Experimental Investigation of Hydraulic Fracturing Fluid on Shale and Soil PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Experimental Investigation of Hydraulic Fracturing Fluid on Shale and Soil PDF full book. Access full book title Experimental Investigation of Hydraulic Fracturing Fluid on Shale and Soil by Zhenning Yang. Download full books in PDF and EPUB format.
Author: Zhenning Yang Publisher: ISBN: Category : Languages : en Pages :
Book Description
Mitigation and prevention of shale-formation damage caused by hydraulic-fracturing fluid/rock interactions play an important role in well-production stability and subsequent refracturing design. This study presents three experimental investigations on the interaction of water/shale, fluid/clay, and fluid/shale. A series of experiments were designed to investigate fluid/shale interactions: hydrophilic to hydrophobic alteration through chemical-vapor deposition, nanoindentation testing on shale sample, geotechnical laboratory experiments on contaminated clay, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and scanning electron microscope (SEM) on shale sample. A clay-matrix-based data-screening criterion is proposed for nanoindentation. The continuous-stiffness-measurment (CSM) method is proved to have better definition and characterization of softening of shale based on the proposed criterion. This study furthered the numerical model of clay deformation by Hattab and Chang (2015) by considering different pore fluid concentration. The fracturing fluid contaminated clay produced changes of geotechnical properties. Based on the proposed criterion and designed experiments, fracturing fluid contaminated shale was observed to gain 4 to 6% of NaCl. However, all other minerals contents are found to decrease after the shale powder-fluid interaction. A characteristic depth was proposed to consider reduction of hardness and mineral content at the same time. Moreover, an empirical equation was proposed to describe fracture toughness of shale by using a selection of indentation depth, its corresponding hardness and Young's modulus.
Author: Zhenning Yang Publisher: ISBN: Category : Languages : en Pages :
Book Description
Mitigation and prevention of shale-formation damage caused by hydraulic-fracturing fluid/rock interactions play an important role in well-production stability and subsequent refracturing design. This study presents three experimental investigations on the interaction of water/shale, fluid/clay, and fluid/shale. A series of experiments were designed to investigate fluid/shale interactions: hydrophilic to hydrophobic alteration through chemical-vapor deposition, nanoindentation testing on shale sample, geotechnical laboratory experiments on contaminated clay, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and scanning electron microscope (SEM) on shale sample. A clay-matrix-based data-screening criterion is proposed for nanoindentation. The continuous-stiffness-measurment (CSM) method is proved to have better definition and characterization of softening of shale based on the proposed criterion. This study furthered the numerical model of clay deformation by Hattab and Chang (2015) by considering different pore fluid concentration. The fracturing fluid contaminated clay produced changes of geotechnical properties. Based on the proposed criterion and designed experiments, fracturing fluid contaminated shale was observed to gain 4 to 6% of NaCl. However, all other minerals contents are found to decrease after the shale powder-fluid interaction. A characteristic depth was proposed to consider reduction of hardness and mineral content at the same time. Moreover, an empirical equation was proposed to describe fracture toughness of shale by using a selection of indentation depth, its corresponding hardness and Young's modulus.
Author: Jihad Najib Bu-Ghanim Publisher: ISBN: Category : Clay Languages : en Pages : 1120
Book Description
Hydraulic fracturing has been realized to cause excessive leakage in earth dams which could eventually lead to catastrophic failure .Hydraulic fracturing seems to occur when the effective stresses become tensile and equal to the tensile strength of the soil . An experimental investigation on the hydraulic fracturing of a silty clay is conducted. The silty clay is characterized in terms of its strength parameters using traditional triaxial testing and a newly developed split tension test whereby the strength under a combination of tensile and compressive stresses could be determined. Perme-ability of the silty clay is also determined by means of a constant head permeability test. Hydraulic fracturing behavior is investigated for different states of stress and compaction variables. The hydraulic fracturing test is conducted on cylindrical specimens compacted with cylindrical hole of small diameter along their axes. A perforated brass tube is introduced in the central cavity and water is introduced at a given rate of flow . Hydraulic fracturing occurs when the water pressure in the hole drops for a given rate of flow. Results of hydraulic fracturing tests indicate that the water pressure required to induce hydraulic fracturing is significantly influenced by the state of applied stresses on the specimen, the compaction variables and the rate of water flow. The dimensions of the cracks induced by hydraulic fracturing initiate along a vertical plane at the boundary of the tube could propagate vertically, and horizontally along interface between compaction layers. Empirical correlations are established between applied stresses and hydraulic fracturing pressure .Experimental results are also compared with analytical predictions using the Mohr-Coulomb failure criterion, Haimson's model, and a model based on Massarsch plastic cavity expansion theory . Results of these comparisons show that none of these models could predict the hydraulic fracturing behavior for all test variables used. However, each model seems to fit a certain set of data depending on applied stresses and compaction variables . The Moher-Coulomb model seems to apply for specimens compacted wet of optimum using modified and standard AASHTO energy whereas Haimson model applies mostly for specimens compacted dry and at optimum moisture contents. Massarsch, on the other hand, does not seem to fit experimental results obtained.
