Author: Publisher:
ISBN:
Category : Radio frequency
Languages : en
Pages : 53
Book Description
Fabrication of ZnO Thin Film Using RF Magnetron Sputtering Plasma
Author: Fabrication and Characterization of DC Magnetron Sputtered ZnO Films
Author: Janet ManiateInvestigation of Relationship Between the Plasma and Material Characteristics of Zinc Oxide (ZnO) Thin Film by Radio Frequency (RF) Reactive Magnetron Sputtering
Author: Fabrication of Zinc Nitride Thin Films Using RF Magnetron Sputtering Deposition for Optoelectronic Applications
Author: Ting WenPublisher:
ISBN:
Category : Optoelectronics
Languages : en
Pages : 122
Book Description
Zinc nitride thin films possess a small optical band gap with direct transition, low resistivity, high mobility and carrier concentration. Therefore, it may be suitable as an optoelectronic material for infrared sensors, smart windows and energy conversion devices. The objective of this work is to grow zinc nitride thin films using RF magnetron sputtering, understand its mechanical, optical, and electrical properties, and investigate its performance as light sensing devices. Synthesis and characterization of zinc nitride thin films has been investigated in this work. An RF magnetron sputtering deposition was employed to synthesize zinc nitride thin films using pure metal zinc target in either N2-Ar or N2-Ar-H2 mixtures. The microstructural, optical and electrical characterizations of the representative films were investigated with stylus profilometry, XRD, AFM, SEM, TEM, UV-VIS-NIR double beam spectrometry, and Hall effect measurement. The photoresponse of the zinc nitride photoconductors was also studied under the irradiation of white light and NIR light. The as-deposited zinc nitride thin films were relatively soft and densely packed with smooth surface. It possesses a narrow optical band gap in the NIR range with direct transition. The zinc nitride showed n-type conductivity with low resistivity and high carrier concentration. To study the RF discharge power effect, the zinc nitride thin films were synthesized at different discharge powers densities. With discharge power density increasing, the film deposition rate increased, and the zinc nitride films acquired better crystalline structure, smaller optical band gap and less oxygen contaminations. After thermal annealing at moderate temperatures in either air or O2, the annealed zinc nitride thin films were photoconductive under irradiation of both NIR light and white light. The largest photoresponse and fastest response times were measured at the room temperature for the zinc nitride thin films annealed at 300 degree in the air. Hydrogen inclusion can modify the electrical and optical properties of crystalline semiconductor films by introducing impurity donor states. The ZnNx:H films deposited in N2-Ar-H2 mixture acquired less oxygen contamination and higher relative nitrogen atom concentration than the ZnNx films deposited in N2-Ar mixture. The as-deposited ZnNx:H films showed a clear photonic behavior under white light irradiation, and the annealed ZnNx:H films exhibited a pronounced change in resistance under both white light and NIR light irradiation comparing to the annealed ZnNx films. This was the first time to report photoresponse of zinc nitride thin films fabricated by reactive sputtering method. The photoconductivity was gradually improved by optimization of deposition conditions, annealing conditions and film compositions.
Fabrication Process of P-type ZnO Thin Film by RF Sputtering Technique
Author: Afef Ismail AbdulrazzaqPublisher:
ISBN:
Category :
Languages : en
Pages : 408
Book Description
The Fabrication of Codoped ZnO Thin Films by DC Magnetron Sputtering
Author: Haslinda Abdul HamidHandbook of Physical Vapor Deposition (PVD) Processing
Author: D. M. MattoxPublisher: Cambridge University Press
ISBN: 0080946585
Category : Technology & Engineering
Languages : en
Pages : 947
Book Description
This book covers all aspects of physical vapor deposition (PVD) process technology from the characterizing and preparing the substrate material, through deposition processing and film characterization, to post-deposition processing. The emphasis of the book is on the aspects of the process flow that are critical to economical deposition of films that can meet the required performance specifications. The book covers subjects seldom treated in the literature: substrate characterization, adhesion, cleaning and the processing. The book also covers the widely discussed subjects of vacuum technology and the fundamentals of individual deposition processes. However, the author uniquely relates these topics to the practical issues that arise in PVD processing, such as contamination control and film growth effects, which are also rarely discussed in the literature. In bringing these subjects together in one book, the reader can understand the interrelationship between various aspects of the film deposition processing and the resulting film properties. The author draws upon his long experience with developing PVD processes and troubleshooting the processes in the manufacturing environment, to provide useful hints for not only avoiding problems, but also for solving problems when they arise. He uses actual experiences, called ""war stories"", to emphasize certain points. Special formatting of the text allows a reader who is already knowledgeable in the subject to scan through a section and find discussions that are of particular interest. The author has tried to make the subject index as useful as possible so that the reader can rapidly go to sections of particular interest. Extensive references allow the reader to pursue subjects in greater detail if desired. The book is intended to be both an introduction for those who are new to the field and a valuable resource to those already in the field. The discussion of transferring technology between R&D and manufacturing provided in Appendix 1, will be of special interest to the manager or engineer responsible for moving a PVD product and process from R&D into production. Appendix 2 has an extensive listing of periodical publications and professional societies that relate to PVD processing. The extensive Glossary of Terms and Acronyms provided in Appendix 3 will be of particular use to students and to those not fully conversant with the terminology of PVD processing or with the English language.
