Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The Caustic-Side Solvent Extraction (CSSX) process has been selected for the separation of cesium from Savannah River Site high-level waste. The solvent composition used in the CSSX process was recently optimized so that the solvent is no longer supersaturated with respect to the calixarene crown ether extractant. Hydraulic performance and mass transfer efficiency testing of a single stage of 5.5-cm ORNL-designed centrifugal contactor has been performed for the CSSX process with the optimized solvent. Maximum throughputs of the 5.5-cm centrifugal contactor, as a function of contactor rotor speed, have been measured for the extraction, scrub, strip, and wash sections of the CSSX flowsheet at the baseline organic/aqueous flow ratios (O/A) of the process, as well as at O/A's 20% higher and 20% lower than the baseline. Maximum throughputs are comparable to the design throughput of the contactor, as well as with throughputs obtained previously in a 5-cm centrifugal contactor with the non-optimized CSSX solvent formulation. The 20% variation in O/A had minimal effect on contactor throughput. Additionally, mass transfer efficiencies have been determined for the extraction and strip sections of the flowsheet. Efficiencies were lower than the process goal of greater than or equal to 80%, ranging from 72 to 75% for the extraction section and from 36 to 60% in the strip section. Increasing the mixing intensity and/or the solution level in the mixing zone of the centrifugal contactor (residence time) could potentially increase efficiencies. Several methods are available to accomplish this including (1) increasing the size of the opening in the bottom of the rotor, resulting in a contactor which is partially pumping instead of fully pumping, (2) decreasing the number of vanes in the contactor, (3) increasing the vane height, or (4) adding vanes on the rotor and baffles on the housing of the contactor. The low efficiency results obtained stress the importance of proper design of a centrifugal contactor for use in the CSSX process. A prototype of any centrifugal contactors designed for future pilot-scale or full-scale processing should be thoroughly tested prior to implementation.
Evaluation of the Hydraulic Capacity and Mass Transfer Efficiency of the CSSX Process with the Optimized Solvent in a Single Stage of 5.5-cm-Diameter Centrifugal Contactor
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The Caustic-Side Solvent Extraction (CSSX) process has been selected for the separation of cesium from Savannah River Site high-level waste. The solvent composition used in the CSSX process was recently optimized so that the solvent is no longer supersaturated with respect to the calixarene crown ether extractant. Hydraulic performance and mass transfer efficiency testing of a single stage of 5.5-cm ORNL-designed centrifugal contactor has been performed for the CSSX process with the optimized solvent. Maximum throughputs of the 5.5-cm centrifugal contactor, as a function of contactor rotor speed, have been measured for the extraction, scrub, strip, and wash sections of the CSSX flowsheet at the baseline organic/aqueous flow ratios (O/A) of the process, as well as at O/A's 20% higher and 20% lower than the baseline. Maximum throughputs are comparable to the design throughput of the contactor, as well as with throughputs obtained previously in a 5-cm centrifugal contactor with the non-optimized CSSX solvent formulation. The 20% variation in O/A had minimal effect on contactor throughput. Additionally, mass transfer efficiencies have been determined for the extraction and strip sections of the flowsheet. Efficiencies were lower than the process goal of greater than or equal to 80%, ranging from 72 to 75% for the extraction section and from 36 to 60% in the strip section. Increasing the mixing intensity and/or the solution level in the mixing zone of the centrifugal contactor (residence time) could potentially increase efficiencies. Several methods are available to accomplish this including (1) increasing the size of the opening in the bottom of the rotor, resulting in a contactor which is partially pumping instead of fully pumping, (2) decreasing the number of vanes in the contactor, (3) increasing the vane height, or (4) adding vanes on the rotor and baffles on the housing of the contactor. The low efficiency results obtained stress the importance of proper design of a centrifugal contactor for use in the CSSX process. A prototype of any centrifugal contactors designed for future pilot-scale or full-scale processing should be thoroughly tested prior to implementation.
