Author: Constantine D. Rakopoulos
Publisher: Springer Science & Business Media
ISBN: 1848823754
Category : Technology & Engineering
Languages : en
Pages : 408
Book Description
Traditionally, the study of internal combustion engines operation has focused on the steady-state performance. However, the daily driving schedule of automotive and truck engines is inherently related to unsteady conditions. In fact, only a very small portion of a vehicle’s operating pattern is true steady-state, e. g. , when cruising on a motorway. Moreover, the most critical conditions encountered by industrial or marine engines are met during transients too. Unfortunately, the transient operation of turbocharged diesel engines has been associated with slow acceleration rate, hence poor driveability, and overshoot in particulate, gaseous and noise emissions. Despite the relatively large number of published papers, this very important subject has been treated in the past scarcely and only segmentally as regards reference books. Merely two chapters, one in the book Turbocharging the Internal Combustion Engine by N. Watson and M. S. Janota (McMillan Press, 1982) and another one written by D. E. Winterbone in the book The Thermodynamics and Gas Dynamics of Internal Combustion Engines, Vol. II edited by J. H. Horlock and D. E. Winterbone (Clarendon Press, 1986) are dedicated to transient operation. Both books, now out of print, were published a long time ago. Then, it seems reasonable to try to expand on these pioneering works, taking into account the recent technological advances and particularly the global concern about environmental pollution, which has intensified the research on transient (diesel) engine operation, typically through the Transient Cycles certification of new vehicles.
Diesel Engine Transient Operation
Author: Constantine D. Rakopoulos
Publisher: Springer Science & Business Media
ISBN: 1848823754
Category : Technology & Engineering
Languages : en
Pages : 408
Book Description
Traditionally, the study of internal combustion engines operation has focused on the steady-state performance. However, the daily driving schedule of automotive and truck engines is inherently related to unsteady conditions. In fact, only a very small portion of a vehicle’s operating pattern is true steady-state, e. g. , when cruising on a motorway. Moreover, the most critical conditions encountered by industrial or marine engines are met during transients too. Unfortunately, the transient operation of turbocharged diesel engines has been associated with slow acceleration rate, hence poor driveability, and overshoot in particulate, gaseous and noise emissions. Despite the relatively large number of published papers, this very important subject has been treated in the past scarcely and only segmentally as regards reference books. Merely two chapters, one in the book Turbocharging the Internal Combustion Engine by N. Watson and M. S. Janota (McMillan Press, 1982) and another one written by D. E. Winterbone in the book The Thermodynamics and Gas Dynamics of Internal Combustion Engines, Vol. II edited by J. H. Horlock and D. E. Winterbone (Clarendon Press, 1986) are dedicated to transient operation. Both books, now out of print, were published a long time ago. Then, it seems reasonable to try to expand on these pioneering works, taking into account the recent technological advances and particularly the global concern about environmental pollution, which has intensified the research on transient (diesel) engine operation, typically through the Transient Cycles certification of new vehicles.
Publisher: Springer Science & Business Media
ISBN: 1848823754
Category : Technology & Engineering
Languages : en
Pages : 408
Book Description
Traditionally, the study of internal combustion engines operation has focused on the steady-state performance. However, the daily driving schedule of automotive and truck engines is inherently related to unsteady conditions. In fact, only a very small portion of a vehicle’s operating pattern is true steady-state, e. g. , when cruising on a motorway. Moreover, the most critical conditions encountered by industrial or marine engines are met during transients too. Unfortunately, the transient operation of turbocharged diesel engines has been associated with slow acceleration rate, hence poor driveability, and overshoot in particulate, gaseous and noise emissions. Despite the relatively large number of published papers, this very important subject has been treated in the past scarcely and only segmentally as regards reference books. Merely two chapters, one in the book Turbocharging the Internal Combustion Engine by N. Watson and M. S. Janota (McMillan Press, 1982) and another one written by D. E. Winterbone in the book The Thermodynamics and Gas Dynamics of Internal Combustion Engines, Vol. II edited by J. H. Horlock and D. E. Winterbone (Clarendon Press, 1986) are dedicated to transient operation. Both books, now out of print, were published a long time ago. Then, it seems reasonable to try to expand on these pioneering works, taking into account the recent technological advances and particularly the global concern about environmental pollution, which has intensified the research on transient (diesel) engine operation, typically through the Transient Cycles certification of new vehicles.
