Author: Robert Paul BorthwickPublisher:
ISBN:
Category :
Languages : en
Pages : 176
Book Description
Fuel Injection Spray and Combustion Chamber Wall Impingement in Large Bore Industrial Diesel Engines
Author: Robert Paul BorthwickPublisher:
ISBN:
Category :
Languages : en
Pages : 176
Book Description
Combustion and Spray Visualization in a High-speed Direct-injected Engine
Author: Aakash PuntambekarSpray Characteristics of an Impinged Diesel Fuel Spray
Author: Scott P. MislevyCharacterization of Impinging Diesel Sprays with a Reduced-order Model and Gas Jet Experiments
Author: Daniel RuthPublisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The mixing of a diesel spray with in-cylinder gases is driven by both turbulent mixing during the free-jet penetration phase and by mixing during its impingement on surfaces such as the piston bowl. Current reduced order models, and many experiments, focus solely on the free-jet penetration phase, although jet-wall interaction occurs during a significant portion of the duration of a fuel injection in both small-bore and large-bore engines. A control volume-based model for the spreading of an impinging spray along a flat wall is presented as a first step towards capturing key jet processes during the impingement phase of fuel injection. Schlieren measurements of impinging gaseous jets are used to evaluate the model, and a strategy of accounting for the varying density in gas jet injections is introduced. The model, coupled with the free jet model of Musculus and Kattke, is shown to predict published impinging diesel data as well. The model is then used to compare global entrainment effects at various diesel conditions, providing a means for evaluating the effects of combustion parameters on entrainment with more realistic engine geometries. Finally, mixing phenomena relating to advanced combustion techniques, including rate-shaping and the use of multiple injections, are investigated with the model.
A Multi-zone Direct-injection Diesel Spray Combustion Model for Cycle Simulation Studies of Large-bore Engine Performance and Emissions
Author: Dohoy JungPublisher:
ISBN:
Category : Mechanical engineering
Languages : en
Pages : 330
Book Description
Modelling Diesel Combustion
Author: P. A. LakshminarayananPublisher: Springer Science & Business Media
ISBN: 904813885X
Category : Technology & Engineering
Languages : en
Pages : 313
Book Description
Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.
Diesel Ignition and Combustion Modeling with Comparisons to In-cylinder Flame Imaging
Author: Song-Charng KongInvestigation of Impinged Diesel Spray Hydrodynamics and Heat Transfer
Author: Richard A. BoothSome Experiments in Connexion with the Injection and Combustion of Fuel-oil in Diesel Engines
Author: Charles John HawkesPublisher:
ISBN:
Category : Diesel motor
Languages : en
Pages : 60
Book Description
The Spray Impingement Theory of Ignition Delay in Small Swirl-chamber Diesel Engines
Author: E. J. Ilmari Kurki-SuonioPublisher:
ISBN:
Category : Automobiles
Languages : en
Pages : 86
Book Description