Author: Yu Wang Publisher: Scientific Research Publishing, Inc. USA ISBN: 1618968963 Category : Art Languages : en Pages : 383
Book Description
This book is intended as a reference book for advanced graduate students and research engineers in shale gas development or rock mechanical engineering. Globally, there is widespread interest in exploiting shale gas resources to meet rising energy demands, maintain energy security and stability in supply and reduce dependence on higher carbon sources of energy, namely coal and oil. However, extracting shale gas is a resource intensive process and is dependent on the geological and geomechanical characteristics of the source rocks, making the development of certain formations uneconomic using current technologies. Therefore, evaluation of the physical and mechanical properties of shale, together with technological advancements, is critical in verifying the economic viability of such formation. Accurate geomechanical information about the rock and its variation through the shale is important since stresses along the wellbore can control fracture initiation and frac development. In addition, hydraulic fracturing has been widely employed to enhance the production of oil and gas from underground reservoirs. Hydraulic fracturing is a complex operation in which the fluid is pumped at a high pressure into a selected section of the wellbore. The interaction between the hydraulic fractures and natural fractures is the key to fracturing effectiveness prediction and high gas development. The development and growth of a hydraulic fracture through the natural fracture systems of shale is probably more complex than can be described here, but may be somewhat predictable if the fracture system and the development of stresses can be explained. As a result, comprehensive shale geomechanical experiments, physical modeling experiment and numerical investigations should be conducted to reveal the fracturing mechanical behaviors of shale.
Author: Emad Abbad Alabbad Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
Understanding the mechanisms that govern hydraulic fracturing applications in unconventional formations, such as gas-bearing shales, is of increasing interest to the petroleum upstream industry. Among such mechanisms, the geomechanical interactions between hydraulic fractures and pre-existing fractures on one hand, and simultaneous multiple hydraulic fractures on the other hand are seen of high importance. Although the petroleum engineering and related literature contains a number of studies that discusses such topics of hydraulic fracture interactions, there still remain some aspects that require answers, validations, or further supporting data. Particularly, experimental evidence is fairly scarce and keenly needed to solidify the understanding of such complex applications. In this work, the investigation methodology uses a series of hydraulic fracturing laboratory tests performed on synthetic rocks made of gypsum-based cements such as hydrostone and plaster in various experimental set ups. Those laboratory tests aim to closely investigate hydraulic fracture intersection with pre-existing fractures by assessing some factors that govern its outcomes. Specifically, the roles of the pre-existing fracture cementation, aperture, and relative height on the intersection mode are examined. The results show dominant effect of the cement-fill type relative to the host-rock matrix in determining whether hydraulic fracture crossing the pre-existing interface may occur. Similarly, hydraulic fracture height relative to the height of the pre-existing fracture may dictate the intersection results. However, the intersection mode seems to be insensitive of the pre-existing fracture aperture. Moreover, simultaneous multi-fracture propagation is examined and found to be impacted by the interference of the stresses induced from each fracturing source on neighboring fracturing sources. Such stress interference increases as the number of the propagating hydraulic fractures increase. While hydraulic fractures initiating from fracturing sources located in the middle of the fracturing stage seem to have inhibited propagation, outer hydraulic fractures may continue propagating with outward curvatures. Overall, the experimental results and analyses offer more insights for understanding hydraulic fracture complexity in unconventional formations.
Author: Xin-rong Zhang Publisher: John Wiley & Sons ISBN: 111974234X Category : Technology & Engineering Languages : en Pages : 291
Book Description
Mechanics of Hydraulic Fracturing Comprehensive single-volume reference work providing an overview of experimental results and predictive methods for hydraulic fracture growth in rocks Mechanics of Hydraulic Fracturing: Experiment, Model, and Monitoring provides a summary of the research in mechanics of hydraulic fractures during the past two decades, plus new research trends to look for in the future. The book covers the contributions from theory, modeling, and experimentation, including the application of models to reservoir stimulation, mining preconditioning, and the formation of geological structures. The four expert editors emphasize the variety of diverse methods and tools in hydraulic fracturing and help the reader understand hydraulic fracture mechanics in complex geological situations. To aid in reader comprehension, practical examples of new approaches and methods are presented throughout the book. Key topics covered in the book include: Prediction of fracture shapes, sizes, and distributions in sedimentary basins, plus their importance in petroleum industry Real-time monitoring methods, such as micro-seismicity and trace tracking How to uncover geometries of fractures like dikes and veins Fracture growth of individual foundations and its applications Researchers and professionals working in the field of fluid-driven fracture growth will find immense value in this comprehensive reference on hydraulic fracturing mechanics.
Author: United States. Congress. House. Committee on Science, Space, and Technology (2011) Publisher: ISBN: Category : Business & Economics Languages : en Pages : 160
Author: Zhenning Yang
Author: Zhenning Yang
Author: Qiyan Yan
Author: Jihad Najib Bu-Ghanim
Author: Roy E. Leach
Author: Yu Wang
Author: 
Author: Nabe Konate
Author: Emad Abbad Alabbad
Author: Xin-rong Zhang
Author: United States. Congress. House. Committee on Science, Space, and Technology (2011)