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The Caustic-Side Solvent Extraction (CSSX) process has been selected for the separation of cesium from Savannah River Site high-level waste. The solvent composition used in the CSSX process was recently optimized so that the solvent is no longer supersaturated with respect to the calixarene crown ether extractant. Hydraulic performance and mass transfer efficiency testing of a single stage of 5.5-cm ORNL-designed centrifugal contactor has been performed for the CSSX process with the optimized solvent. Maximum throughputs of the 5.5-cm centrifugal contactor, as a function of contactor rotor speed, have been measured for the extraction, scrub, strip, and wash sections of the CSSX flowsheet at the baseline organic/aqueous flow ratios (O/A) of the process, as well as at O/A's 20% higher and 20% lower than the baseline. Maximum throughputs are comparable to the design throughput of the contactor, as well as with throughputs obtained previously in a 5-cm centrifugal contactor with the non-optimized CSSX solvent formulation. The 20% variation in O/A had minimal effect on contactor throughput. Additionally, mass transfer efficiencies have been determined for the extraction and strip sections of the flowsheet. Efficiencies were lower than the process goal of greater than or equal to 80%, ranging from 72 to 75% for the extraction section and from 36 to 60% in the strip section. Increasing the mixing intensity and/or the solution level in the mixing zone of the centrifugal contactor (residence time) could potentially increase efficiencies. Several methods are available to accomplish this including (1) increasing the size of the opening in the bottom of the rotor, resulting in a contactor which is partially pumping instead of fully pumping, (2) decreasing the number of vanes in the contactor, (3) increasing the vane height, or (4) adding vanes on the rotor and baffles on the housing of the contactor. The low efficiency results obtained stress the importance of proper design of a centrifugal contactor for use in the CSSX process. A prototype of any centrifugal contactors designed for future pilot-scale or full-scale processing should be thoroughly tested prior to implementation.
Evaluation of the Hydraulic Performance and Mass Transfer Efficiency of the CSSX Process with the Optimized Solvent in a Single Stage of 5.5-Cm Diameter Centrifugal Contactor
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The Caustic-Side Solvent Extraction (CSSX) process has been selected for the separation of cesium from Savannah River Site high-level waste. The solvent composition used in the CSSX process was recently optimized so that the solvent is no longer supersaturated with respect to the calixarene crown ether extractant. Hydraulic performance and mass transfer efficiency testing of a single stage of 5.5-cm ORNL-designed centrifugal contactor has been performed for the CSSX process with the optimized solvent. Maximum throughputs of the 5.5-cm centrifugal contactor, as a function of contactor rotor speed, have been measured for the extraction, scrub, strip, and wash sections of the CSSX flowsheet at the baseline organic/aqueous flow ratios (O/A) of the process, as well as at O/A's 20% higher and 20% lower than the baseline. Maximum throughputs are comparable to the design throughput of the contactor, as well as with throughputs obtained previously in a 5-cm centrifugal contactor with the non-optimized CSSX solvent formulation. The 20% variation in O/A had minimal effect on contactor throughput. Additionally, mass transfer efficiencies have been determined for the extraction and strip sections of the flowsheet. Efficiencies were lower than the process goal of greater than or equal to 80%, ranging from 72 to 75% for the extraction section and from 36 to 60% in the strip section. Increasing the mixing intensity and/or the solution level in the mixing zone of the centrifugal contactor (residence time) could potentially increase efficiencies. Several methods are available to accomplish this including (1) increasing the size of the opening in the bottom of the rotor, resulting in a contactor which is partially pumping instead of fully pumping, (2) decreasing the number of vanes in the contactor, (3) increasing the vane height, or (4) adding vanes on the rotor and baffles on the housing of the contactor. The low efficiency results obtained stress the importance of proper design of a centrifugal contactor for use in the CSSX process. A prototype of any centrifugal contactors designed for future pilot-scale or full-scale processing should be thoroughly tested prior to implementation.
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The Caustic-Side Solvent Extraction (CSSX) process has been selected for the separation of cesium from Savannah River Site high-level waste. The solvent composition used in the CSSX process was recently optimized so that the solvent is no longer supersaturated with respect to the calixarene crown ether extractant. Hydraulic performance and mass transfer efficiency testing of a single stage of 5.5-cm ORNL-designed centrifugal contactor has been performed for the CSSX process with the optimized solvent. Maximum throughputs of the 5.5-cm centrifugal contactor, as a function of contactor rotor speed, have been measured for the extraction, scrub, strip, and wash sections of the CSSX flowsheet at the baseline organic/aqueous flow ratios (O/A) of the process, as well as at O/A's 20% higher and 20% lower than the baseline. Maximum throughputs are comparable to the design throughput of the contactor, as well as with throughputs obtained previously in a 5-cm centrifugal contactor with the non-optimized CSSX solvent formulation. The 20% variation in O/A had minimal effect on contactor throughput. Additionally, mass transfer efficiencies have been determined for the extraction and strip sections of the flowsheet. Efficiencies were lower than the process goal of greater than or equal to 80%, ranging from 72 to 75% for the extraction section and from 36 to 60% in the strip section. Increasing the mixing intensity and/or the solution level in the mixing zone of the centrifugal contactor (residence time) could potentially increase efficiencies. Several methods are available to accomplish this including (1) increasing the size of the opening in the bottom of the rotor, resulting in a contactor which is partially pumping instead of fully pumping, (2) decreasing the number of vanes in the contactor, (3) increasing the vane height, or (4) adding vanes on the rotor and baffles on the housing of the contactor. The low efficiency results obtained stress the importance of proper design of a centrifugal contactor for use in the CSSX process. A prototype of any centrifugal contactors designed for future pilot-scale or full-scale processing should be thoroughly tested prior to implementation.