ASME Technical Papers
Author:
Publisher:
ISBN:
Category : Mechanical engineering
Languages : en
Pages : 554
Book Description
Publisher:
ISBN:
Category : Mechanical engineering
Languages : en
Pages : 554
Book Description
11th International Conference on Turbochargers and Turbocharging
Author: IMechE
Publisher: Elsevier
ISBN: 0081000340
Category : Technology & Engineering
Languages : en
Pages : 497
Book Description
The future market forces and environmental considerations in the passenger car and commercial vehicle sector mean more stringent engine downsizing is far more prevalent. Therefore, novel systems are required to provide boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems for high efficiency, response, reliability, durability and compactness. The current emission legislations and environmental trends for reducing CO2 and fuel consumption are the major market forces in the land and marine transport industries. The internal combustion engine is the key product and downsizing, efficiency and economy are the driving forces for development for both spark ignition (SI) and compression ignition (CI) engines in both markets. Future market forces and environmental considerations for transportation, specifically in the passenger car, commercial vehicle and the marine sectors mean more stringent engine downsizing. This international conference is the latest in the highly successful and prestigious series held regularly since 1978. These proceedings from the Institution's highly successful and prestigious series address current and novel aspects of turbocharging systems design, boosting solutions for engine downsizing and improvements in efficiency, and present the latest research and development in this growing and innovative area. - Focuses on boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems - Explores the current need for high efficiency, reliability, durability and compactness in recovery systems - Examines what new systems developments are underway
Publisher: Elsevier
ISBN: 0081000340
Category : Technology & Engineering
Languages : en
Pages : 497
Book Description
The future market forces and environmental considerations in the passenger car and commercial vehicle sector mean more stringent engine downsizing is far more prevalent. Therefore, novel systems are required to provide boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems for high efficiency, response, reliability, durability and compactness. The current emission legislations and environmental trends for reducing CO2 and fuel consumption are the major market forces in the land and marine transport industries. The internal combustion engine is the key product and downsizing, efficiency and economy are the driving forces for development for both spark ignition (SI) and compression ignition (CI) engines in both markets. Future market forces and environmental considerations for transportation, specifically in the passenger car, commercial vehicle and the marine sectors mean more stringent engine downsizing. This international conference is the latest in the highly successful and prestigious series held regularly since 1978. These proceedings from the Institution's highly successful and prestigious series address current and novel aspects of turbocharging systems design, boosting solutions for engine downsizing and improvements in efficiency, and present the latest research and development in this growing and innovative area. - Focuses on boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems - Explores the current need for high efficiency, reliability, durability and compactness in recovery systems - Examines what new systems developments are underway
Paper
Author:
Publisher:
ISBN:
Category : Mechanical engineering
Languages : en
Pages : 590
Book Description
Publisher:
ISBN:
Category : Mechanical engineering
Languages : en
Pages : 590
Book Description
Scientific and Technical Aerospace Reports
Annual Index/abstracts of SAE Technical Papers
Masters Theses in the Pure and Applied Sciences
Author: Wade H. Shafer
Publisher: Springer Science & Business Media
ISBN: 1475757794
Category : Science
Languages : en
Pages : 307
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis· seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) *at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac· tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 20 (thesis year 1975) a total of 10,374 theses titles from 28 Canadian and 239 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. The organization of Volume 20 is identical to that of past years. It consists of theses titles arranged by discipline and by university within each discipline.
Publisher: Springer Science & Business Media
ISBN: 1475757794
Category : Science
Languages : en
Pages : 307
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis· seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) *at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac· tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 20 (thesis year 1975) a total of 10,374 theses titles from 28 Canadian and 239 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. The organization of Volume 20 is identical to that of past years. It consists of theses titles arranged by discipline and by university within each discipline.
Combustion and flow diagnostics
Proceedings of the 2001 Fall Technical Conference of the ASME Internal Combustion Engine Division
Author: American Society of Mechanical Engineers. Internal Combustion Engine Division. Technical Conference
Publisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 198
Book Description
Publisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 198
Book Description
Cumulative Index [of The] SAE Papers
Author: Society of Automotive Engineers
Publisher:
ISBN:
Category : Engineering
Languages : en
Pages : 1508
Book Description
Publisher:
ISBN:
Category : Engineering
Languages : en
Pages : 1508
Book Description