Author: Andrew G. Beacher
Publisher:
ISBN:
Category : Road work zones
Languages : en
Pages : 76
Book Description
Several alternative lane merge strategies have been proposed in recent years to process vehicles through work zone lane closures more safely and efficiently. Among these is the late merge. With the late merge, drivers are instructed to use all lanes to the merge point and then take turns proceeding through the work zone. Its efficiency has been tested on only a limited basis. The purpose of this project was to determine when, if at all, deployment of the late merge was beneficial. The late merge concept was evaluated by comparing it to the traditional merge using computer simulations and field evaluations. Computer simulations included analysis of 2-to-1, 3-to-1, and 3-to-2 lane closure configurations to determine its impact on throughput and the impact of factors such as free flow speed, demand volume, and percentage of heavy vehicles. Field tests were limited to 2-to-1 lane closures, as recommended by state transportation officials, and examined the impact of treatment type on vehicle throughput, percentage of vehicles in the closed lane, and time in queue. Results of the computer simulations showed the late merge produced a statistically significant increase in throughput volume for only the 3-to-1-lane closure configuration and was beneficial across all factors for this type of closure. For the 2-to-1 and 3-to-2 lane closure configurations, the late merge increased throughput when the percentage of heavy vehicles was large. Field tests showed similar trends with regard to throughput. Although throughput increased, the increase was not statistically significant because of the limited number of heavy vehicles at the site. More drivers were in the closed lane, indicating a response to the late merge signs. Time in queue was also reduced, although the reductions were not statistically significant. The authors conclude that the late merge should be considered for 3-to-1 lane closure configurations but not until a sound methodology for deployment has been developed and tested in the field. For the 2-to-1 and 3-to-2 configurations, the late merge should be implemented only when the percentage of heavy vehicles is at least 20 percent.
Evaluation of the Late Merge Work Zone Traffic Control Strategy
Author: Andrew G. Beacher
Publisher:
ISBN:
Category : Road work zones
Languages : en
Pages : 76
Book Description
Several alternative lane merge strategies have been proposed in recent years to process vehicles through work zone lane closures more safely and efficiently. Among these is the late merge. With the late merge, drivers are instructed to use all lanes to the merge point and then take turns proceeding through the work zone. Its efficiency has been tested on only a limited basis. The purpose of this project was to determine when, if at all, deployment of the late merge was beneficial. The late merge concept was evaluated by comparing it to the traditional merge using computer simulations and field evaluations. Computer simulations included analysis of 2-to-1, 3-to-1, and 3-to-2 lane closure configurations to determine its impact on throughput and the impact of factors such as free flow speed, demand volume, and percentage of heavy vehicles. Field tests were limited to 2-to-1 lane closures, as recommended by state transportation officials, and examined the impact of treatment type on vehicle throughput, percentage of vehicles in the closed lane, and time in queue. Results of the computer simulations showed the late merge produced a statistically significant increase in throughput volume for only the 3-to-1-lane closure configuration and was beneficial across all factors for this type of closure. For the 2-to-1 and 3-to-2 lane closure configurations, the late merge increased throughput when the percentage of heavy vehicles was large. Field tests showed similar trends with regard to throughput. Although throughput increased, the increase was not statistically significant because of the limited number of heavy vehicles at the site. More drivers were in the closed lane, indicating a response to the late merge signs. Time in queue was also reduced, although the reductions were not statistically significant. The authors conclude that the late merge should be considered for 3-to-1 lane closure configurations but not until a sound methodology for deployment has been developed and tested in the field. For the 2-to-1 and 3-to-2 configurations, the late merge should be implemented only when the percentage of heavy vehicles is at least 20 percent.
Publisher:
ISBN:
Category : Road work zones
Languages : en
Pages : 76
Book Description
Several alternative lane merge strategies have been proposed in recent years to process vehicles through work zone lane closures more safely and efficiently. Among these is the late merge. With the late merge, drivers are instructed to use all lanes to the merge point and then take turns proceeding through the work zone. Its efficiency has been tested on only a limited basis. The purpose of this project was to determine when, if at all, deployment of the late merge was beneficial. The late merge concept was evaluated by comparing it to the traditional merge using computer simulations and field evaluations. Computer simulations included analysis of 2-to-1, 3-to-1, and 3-to-2 lane closure configurations to determine its impact on throughput and the impact of factors such as free flow speed, demand volume, and percentage of heavy vehicles. Field tests were limited to 2-to-1 lane closures, as recommended by state transportation officials, and examined the impact of treatment type on vehicle throughput, percentage of vehicles in the closed lane, and time in queue. Results of the computer simulations showed the late merge produced a statistically significant increase in throughput volume for only the 3-to-1-lane closure configuration and was beneficial across all factors for this type of closure. For the 2-to-1 and 3-to-2 lane closure configurations, the late merge increased throughput when the percentage of heavy vehicles was large. Field tests showed similar trends with regard to throughput. Although throughput increased, the increase was not statistically significant because of the limited number of heavy vehicles at the site. More drivers were in the closed lane, indicating a response to the late merge signs. Time in queue was also reduced, although the reductions were not statistically significant. The authors conclude that the late merge should be considered for 3-to-1 lane closure configurations but not until a sound methodology for deployment has been developed and tested in the field. For the 2-to-1 and 3-to-2 configurations, the late merge should be implemented only when the percentage of heavy vehicles is at least 20 percent.
