Evaluation of Warm Mix Asphalt Mixtures Containing RAP Using Accelerated Loading Tests PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Evaluation of Warm Mix Asphalt Mixtures Containing RAP Using Accelerated Loading Tests PDF full book. Access full book title Evaluation of Warm Mix Asphalt Mixtures Containing RAP Using Accelerated Loading Tests by Munir D. Nazzal. Download full books in PDF and EPUB format.
Author: Munir D. Nazzal Publisher: ISBN: Category : Accelerated loading tests Languages : en Pages : 8
Book Description
This paper presents the results of a study that was conducted to evaluate the performance and constructability of warm mix asphalt (WMA) mixtures containing reclaimed asphalt pavement (RAP). Four sections were constructed at the indoor Accelerated Pavement Loading Facility at Ohio University. Aspha-min, Sasobit, and Evotherm WMA mixtures were used in the wearing course layer of the first three sections. In addition, the fourth section had a conventional hot mix asphalt (HMA) mixture, which was used as a control. Temperature was monitored during the production, placement, and compaction of WMA and HMA mixtures. Furthermore, emission tests were conducted at the asphalt plants during the production of each of the evaluated mixtures. Falling weight deflectometer (FWD) and rolling wheel tests were conducted at different temperatures on all evaluated sections. The results of this study showed that emissions were reduced during the production of the Aspha-min and Sasobit WMA mixtures by at least 50 % for volatile organic compounds, 60 % for carbon monoxide, 20 % for nitrogen oxides, and 83 % for sulfur dioxide, when compared to the control HMA mixture. In addition, although WMA mixtures were produced and compacted at much lower temperatures, they achieved better field densities than the control HMA mixture. The FWD test results showed that at 40°F (4°C) test temperature, the control HMA mixture had significantly lower stiffness than that of the WMA mixtures. However, the FWD stiffness measurement of the HMA and the WMA mixtures were statistically indistinguishable at the intermediate and high test temperatures of 70°F (21.1°C) and 104°F (40°C), respectively. Finally, the rolling wheel test results indicated that the three WMA sections, especially the Evotherm section, exhibited more rutting than the control HMA section during the post primary compaction stage. However, the rutting rate of the HMA section was higher than those of the WMA sections in the secondary stage, which suggests that the rutting difference may slowly be mitigated.
Author: Munir D. Nazzal Publisher: ISBN: Category : Accelerated loading tests Languages : en Pages : 8
Book Description
This paper presents the results of a study that was conducted to evaluate the performance and constructability of warm mix asphalt (WMA) mixtures containing reclaimed asphalt pavement (RAP). Four sections were constructed at the indoor Accelerated Pavement Loading Facility at Ohio University. Aspha-min, Sasobit, and Evotherm WMA mixtures were used in the wearing course layer of the first three sections. In addition, the fourth section had a conventional hot mix asphalt (HMA) mixture, which was used as a control. Temperature was monitored during the production, placement, and compaction of WMA and HMA mixtures. Furthermore, emission tests were conducted at the asphalt plants during the production of each of the evaluated mixtures. Falling weight deflectometer (FWD) and rolling wheel tests were conducted at different temperatures on all evaluated sections. The results of this study showed that emissions were reduced during the production of the Aspha-min and Sasobit WMA mixtures by at least 50 % for volatile organic compounds, 60 % for carbon monoxide, 20 % for nitrogen oxides, and 83 % for sulfur dioxide, when compared to the control HMA mixture. In addition, although WMA mixtures were produced and compacted at much lower temperatures, they achieved better field densities than the control HMA mixture. The FWD test results showed that at 40°F (4°C) test temperature, the control HMA mixture had significantly lower stiffness than that of the WMA mixtures. However, the FWD stiffness measurement of the HMA and the WMA mixtures were statistically indistinguishable at the intermediate and high test temperatures of 70°F (21.1°C) and 104°F (40°C), respectively. Finally, the rolling wheel test results indicated that the three WMA sections, especially the Evotherm section, exhibited more rutting than the control HMA section during the post primary compaction stage. However, the rutting rate of the HMA section was higher than those of the WMA sections in the secondary stage, which suggests that the rutting difference may slowly be mitigated.