Processing of Heavy Crude Oils
Author: Ramasamy Marappa Gounder
Publisher:
ISBN: 1839684097
Category :
Languages : en
Pages : 274
Book Description
Publisher:
ISBN: 1839684097
Category :
Languages : en
Pages : 274
Book Description
Chemical Engineering Design
Author: Gavin Towler
Publisher: Elsevier
ISBN: 0080966608
Category : Technology & Engineering
Languages : en
Pages : 1321
Book Description
Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Publisher: Elsevier
ISBN: 0080966608
Category : Technology & Engineering
Languages : en
Pages : 1321
Book Description
Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Liquid Biphasic System
Author: Pau Loke Show
Publisher: Elsevier
ISBN: 0128223987
Category : Technology & Engineering
Languages : en
Pages : 330
Book Description
Downstream bioprocesses have a significant role to play in the creation of a sustainable bio-based economy, enabling the creation of new products and systems from the more sustainable bioprocessing of natural products. Liquid Biphasic System: Fundamentals, Methods, and Applications in Bioseparation Technology explores in detail the fundamental processes and applications of this new separation system, aiding understanding of the basic principles of the technique and offering constructive criticisms on the latest findings.Including coverage of the background, principles, mechanisms, and applications, Liquid Biphasic System addresses how to adapt the technology for the purification of useful compounds with greater cost efficiency and greener processing. It is essential reading for bioprocess engineers, biochemical engineers, biosystem engineers, chemists and microbiologists working in the fields of bioprocessing. Researchers, scientists, and engineers concerned with the selection and evaluation of alternative bioseparation processes will find the book particularly useful. - Provides information and examples of advanced separations in a single source - Includes detailed descriptions of novel bioseparation systems - Covers the latest technologies related to advanced liquid–liquid separation and their applications in various industries
Publisher: Elsevier
ISBN: 0128223987
Category : Technology & Engineering
Languages : en
Pages : 330
Book Description
Downstream bioprocesses have a significant role to play in the creation of a sustainable bio-based economy, enabling the creation of new products and systems from the more sustainable bioprocessing of natural products. Liquid Biphasic System: Fundamentals, Methods, and Applications in Bioseparation Technology explores in detail the fundamental processes and applications of this new separation system, aiding understanding of the basic principles of the technique and offering constructive criticisms on the latest findings.Including coverage of the background, principles, mechanisms, and applications, Liquid Biphasic System addresses how to adapt the technology for the purification of useful compounds with greater cost efficiency and greener processing. It is essential reading for bioprocess engineers, biochemical engineers, biosystem engineers, chemists and microbiologists working in the fields of bioprocessing. Researchers, scientists, and engineers concerned with the selection and evaluation of alternative bioseparation processes will find the book particularly useful. - Provides information and examples of advanced separations in a single source - Includes detailed descriptions of novel bioseparation systems - Covers the latest technologies related to advanced liquid–liquid separation and their applications in various industries
Pneumatic Handbook
Author: A. Barber
Publisher: Elsevier
ISBN: 008051412X
Category : Science
Languages : en
Pages : 693
Book Description
Accepted as the standard reference work on modern pneumatic and compressed air engineering, the new edition of this handbook has been completely revised, extended and updated to provide essential up-to-date reference material for engineers, designers, consultants and users of fluid systems.
Publisher: Elsevier
ISBN: 008051412X
Category : Science
Languages : en
Pages : 693
Book Description
Accepted as the standard reference work on modern pneumatic and compressed air engineering, the new edition of this handbook has been completely revised, extended and updated to provide essential up-to-date reference material for engineers, designers, consultants and users of fluid systems.
Recent Advances in Mechanical Engineering
Author: Anil Kumar
Publisher: Springer Nature
ISBN: 9811596786
Category : Science
Languages : en
Pages : 1134
Book Description
This book presents the select proceedings of the second International Conference on Recent Advances in Mechanical Engineering (RAME 2020). The topics covered include aerodynamics and fluid mechanics, automation, automotive engineering, composites, ceramics and polymers processing, computational mechanics, failure and fracture mechanics, friction, tribology and surface engineering, heating and ventilation, air conditioning system, industrial engineering, IC engines, turbomachinery and alternative fuels, machinability and formability of materials, mechanisms and machines, metrology and computer-aided inspection, micro- and nano-mechanics, modelling, simulation and optimization, product design and development, rapid manufacturing technologies and prototyping, solid mechanics and structural mechanics, thermodynamics and heat transfer, traditional and non-traditional machining processes, vibration and acoustics. The book also discusses various energy-efficient renewable and non-renewable resources and technologies, strategies and technologies for sustainable development and energy & environmental interaction. The book is a valuable reference for beginners, researchers, and professionals interested in sustainable construction and allied fields.