Efficient Transportation and Pavement Systems: Characterization, Mechanisms, Simulation, and Modeling
Author: Imad L. Al-Qadi
Publisher: CRC Press
ISBN: 0203881206
Category : Technology & Engineering
Languages : en
Pages : 926
Book Description
Internationally, significant attention is given to transport sustainability including planning, design, construction, evaluation, safety and durability of the road system. The 4th International Gulf Conference on Roads: Efficient Transportation and Pavement Systems - Characterization, Mechanisms, Simulation, and Modeling, hosted by the University o
Publisher: CRC Press
ISBN: 0203881206
Category : Technology & Engineering
Languages : en
Pages : 926
Book Description
Internationally, significant attention is given to transport sustainability including planning, design, construction, evaluation, safety and durability of the road system. The 4th International Gulf Conference on Roads: Efficient Transportation and Pavement Systems - Characterization, Mechanisms, Simulation, and Modeling, hosted by the University o
Guidelines for Design and Operation of Nighttime Traffic Control for Highway Maintenance and Construction
Author: James E. Bryden
Publisher: Transportation Research Board
ISBN: 0309067650
Category : Automobile driving at night
Languages : en
Pages : 131
Book Description
Publisher: Transportation Research Board
ISBN: 0309067650
Category : Automobile driving at night
Languages : en
Pages : 131
Book Description
Work Zone Operations Best Practices Guidebook
Author: U.s. Department of Transportation
Publisher: CreateSpace
ISBN: 9781508569206
Category : Transportation
Languages : en
Pages : 294
Book Description
This Work Zone Best Practices Guidebook provides an easily accessible compilation of work zone operations practices used and recommended by various States and localities around the country. The Guidebook is a reference document that can be updated with new approaches, technologies, and practices for effectively managing work zones and reducing the impacts of work zones on mobility and safety as they are identified. The best practices are descriptive, not prescriptive. They describe approaches that have been successfully used by transportation agencies, along with contact information to find out more from the agency using the practice. Each organization must determine which of these practices are best suited for its particular situation, considering all the site-specific factors that affect work zone operations.
Publisher: CreateSpace
ISBN: 9781508569206
Category : Transportation
Languages : en
Pages : 294
Book Description
This Work Zone Best Practices Guidebook provides an easily accessible compilation of work zone operations practices used and recommended by various States and localities around the country. The Guidebook is a reference document that can be updated with new approaches, technologies, and practices for effectively managing work zones and reducing the impacts of work zones on mobility and safety as they are identified. The best practices are descriptive, not prescriptive. They describe approaches that have been successfully used by transportation agencies, along with contact information to find out more from the agency using the practice. Each organization must determine which of these practices are best suited for its particular situation, considering all the site-specific factors that affect work zone operations.
APTIKOM Journal on Computer Science and Information Technologies (CSIT) Vol. 5 No. 1 March 2020
Author: APTIKOM Journal on Computer Science and Information Technologies (CSIT)
Publisher: IAIC BANGUN BANGSA
ISBN:
Category : Computers
Languages : en
Pages :
Book Description
CSIT (APTIKOM Journal on Computer Science and Information Technologies) Published by APTIKOM & Organized by Aptikom Publisher and Pandawan. CSIT is published three a year, every March, July, and November.
Publisher: IAIC BANGUN BANGSA
ISBN:
Category : Computers
Languages : en
Pages :
Book Description
CSIT (APTIKOM Journal on Computer Science and Information Technologies) Published by APTIKOM & Organized by Aptikom Publisher and Pandawan. CSIT is published three a year, every March, July, and November.
A Highway Work Zone Design and Traffic Management Decision System
Roadside Design Guide
Author:
Publisher: Amer Assn of State Hwy
ISBN: 9781560510314
Category : Bridge railings
Languages : en
Pages : 352
Book Description
This document presents a synthesis of current information and operating practices related to roadside safety and is developed in metric units. The roadside is defined as that area beyond the traveled way (driving lanes) and the shoulder (if any) of the roadway itself. The focus of this guide is on safety treatments that minimize the likelihood of serious injuries when a driver runs off the road. This guide replaces the 1989 AASHTO "Roadside Design Guide."