Author: Randy Clark West Publisher: Transportation Research Board ISBN: 0309259134 Category : Pavements, Asphalt Languages : en Pages : 162
Book Description
TRB's National Cooperative Highway Research Program (NCHRP) Report 752: Improved Mix Design, Evaluation, and Materials Management Practices for Hot Mix Asphalt with High Reclaimed Asphalt Pavement Content describes proposed revisions to the American Association of State Highway and Transportation Officials (AASHTO) R 35, Superpave Volumetric Design for Hot Mix Asphalt, and AASHTO M 323, Superpave Volumetric Mix Design, to accommodate the design of asphalt mixtures with high reclaimed asphalt pavement contents.
Author: Brian Hill Publisher: ISBN: Category : Languages : en Pages :
Book Description
Sustainability is a cornerstone of today0́9s engineering world. Warm mix asphalt (WMA) and reclaimed asphalt pavement (RAP) are the most prominent sustainable materials in asphalt concrete pavements. WMA is a not a new concept, however new innovations and increased usage of WMA has been spurred by the increased focus on sustainable infrastructure systems. WMA enables reduced production temperatures through the use of wax, water, or other chemical packages. The effects of reduced production temperatures include fuel use and emissions reductions, improved compaction, and possible RAP concentration increases. RAP is the primary recycled product of the aged asphalt concrete pavements and its use leads to reductions in virgin aggregate and asphalt demand. However, significant performance issues can stem from the individual integration of WMA or RAP materials in asphalt concrete. In particular, WMA technologies can increase moisture and rutting susceptibility while RAP significantly increases the stiffness of the resulting mixture. Consequently, quality performance of sustainable asphalt pavements may require the combined use of WMA and RAP to produce mixtures with sufficient stiffness and moisture and fracture resistance. This study evaluates the potential of WMA technologies and their integration with RAP. Initially, an extensive literature review was completed to understand the advantages, disadvantages, and past field and lab performance of WMA and RAP mixtures. Rotational viscometer and bending beam rheometer tests were then used to evaluate Sasobit, Evotherm M1, and Advera WMA modified and unmodified binders. Finally, virgin and 45% RAP mixtures were designed and tested to examine the rutting, moisture, and fracture resistance of WMA and HMA mixtures. The results of this experiment provided several key observations. First, viscosity reductions may not be the primary cause for the availability of reduced production temperatures for WMA technologies. Second, WMA additive properties have a significant effect upon fracture, moisture, and rutting resistance. Furthermore, the addition of RAP to WMA mixtures improved the rutting and moisture sensitivity performance as characterized in the Hamburg and Tensile Strength Ratio testing procedures.
Author: Emily Dawn Shrum Publisher: ISBN: Category : Languages : en Pages : 79
Book Description
Warm mix asphalt (WMA) has been used worldwide for many years, primarily in Europe. The National Asphalt Pavement Association first brought WMA to the United States in 2002. By using warm mix technology, the temperature of an asphalt mixture during production, transportation, and compaction decreases dramatically. Several concerns about WMA arise due to the reduced mixing temperature. One of the primary concerns in asphalt pavement is the moisture damage. The lower mixing temperature may not be high enough to vaporize all the moisture absorbed in the aggregate, and part of the moisture may be entrapped in the pavements during compaction. This thesis presents a laboratory study to evaluate the moisture susceptibility of warm mix asphalt (WMA) produced through plant foaming procedure. Two types of mixtures were evaluated. A base mixture meeting the state of Tennessee "BM-2" mix criteria was evaluated at 0, 30, 40, and 50 percent fractionated recycled asphalt pavement (RAP), and a surface mixture meeting the state of Tennessee "411-D" mix criteria was evaluated at 15, 20, 30, 40 percent fractionated RAP. WMA mixture specimens were obtained and compacted at the asphalt plant. The WMA specimens were compared to hot-mix asphalt (HMA) specimens through a set of laboratory mixture performance tests. In addition to traditional AASHTO T283 freeze and thaw (F-T) tensile strength ratio (TSR), Superpave indirect tensile test (IDT) with F-T and MIST conditioning, and Asphalt Pavement Analyzer (APA) Hamburg wheel tracking tests were utilized to evaluate asphalt mixtures. Moisture tests indicated that with the higher inclusions of RAP, specimens exhibited lower rut depths and higher tensile strength retention. Tensile strength ratio tests indicated that HMA specimens had higher tensile strength retention when freeze thaw conditioned. Dynamic modulus conditioned specimens indicated that simple performance tests can show the difference between conditioned and unconditioned specimens. HMA specimens showed lower susceptibility to moisture compared to WMA specimens for both BM-2 and 411-D mixtures. The higher percentages of RAP in WMA and HMA in both BM-2 and 411-D mixtures showed a reduction to moisture susceptibility.
