Evaluation of Three-piece AM2 Aluminum Landing Mat PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Evaluation of Three-piece AM2 Aluminum Landing Mat PDF full book. Access full book title Evaluation of Three-piece AM2 Aluminum Landing Mat by William N. Brabston. Download full books in PDF and EPUB format.
Author: William N. Brabston Publisher: ISBN: Category : Landing mats Languages : en Pages : 90
Book Description
The investigation was conducted to evaluate three-piece AM2 landing mat. The mat was fabricated from three 8-in.-wide extrusions welded together to form a 2-ft-wide plank. A test section consisting of one sand item and three clay subgrade items with various CBR strength values was constructed and surfaced with the three-piece mat. The test section was subjected to uniform-coverage and single-line traffic representing operations of an aircraft having a 60,000-lb gross weight with a single-wheel main gear assembly load of 27,000 lb with a 30.7.7 tire inflated to 400 psi. (Author).
Author: William N. Brabston Publisher: ISBN: Category : Landing mats Languages : en Pages : 90
Book Description
The investigation was conducted to evaluate three-piece AM2 landing mat. The mat was fabricated from three 8-in.-wide extrusions welded together to form a 2-ft-wide plank. A test section consisting of one sand item and three clay subgrade items with various CBR strength values was constructed and surfaced with the three-piece mat. The test section was subjected to uniform-coverage and single-line traffic representing operations of an aircraft having a 60,000-lb gross weight with a single-wheel main gear assembly load of 27,000 lb with a 30.7.7 tire inflated to 400 psi. (Author).
Author: Cecil D. Burns Publisher: ISBN: Category : Landing mats Languages : en Pages : 74
Book Description
The object of the investigation is to evaluate the performance of the Harvey two-piece AM-2 landing mat under accelerated traffic tests. (Author).
Author: William B. Fenwick Publisher: ISBN: Category : Landing mats Languages : en Pages : 84
Book Description
This investigation was conducted to determine the optimum panel size for the AM2 mat fabricated by Harvey Aluminum Company, Torrance, Calif. The basic AM2 mat was designed to sustain 1600 operational cycles of an aircraft having a gross weight of 60,000 lb with a single-wheel main-gear-assembly load of 27,000 lb and a 30-7.7 tire inflated to 400 psi. A test section consisting of three items with different subgrade strengths and surfaced with three different size mat panels was constructed and subjected to 188 coverages (equivalent to 1600 cycles of aircraft operations) of accelerated traffic of a 27,000-lb single-wheel load with a 30-7.7 tire inflated to 400 pri. The mat was also tested for its ability to sustain 1600 passes of a 39,000-lb single-wheel load applied in a single track to represent the calculated loading that would be imposed on a landing mat during launching of a 60,000-lb aircraft by catapult.
Author: William B. Fenwick Publisher: ISBN: Category : Landing mats Languages : en Pages : 66
Book Description
The objectives of the investigation reported herein were to: (a) Evaluate the performance of the Washington AM2 mat under accelerated traffic tests with the wheel loadings contemplated under the SATS concept. (b) Compare the performance of the Washington mat with that of the original experimental AM2 mat designed and fabricated by Harvey. (c) Compare the quality of the extrusions furnished to Washington by Alcoa and Dow Chemical Co.
Author: William B. Fenwick Publisher: ISBN: Category : Landing mats Languages : en Pages : 66
Book Description
The study was conducted to compare the performance of aluminum landing mat fabricated by Butler Manufacturing Co. The primary method of comparison was by using CBR design curves which were developed to represent 1600 operational cycles of an aircraft having a 60,000-lb gross weight with a single-wheel, main-gear assembly load of 27,000 lb and a 30-7.7 tire inflated to 400 psi. CBR design curves were also developed for 1600 passes of a 39,000-lb single-wheel load applied in a single track to represent the calculated loading imposed on the landing mat during launching of the 60,000-lb aircraft by catapult. (Author).
Author: Cecil D. Burns Publisher: ISBN: Category : Landing mats Languages : en Pages : 47
Book Description
The investigation was conducted to evaluate the performance of the 1- and 2-ft-wide Harvey nonwelded aluminum landing mats and to compare the performance with that obtained in previous tests on standard AM2 mat. This landing mat was extruded by the Harvey Aluminum Co., Torrance, Calif. Three test sections were built and surfaced with different shipments or types of Harvey mat. The first and second sections were surfaced with 1- by 6-ft and 2- by 6-ft mat, respectively, each over two clay subgrade items with different CBR strength values. The third section consisted of two items surfaced with 2- by 12-ft and modified 2- by 12-ft mat over a subgrade of the same nominal strength as the lower subgrade strength of the first and second sections. All three test sections were subjected to uniform-coverage traffic, and section one was also subjected to single-line traffic. The traffic represented operations of an aircraft having a 60,000-lb gross weight with a single-wheel main-gear assembly load of 27,000 lb with a 30-7.7 tire inflated to 400 psi. (Author).
Author: William N. Brabston
Author: William N. Brabston
Author: Cecil D. Burns
Author: Cecil D. Burns
Author: William B. Fenwick
Author: William B. Fenwick
Author: Yu-Tang Chou
Author: William B. Fenwick
Author: U.S. Army Engineer Waterways Experiment Station
Author: United States. Army. Corps of Engineers
Author: Cecil D. Burns