Author: Emad Ahmed ElrafiePublisher:
ISBN:
Category :
Languages : en
Pages : 384
Book Description
Evaluation of Horizontal Wells with Transverse Hydraulic Fractures in a Layered Multi-phase Reservoir
Author: Emad Ahmed ElrafieModeling of Multi-Stage Fractured Horizontal Wells
Author: Shanshan YaoComputational Fluid Dynamic Analysis in High Permeability Hydraulic Fractured Horizontal Gas Wells
Author: Hrithu VasudevanPublisher:
ISBN:
Category : Computational fluid dynamics
Languages : en
Pages : 104
Book Description
"Hydraulic fracturing of horizontal wells in unconventional reservoirs has become the dominant type of well completion performed in the United States. In very low permeability reservoirs (~.00001-.0001 mD), the wellbore is aligned with the minimum horizontal stress, and the completion includes multiple transverse fractures. These fractures may be placed with either open hole sleeve type completion systems (OHMS), or cased hole plug and perf systems (P-n-P). In slightly higher permeability reservoirs (1 to 10 mD) multiple longitudinal fractures have been found to be preferred to completions with transverse fractures. This study presents an evaluation of gas well productivity for both transverse and longitudinal fractured horizontal wells using CFD simulations. The first part of the work includes an evaluation of one and two transverse fractures, over reservoir permeability of 1, 10 and 100 mD. Results, given as fold of increase, are compared to the single transverse fracture model of Augustine (2011). The work includes a parametric study of fracture width, penetration ratio and vertical to horizontal permeability ratio on production rates. The second part of the study includes CFD simulations for a single longitudinal fracture, and compares productivity results of this fracture orientation to transverse fractures in the 1, 10 and 100 mD cases. Results of this study suggest OHMs completions outperform P-n-P completions. The results of the work also corroborate the findings of Yang (2015) and Kassim et al (2016) suggesting that longitudinal fractured wells perform better in the slightly higher permeability reservoirs (1-10 mD)"--Abstract, page iii.
Unconventional Reservoir Geomechanics
Author: Mark D. ZobackPublisher: Cambridge University Press
ISBN: 1107087074
Category : Business & Economics
Languages : en
Pages : 495
Book Description
A comprehensive overview of the key geologic, geomechanical and engineering principles that govern the development of unconventional oil and gas reservoirs. Covering hydrocarbon-bearing formations, horizontal drilling, reservoir seismology and environmental impacts, this is an invaluable resource for geologists, geophysicists and reservoir engineers.
Modeling Performance of Horizontal Wells with Multiple Fractures in Tight Gas Reservoirs
Author: Guangwei DongPublisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Multiple transverse fracturing along a horizontal well is a relatively new technology that is designed to increase well productivity by increasing the contact between the reservoir and the wellbore. For multiple transverse fractures, the performance of the well system is determined by three aspects: the inflow from the reservoir to the fracture, the flow from the fracture to the wellbore, and the inflow from the reservoir to the horizontal wellbore. These three aspects influence each other and combined, influence the wellbore outflow. In this study, we develop a model to effectively formulate the inter-relationships of a multi-fracture system. This model includes a reservoir model and a wellbore model. The reservoir model is established to calculate both independent and inter-fracture productivity index to quantify the contribution from all fractures on pressure drop of each fracture, by using the source functions to solve the single-phase gas reservoir flow model. The wellbore model is used to calculate the pressure distribution along the wellbore and the relationship of pressure between neighboring fractures, based on the basic pressure drop model derived from the mechanical energy balance. A set of equations with exactly the same number of fractures will be formed to model the system by integrating the two models. Because the equations are nonlinear, iteration method is used to solve them. With our integrated reservoir and wellbore model, we conduct a field study to find the best strategy to develop the field by hydraulic fracturing. The influence of reservoir size, horizontal and vertical permeability, well placement, and fracture orientation, type (longitudinal and transverse), number and distribution are completely examined in this study. For any specific field, a rigorous step-by-step procedure is proposed to optimize the field.