Optical Properties of Zinc Oxide (ZnO) Thin Film by RF Magnetron Sputtering
Author: Khairul Nadzrin RosliPublisher:
ISBN:
Category :
Languages : en
Pages : 67
Book Description
Reactive High Power Impulse Magnetron Sputtering of Zinc Oxide for Thin Film Transistor Applications
Author: Amber Nicole ReedPublisher:
ISBN:
Category : Sputtering (Physics)
Languages : en
Pages : 158
Book Description
Zinc oxide (ZnO) is an emerging thin film transistor (TFT) material for transparent flexible displays and sensor technologies, where low temperature synthesis of highly crystallographically ordered films over large areas is critically needed. This study maps plasma assisted synthesis characteristics, establishes polycrystalline ZnO growth mechanisms and demonstrates for the first time low-temperature and scalable deposition of semiconducting grade ZnO channels for TFT applications using reactive high power impulse magnetron sputtering (HiPIMS). Plasma parameters, including target currents, ion species and their energies were measured at the substrate surface location with mass spectroscopy as a function of pressure and applied voltage during HiPIMS of Zn and ZnO targets in O2/Ar. The results were correlated to film microstructure development investigated with x-ray diffraction, atomic force microscopy, scanning electron microscopy and transmission electron microscopy which helped establish film nucleation and growth mechanisms. Competition for nucleation by (100), (101) and (002) oriented crystallites was identified at the early stages of film growth, which can result in a layer of mixed crystal orientation at the substrate interface, a microstructural feature that is detrimental to TFT performance due to increased charge carrier scattering in back-gated TFT devices. The study revealed that nucleation of both (100) and (101) orientations can be suppressed by increasing the plasma density while decreasing ion energy. After the initial nucleation layer, the microstructure evolves to strongly textured with the (002) crystal plane oriented parallel to the substrate surface. The degree of (002) alignment was pressure-dependent with lower deposition pressures resulting in films with (002) alignment less than 3.3°, a trend attributed to less energy attenuation of the low energy (2- 6 eV) Ar+, O+, and O2+ ions observed with mass spectrometry measurements. At pressures of 7 mTorr and lower, a second population of ionized gas (Ar+, O+, and O2+) species with energies up to 50 eV appeared. The presence of higher energy ions corresponded with a bimodal distribution of ZnO grain sizes, confirming that high energy bombardment has significant implications on microstructural uniformity during large area growth. Based on the established correlations between process parameters, plasma characteristics, film structure and growth mechanisms, optimum deposition conditions for (002) oriented nanocrystalline ZnO synthesis at 150 °C were identified and demonstrated for both silicon oxide wafers of up to 4 inch diameter and on flexible polymer (Kapton) substrates. The feasibility of the low temperature processing of ZnO films for TFT applications was verified by preliminary tests with back-gated device prototypes. Directions of future research are outlined to further develop this low temperature growth method and apply results of this study for ZnO applications in semiconductor devices.
State-of-the-Art Program on Compound Semiconductors XXXVI and Wide Bandgap Semiconductors for Photonic and Electronic Devices and Sensors II
Author: Electrochemical Society. Electronics DivisionPublisher: The Electrochemical Society
ISBN: 9781566773690
Category : Technology & Engineering
Languages : en
Pages : 380
Book Description