Publisher: Springer Nature
ISBN: 9811596786
Category : Science
Languages : en
Pages : 1134
Book Description
This book presents the select proceedings of the second International Conference on Recent Advances in Mechanical Engineering (RAME 2020). The topics covered include aerodynamics and fluid mechanics, automation, automotive engineering, composites, ceramics and polymers processing, computational mechanics, failure and fracture mechanics, friction, tribology and surface engineering, heating and ventilation, air conditioning system, industrial engineering, IC engines, turbomachinery and alternative fuels, machinability and formability of materials, mechanisms and machines, metrology and computer-aided inspection, micro- and nano-mechanics, modelling, simulation and optimization, product design and development, rapid manufacturing technologies and prototyping, solid mechanics and structural mechanics, thermodynamics and heat transfer, traditional and non-traditional machining processes, vibration and acoustics. The book also discusses various energy-efficient renewable and non-renewable resources and technologies, strategies and technologies for sustainable development and energy & environmental interaction. The book is a valuable reference for beginners, researchers, and professionals interested in sustainable construction and allied fields.
Dorland's Dictionary of Medical Acronyms and Abbreviations
Author: Dorland
Publisher: Elsevier Health Sciences
ISBN: 0323442544
Category : Medical
Languages : en
Pages : 481
Book Description
Medical acronyms and abbreviations offer convenience, but those countless shortcuts can often be confusing. Now a part of the popular Dorland's suite of products, this reference features thousands of terms from across various medical specialties. Its alphabetical arrangement makes for quick reference, and expanded coverage of symbols ensures they are easier to find. Effective communication plays an important role in all medical settings, so turn to this trusted volume for nearly any medical abbreviation you might encounter. - Symbols section makes it easier to locate unusual or seldom-used symbols. - Convenient alphabetical format allows you to find the entry you need more intuitively. - More than 90,000 entries and definitions. - Many new and updated entries including terminology in expanding specialties, such as Nursing; Physical, Occupational, and Speech Therapies; Transcription and Coding; Computer and Technical Fields. - New section on abbreviations to avoid, including Joint Commission abbreviations that are not to be used. - Incorporates updates suggested by the Institute for Safe Medication Practices (ISMP).
Publisher: Elsevier Health Sciences
ISBN: 0323442544
Category : Medical
Languages : en
Pages : 481
Book Description
Medical acronyms and abbreviations offer convenience, but those countless shortcuts can often be confusing. Now a part of the popular Dorland's suite of products, this reference features thousands of terms from across various medical specialties. Its alphabetical arrangement makes for quick reference, and expanded coverage of symbols ensures they are easier to find. Effective communication plays an important role in all medical settings, so turn to this trusted volume for nearly any medical abbreviation you might encounter. - Symbols section makes it easier to locate unusual or seldom-used symbols. - Convenient alphabetical format allows you to find the entry you need more intuitively. - More than 90,000 entries and definitions. - Many new and updated entries including terminology in expanding specialties, such as Nursing; Physical, Occupational, and Speech Therapies; Transcription and Coding; Computer and Technical Fields. - New section on abbreviations to avoid, including Joint Commission abbreviations that are not to be used. - Incorporates updates suggested by the Institute for Safe Medication Practices (ISMP).
Handbook of Olive Oil: Analysis and Properties
Author: Ramon Aparicio
Publisher: Springer Science & Business Media
ISBN: 1475753713
Category : Technology & Engineering
Languages : en
Pages : 624
Book Description
This new olive oil handbook provides a wealth of detail about the analysis and properties of olives and their oil. It covers technological aspects and biochemistry, a description of detailed techniques, and an analysis of olive oil from the standpoint of general methodology.
Publisher: Springer Science & Business Media
ISBN: 1475753713
Category : Technology & Engineering
Languages : en
Pages : 624
Book Description
This new olive oil handbook provides a wealth of detail about the analysis and properties of olives and their oil. It covers technological aspects and biochemistry, a description of detailed techniques, and an analysis of olive oil from the standpoint of general methodology.
Wärtsilä Encyclopedia of Ship Technology
Author:
Publisher:
ISBN: 9789529355365
Category : Marine engineering
Languages : en
Pages : 663
Book Description
Publisher:
ISBN: 9789529355365
Category : Marine engineering
Languages : en
Pages : 663
Book Description