Author: Vasile Minea Publisher: CRC Press ISBN: 1000564320 Category : Science Languages : en Pages : 282
Book Description
Heating and Cooling with Ground-Source Heat Pumps in Cold and Moderate Climates: Fundamentals and Basic Concepts covers fundamentals and design principles of vertical and horizontal indirect and direct expansion closed-loop, as well as ground and surface-water ground-source heat pump systems. It explains the thermodynamic aspects of mechanical and thermochemical compression cycles of geothermal heat pumps, and describes the energetic, economic, and environmental aspects associated with the use of ground-source heat pump systems for heating and cooling residential and commercial/institutional buildings in moderate and cold climates. Based on the author's more than 30 years of technical experience Focuses on ground-source heat pump technologies that can be successfully applied in moderate and cold climates Discusses technical aspects as well as the most common and uncommon application fields of basic system configurations This work is aimed at designers of HVAC systems, as well as geological, mechanical, and chemical engineers implementing environmentally-friendly heating and cooling technologies for buildings.
Author: Vasile Minea Publisher: CRC Press ISBN: 1000564584 Category : Technology & Engineering Languages : en Pages : 841
Book Description
Heating and Cooling with Ground-Source Heat Pumps in Moderate and Cold Climates, Two-Volume Set focuses on the use of very low-temperature geothermal energy for heating and cooling residential, institutional, and industrial buildings, and aims to increase the design community’s awareness and knowledge of the benefits, design, and installation requirements of commercial/institutional building ground-source heat pumps (GSHP). This set helps readers assess applicability, select a GSHP system type, and estimate building thermal load to ensure proper size for ground-source subsystems, appropriate brine and groundwater flow rates, and apt design of building closed-loops with distributed or central geothermal heat pumps. The first volume addresses fundamentals and design principles of vertical and horizontal indirect and direct expansion closed-loop, as well as ground- and surface-water ground-source heat pump systems. It explains the thermodynamic aspects of mechanical and thermochemical compression cycles of geothermal heat pumps, as well as the energetic, economic, and environmental aspects associated with the use of ground-source heat pump systems for heating and cooling residential and commercial/institutional buildings in moderate and cold climates. The second volume focuses on applications and cases studies of ground-source heat pumps in moderate and cold climates. It details technical aspects, as well as the most common and uncommon application fields of basic system configurations. The principles of system integrations and applications in moderate and cold climates are also presented, each followed by case studies. This comprehensive work is aimed at designers of HVAC systems, as well as geological, mechanical, and chemical engineers implementing environmentally-friendly heating and cooling technologies for buildings.
Author: Vasile Minea Publisher: CRC Press ISBN: 1000564258 Category : Science Languages : en Pages : 443
Book Description
Heating and Cooling with Ground-Source Heat Pumps in Cold and Moderate Climates: Design Principles, Potential Applications and Case Studies focuses on applications and cases studies of ground-source heat pumps in moderate and cold climates. It details technical aspects (such as materials, thermal fluid carriers and pumping, and drilling/trenching technologies), as well as the most common and uncommon application fields for basic system configurations. The principles of system integrations and applications in moderate and cold climates (such as hybrid, solar-assisted, thermo-syphon, foundation, mines, snow melting, district heating and cooling ground-source heat pump systems, etc.) are also presented, each followed by case studies. Based on the author's more than 30 years of technical experience Discusses ground-source heat pump technologies that can be successfully applied in moderate and cold climates Presents several case studies, including successful energy results, as well as the main lessons learned This work is aimed at designers of HVAC systems, as well as geological, mechanical, and chemical engineers implementing environmentally-friendly heating and cooling technologies for buildings.
Author: Basel Ismail Publisher: BoD – Books on Demand ISBN: 1789846080 Category : Science Languages : en Pages : 94
Book Description
The geothermal resources of the Earth are enormous. The resource is considered to be an environmentally friendly clean energy source that could significantly contribute to the reduction of GHG emissions when utilized for electrical power generation or direct heating applications. The source of geothermal energy is the continuous heat energy flux flowing from the interior of the Earth toward its surface. Geothermal energy resources vary geographically, depending on the depth and temperature of the resource, the rock chemical composition, and the abundance of ground water. This book is the result of contributions from several experts and researchers worldwide. The introductory chapter highlights the principles of geothermal power generation using LEGE-ORC technology and presents a summary of the following book chapters. Due to its important utilization and future prospects, various interesting topics of research related to geothermal energy explorations are covered in this book. It is hoped that the book will become a useful source of information and basis for extended research for researchers, academics, policy makers, and practitioners in the area of renewable geothermal energy explorations.
