Author: Imad L. Al-Qadi Publisher: ISBN: Category : Pavements, Asphalt Languages : en Pages : 68
Book Description
Laboratory fatigue testing was performed on six Superpave HMA mixtures in use at the Virginia Smart Road. Evaluation of the applied strain and resulting fatigue life was performed to fit regressions to predict the fatigue performance of each mixture. Differences in fatigue performance due to field and laboratory production and compaction methods were investigated. Also, in-situ mixtures were compared to mixtures produced accurately from the job mix formula to determine if changes occurring between the laboratory and batch plant significantly affected fatigue life. Results from the fatigue evaluation allowed verification of several hypotheses related to mixture production and compaction and fatigue performance. It was determined that location within the pavement surface, such as inner or outer wheelpath or center-of-lane, did not significantly affect laboratory fatigue test results, although the location will have significant effects on in-situ fatigue life. Also the orientation of samples cut from an in-situ pavement (parallel or perpendicular to the direction of traffic) had only a minor effect on the laboratory fatigue life, because the variability inherent in the pavement due to material variability is greater than the variability induced by compaction. Fatigue life of laboratory-compacted samples was found to be greater than fatigue life of field-compacted samples; additionally, the variability of the laboratory compacted mixture was found to be less than that of the field-compacted samples. However, it was also found that batch-plant production significantly reduces specimen variability as compared to small-batch laboratory production when the same laboratory compaction is used on both specimen sets. Finally, for Smart Road mixtures produced according to the job mix formula, the use of polymer-modified binder or stone matrix asphalt was shown to increase the expected fatigue life. However, results for all mixes indicated that fatigue resistance rankings might change depending on the applied strain level. This study contributes to the understanding of the factors involved in fatigue performance of asphalt mixtures. Considering that approximately 95% of Virginia's interstate and primary roadways incorporate asphalt surface mixtures, and that fatigue is a leading cause of deterioration, gains in the understanding of fatigue processes and prevention have great potential payoff by improving both the mixture and pavement design practices.
Author: Stacey D. Diefenderfer Publisher: ISBN: Category : Pavements, Asphalt Languages : en Pages : 74
Book Description
Laboratory creep and fatigue testing was performed on five Superpave surface hot-mix asphalt mixtures placed at the Virginia Smart Road. Differences in creep and fatigue response attributable to production and compaction methods were investigated. In addition, changes in creep response resulting from differences in specimen size were evaluated. Further, an evaluation of the effects of loading frequency, presence of rest periods, and specimen location within the pavement on fatigue life was conducted. Creep compliance values were determined using viscoelastic-based calculations, and time-temperature superposition was used to generate mastercurves. Reported creep compliance response models from the literature were found inadequate for accurately describing the creep compliance mastercurves generated during this study. Differences in creep response between specimens of different sizes were found to be due to specimen and test variability, rather than size. An evaluation of the effects of laboratory and plant production and laboratory and field compaction was inconclusive as material variability appeared greater than production or compaction variability. Simple regression models were found to be satisfactory for use in the development of prediction models for fatigue, although test data are necessary for calibration to particular mixture types. No relationships were found between fatigue model coefficients and volumetric properties of the mixtures tested because of the limited range of volumetric properties. Variability in volumetric properties between the mixtures produced at the plant and those produced to match the job mix formula did not significantly influence the predicted laboratory fatigue performance. Laboratory fatigue lives were similar between the laboratory-compacted fatigue specimens and specimens cut from the pavement; differences observed in performance were attributable to different air void contents. Predicted fatigue life was found to be statistically independent of the frequency of the applied loads or presence of rest periods for the mixtures, frequencies, and rest periods considered in this study. Minimal differences were observed between fatigue life predictions for plant-produced, field-compacted specimens cut from different locations in the pavement. This study contributes to the understanding of the factors involved in creep and fatigue performance of asphalt mixtures. The mixture responses characterized by this study are related to the rutting and fatigue performance of asphalt pavements. The choice of appropriate asphalt materials to resist rutting and fatigue deterioration will result in reduced maintenance needs and longer service lives for pavements.