Author: Sherif El-Badawy Publisher: Springer ISBN: 303001908X Category : Science Languages : en Pages : 205
Book Description
This volume includes a collection of research and practical papers from an international research and technology activities on recent developments in pavement design, modeling and performance, and effects on infrastructure, green energy, technology and integration. Sustainability is increasingly a key priority in engineering practices. With the aging transportation infrastructure and renewed emphasis on infrastructure renovation by transportation agencies, innovations are urgently needed to develop materials, designs, and practices to ensure the sustainability of transportation infrastructure. The volume is based on the best contributions to the 2nd GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2018 – The official international congress of the Soil-Structure Interaction Group in Egypt (SSIGE).
Author: Jesse David Doyle Publisher: ISBN: Category : Asphalt Languages : en Pages :
Book Description
Reclaimed asphalt pavement (RAP) is a valuable resource that can be recycled into new asphalt mixtures. In recent years, the continued rise of raw material costs has generated considerable interest in increasing RAP usage. Warm mix asphalt (WMA) is a modern development in the asphalt industry that can potentially help increase RAP usage and achieve adequate mixture performance. The purpose of this dissertation is to: 1) develop a method to characterize the absorbed, inert and effective bituminous components in RAP; and 2) evaluate performance of high RAP-WMA mixtures for various pavement applications including airfield surfaces, highway surfaces and highway bases. A unique approach was taken to characterize RAP properties that coupled a dataset of 568 asphalt mix designs spanning five years of practice and testing 100% RAP with added virgin binder; 394 compacted specimens and 68 loose specimens were tested. A method to predict RAP absorbed asphalt was developed and shown to yield more reasonable results than conventional methods which were shown very likely to give incorrect absorbed asphalt contents in some conditions. The relative effectiveness of RAP surface asphalt was evaluated and estimates of inert and effective RAP asphalt were made for a variety of temperature, compactive effort, and warm mix additive conditions. Results showed different behaviors between RAP sources and between hot and warm mix temperatures. These results were also observed in volumetrics of high RAP mixtures. Performance evaluation was based on testing 75 slab specimens and more than 1100 gyratory specimens. Test data indicated a potential for decreased durability as RAP content increases; however 25% RAP highway surface mixtures and 50% RAP base mixtures had similar performance to current practice. Low temperature mixture stiffness testing and thermal cracking analysis indicated slightly increased stiffness with high RAP and 25% RAP highway surface mixtures that had comparable performance to current practice. Dry rut testing indicated high RAP mixtures are rut resistant. Moisture damage testing of high RAP mixtures indicated passing results in tensile strength ratio testing but potential for moisture damage in loaded wheel tracking. Overall, 25% RAP highway surface mixtures are recommended for immediate implementation.
Author: Ramon Francis Bonaquist Publisher: Transportation Research Board ISBN: 0309155592 Category : Science Languages : en Pages : 111
Book Description
TRB's National Cooperative Highway Research Program (NCHRP) Report 691: Mix Design Practices for Warm-Mix Asphalt explores a mix design method tailored to the unique material properties of warm mix asphalt technologies. Warm mix asphalt (WMA) refers to asphalt concrete mixtures that are produced at temperatures approximately 50°F (28°C) or more cooler than typically used in the production of hot mix asphalt (HMA). The goal of WMA is to produce mixtures with similar strength, durability, and performance characteristics as HMA using substantially reduced production temperatures. There are important environmental and health benefits associated with reduced production temperatures including lower greenhouse gas emissions, lower fuel consumption, and reduced exposure of workers to asphalt fumes. Lower production temperatures can also potentially improve pavement performance by reducing binder aging, providing added time for mixture compaction, and allowing improved compaction during cold weather paving. Appendices to NCHRP Report 691 include the following. Appendices A, B, and D are included in the printed and PDF version of the report. Appendices C and E are available only online.
Author: Munir D. Nazzal
Author: Munir D. Nazzal
Author: Randy Clark West
Author: Brian Hill
Author: 
Author: Emily Dawn Shrum
Author: 
Author: Sherif El-Badawy
Author: Jesse David Doyle
Author: Louay Nadhim Mohammad
Author: Ramon Francis Bonaquist