Author: Stephen P. Kavanaugh Publisher: ISBN: 9781936504855 Category : Ground source heat pump systems Languages : en Pages : 0
Book Description
Geothermal Heating and Cooling is a complete revision of Ground-Source Heat Pumps: Design of Geothermal Systems for Commercial and Institutional Buildings, which is recognized as the primary reference for nonresidential ground-source heat pump (GSHP) installations. This new work takes advantage of the many lessons learned since the time of the original publication, when GSHPs were primarily residential applications. Many improvements have evolved, and performance data, both positive and negative, is now available to guide the development of best practices. This essential guide for HVAC design engineers, design-build contractors, GSHP subcontractors, and energy/construction managers also provides building owners and architects with insights into characteristics of quality engineering firms and the information that should be provided by design firms competing for GSHP projects.This revision draws on new ASHRAE and industry research in critical areas, as well as measured data from long-term installations and optimized installation practices used by high-production GSHP contractors. Nearly all chapters and appendices were completely rewritten, and they include coverage of closed-loop ground (ground-coupled), groundwater, and surface-water systems plus GSHP equipment and piping. Additional information on site characterization has been added, including a new hydrogeological chapter. Another new chapter contains results of recent field studies, energy and demand characteristics, and updated information to optimize GSHP system cost. While other publications deal primarily with ground-coupled heat pumps, this text includes detailed coverage of groundwater, surface-water, and GSHP costs.Tables, graphs, and equations are provided in both Inch-Pound (I-P) and International System (SI) units. As a bonus, supplemental Microsoft® Excel® macro-enabled spreadsheets for a variety of GSHP calculations accompany the text.
Author: Ruzhu Wang Publisher: Springer ISBN: 9783662491195 Category : Technology & Engineering Languages : en Pages : 0
Book Description
This handbook provides a comprehensive summary on the energy systems used in green buildings, with a particular focus on solar energy - the most common renewable energy source applied in this field. With the growing concern about environmental protections, the concepts of green building have been widely promoted and implemented in nowadays building designs and constructions. Among all, sustainable energy systems, including energy harvesting, conversion, and storage, is one of most important design factors in green buildings. Unlike traditional energy systems which highly rely on fossil fuel, green buildings utilize renewable energy source or high efficient energy systems, or both, to provide environmental friendly, low carbon waste energy. The most updated concepts, designs, technologies developed and implemented in heat pumps, cooling systems, power systems, and energy storage will be discussed here in details. This handbook is subdivided into 7-9 main sections to provide an in-depth discussion from foundational principles to practical techniques. In addition, different cases about green energy systems implemented in global will be discussed. The book will be structured easy-to-read, to make it more accessible to graduate students and professionals in diverse scientific and engineering communities, including applied physics, civil engineering, electrical engineering, mechanical engineering, material engineering, and chemical engineering.
Author: Publisher: ISBN: Category : Dwellings Languages : en Pages : 40
Book Description
This report is in response to a request from the House Committee on Energy and Commerce that the Energy Information Administration (EIA) undertake a neutral, unbiased analysis of the cost, safety, and health and environmental effects of the three major heating fuels: heating oil, natural gas, and electricity. The Committee also asked EIA to examine the role of conservation in the choice of heating and cooling fuel. To accommodate a wide audience, EIA decided to respond to the Committee`s request in the context of a report on reducing home heating and cooling costs. Accordingly, this report discusses ways to weatherize the home, compares the features of the three major heating and cooling fuels, and comments on the types of heating and cooling systems on the market. The report also includes a worksheet and supporting tables that will help in the selection of a heating and/or cooling system.
Author: David Borge-Diez Publisher: Springer Nature ISBN: 3031245245 Category : Technology & Engineering Languages : en Pages : 326
Book Description
This book presents an overview of geothermal heating systems using ground source heat pumps in different countries. It evaluates the emissions and energy costs generated by the operation of low enthalpy geothermal systems, with heat pumps fed by different energy sources, and assesses, from an international point of view, those policies whose aim is a sustainable, low-carbon economy. The use of low-impact energy sources is gradually growing with the aim of reducing greenhouse gases emission and air pollution. The alternatives offered by geothermal systems are one of the key solutions for a future renewable development, enabling the electrification of heating systems and the use of biofuels. The book will be of interest to energy professionals and researchers.
Author: Ibrahim Dincer Publisher: Academic Press ISBN: 0124172113 Category : Science Languages : en Pages : 402
Book Description
Improve and optimize efficiency of HVAC and related energy systems from an exergy perspective. From fundamentals to advanced applications, Exergy Analysis of Heating, Air Conditioning, and Refrigeration provides readers with a clear and concise description of exergy analysis and its many uses. Focusing on the application of exergy methods to the primary technologies for heating, refrigerating, and air conditioning, Ibrahim Dincer and Marc A. Rosen demonstrate exactly how exergy can help improve and optimize efficiency, environmental performance, and cost-effectiveness. The book also discusses the analysis tools available, and includes many comprehensive case studies on current and emerging systems and technologies for real-world examples. From introducing exergy and thermodynamic fundamentals to presenting the use of exergy methods for heating, refrigeration, and air conditioning systems, this book equips any researcher or practicing engineer with the tools needed to learn and master the application of exergy analysis to these systems. - Explains the fundamentals of energy/exergy for practitioners/researchers in HVAC&R fields for improving efficiency - Covers environmental assessments and economic evaluations for a well-rounded approach to the subject - Includes comprehensive case studies on both current and emerging systems/technologies - Provides examples from a range of applications – from basic HVAC&R to more diverse processes such as industrial heating/cooling, cogeneration and trigeneration, and thermal storage
Author: Vasile Minea
Author: Vasile Minea
Author: Vasile Minea
Author: Basel Ismail
Author: Stephen P. Kavanaugh
Author: Ruzhu Wang
Author: 
Author: W. Calvin Kilgore
Author: David Borge-Diez
Author: Ibrahim Dincer