Publisher: Amer Assn of State Hwy
ISBN: 9781560510314
Category : Bridge railings
Languages : en
Pages : 352
Book Description
This document presents a synthesis of current information and operating practices related to roadside safety and is developed in metric units. The roadside is defined as that area beyond the traveled way (driving lanes) and the shoulder (if any) of the roadway itself. The focus of this guide is on safety treatments that minimize the likelihood of serious injuries when a driver runs off the road. This guide replaces the 1989 AASHTO "Roadside Design Guide."
Roundabouts
Author: Lee August Rodegerdts
Publisher: Transportation Research Board
ISBN: 0309155118
Category : Technology & Engineering
Languages : en
Pages : 407
Book Description
TRB's National Cooperative Highway Research Program (NCHRP) Report 672: Roundabouts: An Informational Guide - Second Edition explores the planning, design, construction, maintenance, and operation of roundabouts. The report also addresses issues that may be useful in helping to explain the trade-offs associated with roundabouts. This report updates the U.S. Federal Highway Administration's Roundabouts: An Informational Guide, based on experience gained in the United States since that guide was published in 2000.
Publisher: Transportation Research Board
ISBN: 0309155118
Category : Technology & Engineering
Languages : en
Pages : 407
Book Description
TRB's National Cooperative Highway Research Program (NCHRP) Report 672: Roundabouts: An Informational Guide - Second Edition explores the planning, design, construction, maintenance, and operation of roundabouts. The report also addresses issues that may be useful in helping to explain the trade-offs associated with roundabouts. This report updates the U.S. Federal Highway Administration's Roundabouts: An Informational Guide, based on experience gained in the United States since that guide was published in 2000.
International Conference on Transportation Engineering, 2009
Author:
Publisher: La Fontaine de Siloë
ISBN: 9780784410394
Category : Transportation engineering
Languages : en
Pages : 988
Book Description
Publisher: La Fontaine de Siloë
ISBN: 9780784410394
Category : Transportation engineering
Languages : en
Pages : 988
Book Description
Advances in Human Aspects of Transportation: Part I
Author: Neville Stanton
Publisher: AHFE International (USA)
ISBN: 149512097X
Category :
Languages : en
Pages : 599
Book Description
Human Factors and Ergonomics have made a considerable contribution to the research, design, development, operation and analysis of transportation systems which includes road and rail vehicles and their complementary infrastructure, aviation and maritime transportation. This book presents recent advances in the Human Factors aspects of Transportation. These advances include accident analysis, automation of vehicles, comfort, distraction of drivers (understanding of distraction and how to avoid it), environmental concerns, in-vehicle systems design, intelligent transport systems, methodological developments, new systems and technology, observational and case studies, safety, situation awareness, skill development and training, warnings and workload. This book brings together the most recent human factors work in the transportation domain, including empirical research, human performance and other types of modeling, analysis, and development. The issues facing engineers, scientists, and other practitioners of human factors in transportation research are becoming more challenging and more critical. The common theme across these sections is that they deal with the intersection of the human and the system. Moreover, many of the chapter topics cross section boundaries, for instance by focusing on function allocation in NextGen or on the safety benefits of a tower controller tool. This is in keeping with the systemic nature of the problems facing human factors experts in rail and road, aviation and maritime research– it is becoming increasingly important to view problems not as isolated issues that can be extracted from the system environment, but as embedded issues that can only be understood as a part of an overall system.
Publisher: AHFE International (USA)
ISBN: 149512097X
Category :
Languages : en
Pages : 599
Book Description
Human Factors and Ergonomics have made a considerable contribution to the research, design, development, operation and analysis of transportation systems which includes road and rail vehicles and their complementary infrastructure, aviation and maritime transportation. This book presents recent advances in the Human Factors aspects of Transportation. These advances include accident analysis, automation of vehicles, comfort, distraction of drivers (understanding of distraction and how to avoid it), environmental concerns, in-vehicle systems design, intelligent transport systems, methodological developments, new systems and technology, observational and case studies, safety, situation awareness, skill development and training, warnings and workload. This book brings together the most recent human factors work in the transportation domain, including empirical research, human performance and other types of modeling, analysis, and development. The issues facing engineers, scientists, and other practitioners of human factors in transportation research are becoming more challenging and more critical. The common theme across these sections is that they deal with the intersection of the human and the system. Moreover, many of the chapter topics cross section boundaries, for instance by focusing on function allocation in NextGen or on the safety benefits of a tower controller tool. This is in keeping with the systemic nature of the problems facing human factors experts in rail and road, aviation and maritime research– it is becoming increasingly important to view problems not as isolated issues that can be extracted from the system environment, but as embedded issues that can only be understood as a part of an overall system.