Author: Marco Pasetto Publisher: Springer Nature ISBN: 3030297799 Category : Science Languages : en Pages : 507
Book Description
This volume highlights the latest advances, innovations, and applications in the field of asphalt pavement technology, as presented by leading international researchers and engineers at the 5th International Symposium on Asphalt Pavements & Environment (ISAP 2019 APE Symposium), held in Padua, Italy on September 11-13, 2019. It covers a diverse range of topics concerning materials and technologies for asphalt pavements, designed for sustainability and environmental compatibility: sustainable pavement materials, marginal materials for asphalt pavements, pavement structures, testing methods and performance, maintenance and management methods, urban heat island mitigation, energy harvesting, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Author: Wynand JvdM. Steyn Publisher: Transportation Research Board ISBN: 0309223660 Category : Technology & Engineering Languages : en Pages : 257
Book Description
"TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 433: Significant Findings from Full-Scale Accelerated Pavement Testing documents and summarizes significant findings from the various experimental activities associated with full-scale accelerated pavement testing (f-sAPT) programs that have taken place between 2000 and 2011. The report also identifies gaps in knowledge related to f-sAPT and where future research may be needed. NCHRP Synthesis 433 is designed to expand the f-sAPT base of knowledge documented in NCHRP Syntheses 325 and 235, both with the same title of Significant Findings from Full-Scale Accelerated Pavement Testing. f-sAPT is the controlled application of a wheel loading, at or above the appropriate legal load limit, to a pavement system to determine pavement response in a compressed time period. The acceleration of damage is achieved by one or more of the following factors: increased repetitions, modified loading conditions, imposed climatic conditions, and thinner pavements with a decreased structural capacity which have shorter design lives"--
Author: Publisher: AASHTO ISBN: 1560514280 Category : Pavements Languages : en Pages : 87
Book Description
This report contains guidelines and recommendations for managing and designing for friction on highway pavements. The contents of this report will be of interest to highway materials, construction, pavement management, safety, design, and research engineers, as well as others concerned with the friction and related surface characteristics of highway pavements.
Author: Krzysztof Blazejowski Publisher: CRC Press ISBN: 1439819726 Category : Technology & Engineering Languages : en Pages : 332
Book Description
In the years since the development and subsequent success of Stone Matrix Asphalt (SMA), a plethora of articles have emerged, scattered throughout various publications. The time is right for a comprehensive resource that collects, examines, and organizes this information and makes it easily accessible. A compilation and distillation of the latest k
Author: F. Pacheco-Torgal Publisher: Woodhead Publishing ISBN: 0128189827 Category : Technology & Engineering Languages : en Pages : 424
Book Description
Eco-efficient Pavement Construction Materials acquaints engineers with research findings on new eco-efficient pavement materials and how they can be incorporated into future pavements. Divided into three distinctive parts, the book emphasizes current research topics such as pavements with recycled waste, pavements for climate change mitigation, self-healing pavements, and pavements with energy harvesting potential. Part One considers techniques for recycling, Part Two reviews the contribution of pavements for climate change mitigation, including cool pavements, the development of new coatings for high albedo targets, and the design of pervious pavements. Finally, Part Three focuses on self-healing pavements, addressing novel materials and design and performance. Finally, the book discusses the case of pavements with energy harvesting potential, addressing different technologies on this field. - Offers a clear and concise lifecycle assessment of asphalt pavement recycling for greenhouse gas emission with temporal aspects - Applies key research trends to green the pavement industry - Includes techniques for recycling waste materials, the design of cool pavements, self-healing mechanisms, and key steps in energy harvesting
Author: Imad L. Al-Qadi
Author: Stacey D. Diefenderfer
Author: Marco Pasetto
Author: Wynand JvdM. Steyn
Author: 
Author: Krzysztof Blazejowski
Author: F. Pacheco-Torgal
Author: Association of Asphalt Paving Technologists
Author: 
Author: A. Gomes Correia