminum in Superheated Steam
Author: C. GrootDevelopment of Corrosion-resistant Aluminum Alloys for High-temperature Water Service
Author: H. C. BowenPublisher:
ISBN:
Category : Nuclear fuel elements
Languages : en
Pages : 114
Book Description
Aerospace Alloys
Author: Stefano GialanellaPublisher: Springer Nature
ISBN: 3030244407
Category : Technology & Engineering
Languages : en
Pages : 583
Book Description
This book presents an up-to-date overview on the main classes of metallic materials currently used in aeronautical structures and propulsion engines and discusses other materials of potential interest for structural aerospace applications. The coverage encompasses light alloys such as aluminum-, magnesium-, and titanium-based alloys, including titanium aluminides; steels; superalloys; oxide dispersion strengthened alloys; refractory alloys; and related systems such as laminate composites. In each chapter, materials properties and relevant technological aspects, including processing, are presented. Individual chapters focus on coatings for gas turbine engines and hot corrosion of alloys and coatings. Readers will also find consideration of applications in aerospace-related fields. The book takes full account of the impact of energy saving and environmental issues on materials development, reflecting the major shifts that have occurred in the motivations guiding research efforts into the development of new materials systems. Aerospace Alloys will be a valuable reference for graduate students on materials science and engineering courses and will also provide useful information for engineers working in the aerospace, metallurgical, and energy production industries.
Developments in High Temperature Corrosion and Protection of Materials
Author: W GaoPublisher: Elsevier
ISBN: 1845694252
Category : Technology & Engineering
Languages : en
Pages : 677
Book Description
High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas turbines, jet engines and industrial plants. Engineers are constantly striving to understand and prevent this type of corrosion. This book examines the latest developments in the understanding of high temperature corrosion processes and protective oxide scales and coatings.Part one looks at high temperature corrosion. Chapters cover diffusion and solid state reactions, external and internal oxidation of alloys, metal dusting corrosion, tribological degradation, hot corrosion, and oxide scales on hot-rolled steel strips. Modern techniques for analysing high temperature oxidation and corrosion are also discussed. Part two discusses methods of protection using ceramics, composites, protective oxide scales and coatings. Chapters focus on layered ternary ceramics, alumina scales, Ti-Al intermetallic compounds, metal matrix composites, chemical vapour deposited silicon carbide, nanocrystalline coatings and thermal barrier coatings. Part three provides case studies illustrating some of the challenges of high temperature corrosion to industry and how they can be overcome. Case studies include the petrochemical industry, modern incinerators and oxidation processing of electronic materials.This book is a valuable reference tool for engineers who develop heat resistant materials, mechanical engineers who design and maintain high temperature equipment and plant, and research scientists and students who study high temperature corrosion and protection of materials. - Describes the latest developments in understanding high temperature corrosion - Presents the latest research by the leading innovators from around the globe - Case studies are provided to illustrate key points
AEC-Euratom Conference on Aqueous Corrosion of Reactor Materials
Author: Publisher:
ISBN:
Category : Corrosion and anti-corrosives
Languages : en
Pages : 474
Book Description