Author: Richard W. KaszetaPublisher:
ISBN:
Category :
Languages : en
Pages : 482
Book Description
Experimental Investigation of Transition to Turbulence as Affected by Passing Wakes
Author: Richard W. KaszetaExperimental Investigation of Transition to Turbulence As Affected by Passing Wakes
Author: National Aeronautics and Space Administration (NASA)Publisher: Createspace Independent Publishing Platform
ISBN: 9781721940462
Category :
Languages : en
Pages : 254
Book Description
Experimental results from a study of the effects of passing wakes upon laminar-to-turbulent transition in a low-pressure turbine passage are presented. The test section geometry is designed to simulate the effects of unsteady wakes resulting from rotor-stator interaction upon laminar-to-turbulent transition in turbine blade boundary layers and separated flow regions over suction surfaces. Single-wire, thermal anemometry techniques were used to measure time-resolved and phase-averaged, wall-normal profiles of velocity, turbulence intensity, and intermittency at multiple streamwise locations over the turbine airfoil suction surface. These data are compared to steady state, wake-free data collected in the same geometry to identify the effects of wakes upon laminar-to-turbulent transition. Results are presented for flows with a Reynolds number based on suction surface length and exit velocity of 50,000 and an approach flow turbulence intensity of 2.5 percent. From these data, the effects of passing wakes and associated increased turbulence levels and varying pressure gradients on transition and separation in the near-wall flow are presented. The results show that the wakes affect transition both by virtue of their difference in turbulence level from that of the free-stream but also by virtue of their velocity deficit relative to the freestream velocity, and the concomitant change in angle of attack and temporal pressure gradients. The results of this study seem to support the theory that bypass transition is a response of the near-wall viscous layer to pressure fluctuations imposed upon it from the free-stream flow. The data also show a significant lag between when the wake is present over the surface and when transition begins. The accompanying CD-ROM includes tabulated data, animations, higher resolution plots, and an electronic copy of this report. Kaszeta, Richard W. and Simon, Terrence W. and Ashpis, David (Technical Monitor) Glenn Research Center NCC3-652; RTOP 71
Elements of Transitional Boundary-Layer Flowlements
Author: Robert Edward MaylePublisher: Logos Verlag Berlin GmbH
ISBN: 3832545980
Category : Science
Languages : en
Pages : 418
Book Description
Second Enhanced Edition Suitable for advanced-level courses or an independent study in fluid mechanics, this text by an expert in the field provides the basic aspects of laminar-to-turbulent flow transition in boundary layers. Logically organized into three major parts, the book covers pre- and post-transitional flow, transitional flow, and several advanced topics in periodically disturbed transitional flow. Some of the subjects covered within the book include high-frequency unsteady laminar flow, turbulent flow, natural transition, bypass transition, turbulent spot theory, turbulent spot kinematics and production, correlations for the onset and rate of transition, global and conditional averaging, transitional flow models, wakeinduced transition, multimode transition, and separated-flow transition. Containing some 202 figures (all drawn by the author), 28 tables, 12 appendices, a supplement on tensors, and an extensive bibliography, the 415 page book provides a wealth of data and information about the subject.
Fluid Mechanics for Engineers
Author: Meinhard T. SchobeiriPublisher: Springer Science & Business Media
ISBN: 3642115942
Category : Technology & Engineering
Languages : en
Pages : 517
Book Description
The contents of this book covers the material required in the Fluid Mechanics Graduate Core Course (MEEN-621) and in Advanced Fluid Mechanics, a Ph. D-level elective course (MEEN-622), both of which I have been teaching at Texas A&M University for the past two decades. While there are numerous undergraduate fluid mechanics texts on the market for engineering students and instructors to choose from, there are only limited texts that comprehensively address the particular needs of graduate engineering fluid mechanics courses. To complement the lecture materials, the instructors more often recommend several texts, each of which treats special topics of fluid mechanics. This circumstance and the need to have a textbook that covers the materials needed in the above courses gave the impetus to provide the graduate engineering community with a coherent textbook that comprehensively addresses their needs for an advanced fluid mechanics text. Although this text book is primarily aimed at mechanical engineering students, it is equally suitable for aerospace engineering, civil engineering, other engineering disciplines, and especially those practicing professionals who perform CFD-simulation on a routine basis and would like to know more about the underlying physics of the commercial codes they use. Furthermore, it is suitable for self study, provided that the reader has a sufficient knowledge of calculus and differential equations. In the past, because of the lack of advanced computational capability, the subject of fluid mechanics was artificially subdivided into inviscid, viscous (laminar, turbulent), incompressible, compressible, subsonic, supersonic and hypersonic flows.
Advanced Fluid Mechanics and Heat Transfer for Engineers and Scientists
Author: Meinhard T. SchobeiriPublisher: Springer Nature
ISBN: 3030729257
Category : Technology & Engineering
Languages : en
Pages : 602
Book Description
The current book, Advanced Fluid Mechanics and Heat Transfer is based on author's four decades of industrial and academic research in the area of thermofluid sciences including fluid mechanics, aero-thermodynamics, heat transfer and their applications to engineering systems. Fluid mechanics and heat transfer are inextricably intertwined and both are two integral parts of one physical discipline. No problem from fluid mechanics that requires the calculation of the temperature can be solved using the system of Navier-Stokes and continuity equations only. Conversely, no heat transfer problem can be solved using the energy equation only without using the Navier-Stokes and continuity equations. The fact that there is no book treating this physical discipline as a unified subject in a single book that considers the need of the engineering and physics community, motivated the author to write this book. It is primarily aimed at students of engineering, physics and those practicing professionals who perform aero-thermo-heat transfer design tasks in the industry and would like to deepen their knowledge in this area. The contents of this new book covers the material required in Fluid Mechanics and Heat Transfer Graduate Core Courses in the US universities. It also covers the major parts of the Ph.D-level elective courses Advanced Fluid Mechanics and Heat Transfer that the author has been teaching at Texas A&M University for the past three decades.
03-3487 - 03-3656
Author: Journal of Thermophysics and Heat Transfer
Author: Publisher:
ISBN:
Category : Heat
Languages : en
Pages : 1238
Book Description
This journal is devoted to the advancement of the science and technology of thermophysics and heat transfer through the dissemination of original research papers disclosing new technical knowledge and exploratory developments and applications based on new knowledge. It publishes papers that deal with the properties and mechanisms involved in thermal energy transfer and storage in gases, liquids, and solids or combinations thereof. These studies include conductive, convective, and radiative modes alone or in combination and the effects of the environment.
AIAA Aerospace Sciences Meeting and Exhibit, 42nd
Author: Unsteady Fluid Mechanics and Heat Transfer in Low Pressure Turbines and Stirling Engines
Author: Nan JiangProceedings of the ASME Turbo Expo 2002 Presented at the 2002 ASME Turbo Expo, June 3-6, 2002, Amsterdam, the Netherlands
Author: Publisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 726
Book Description
Annotation This is Volume 1 of five volumes that comprise the proceedings of the June 2002 conference, sponsored by the International Gas Turbine Institute (IGTI), a technical institute of the American Society of Mechanical Engineers. The purpose of the conference was to facilitate international exchange and development of educational and technical information related to the design, application, manufacture, operation, maintenance, and environmental impact of all types of gas engines. With an emphasis upon the need for more efficient, cleaner, and more reliable gas turbines, the approximately 130 articles cover various technical aspects of aircraft engines; coal, biomass, and alternative fuels; combustion and fuels; education; electric power; and vehicular and small turbomachines. There is no subject index. Annotation c. Book News, Inc., Portland, OR (booknews.com).