Performance Comparison of Transverse and Longitudinal Fractured Horizontal Wells Over Varied Reservoir Permeability
Author: Fen YangPublisher:
ISBN:
Category : Gas reservoirs
Languages : en
Pages : 164
Book Description
"Since the first application in the mid-1980's, multiple fractured horizontal wells have proven to be an effective means of extracting hydrocarbons. These wells require careful consideration of wellbore orientation relative to the horizontal principle stress. Wellbore orientation can lead to transverse fractures which are perpendicular to the wellbore, or longitudinal fractures parallel the wellbore. Questions arise regarding whether one fracture orientation is consistently preferred over the other, or if certain conditions affect the choice. Historical work has examined the impact of horizontal wellbore azimuth in the Barnett and Marcellus Shale where public data was reviewed and statistical well analysis was conducted respectively. Comparison between transverse and longitudinal fracturing in moderate gas reservoirs has been performed with experimental study. This work includes both simulations and actual field cases studies. It compares transverse multiple fractured horizontal wells with longitudinal ones in terms of both well performance and economics. The study covers both gas and oil reservoirs and extends prior work to unconventional resources by extending the reservoir permeability to 0.00005 md. A range of reservoir permeability is identified for the preferable fracture configuration through simulations. Field production history of the Bakken, Barnett, Eagle Ford and Delaware formations are investigated and compared to the simulation results. In addition, this work analyzes the impact of fracture conductivity, lateral length, fracture half-length, completion method and hydrocarbon prices. The conclusions can be used as a reference in decision making on horizontal drilling and hydraulic fracturing for both unconventional and conventional resources"--Abstract, page iii.
Optimization of the Design of Transverse Hydraulic Fractures in Horizontal Wells Placed in Dual Porosity Tight Gas Reservoirs
Author: Seyhan Emre GorucuFracturing Horizontal Wells
Author: Mohamed Y. SolimanPublisher: McGraw Hill Professional
ISBN: 125958562X
Category : Technology & Engineering
Languages : en
Pages : 480
Book Description
Effectively Apply Modern Fracturing Methods in Horizontal Wells Improve productivity and maximize natural gas extraction using the practical information contained in this comprehensive guide. Written by world-renowned experts, Fracturing Horizontal Wells features complete details on the latest fracking tools and technologies. Illustrations, tables, and real-world examples are found throughout. Discover how to handle site selection and testing, build accurate simulations, and efficiently extract energy from horizontal sources, including shale formations. Environmental standards, regulatory compliance, and safety protocols are also included. Fracturing Horizontal Wells covers: • Fracture Stimulation of Horizontal Wells • Transitioning from Vertical to Horizontal Wellbores • Reservoir Engineering Aspects of Horizontal Wells • Reservoir Engineering Aspects of Fractured Horizontal Wells • Fracturing Horizontal Wells: Rock Mechanics Overview • Drilling of Horizontal Wells • Proppant and Proppant Transport • Fracture Diagnostic Testing • Interval Isolation • Horizontal Completion Fracturing Methods and Techniques • Use of Well Logging Measurements and Analysis for Fracturing Design • Fracture Treatment Diagnostics • Environmental Stewardship
Numerical Simulation of Pressure Transient Analysis in Tight Formation and Field Data Categorization and Typical Well Production Data Analysis
Author: Yue ZhuTemperature Prediction Model for Horizontal Well with Multiple Fractures in Shale Reservoir
Author: Nozomu YoshidaPublisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Fracture diagnostics is a key technology for well performance prediction of a horizontal well in a shale reservoir. The combination of multiple fracture diagnostic techniques gives reliable results, and temperature data has potential to provide more reliability on the results. In this work, we show an application of a temperature prediction model for a horizontal well with multiple hydraulic fractures in order to investigate the possibility of evaluating reservoir and hydraulic fracture parameters using temperature data. The model consists of wellbore model and reservoir model. The wellbore model was formulated based on mass, momentum and energy balance. The reservoir flow model was solved by a numerical reservoir simulation, and the reservoir thermal model was formulated by transient energy balance equation considering viscous dissipation heating and temperature variation caused by fluid expansion besides heat conduction and convection. The reservoir flow and reservoir thermal model were coupled with the wellbore model to predict temperature distribution in a horizontal well considering boundary conditions at the contact of reservoir and wellbore. In the reservoir system, primary hydraulic fractures which are transverse to the horizontal well were modeled with thin grid cells explicitly, and the hydraulically-induced fracture network around the horizontal well was modeled as higher permeable zone to unstimulated matrix zone. The reservoir grids between two primary fractures were logarithmically spaced in order to capture transient flow behavior. We applied the model to synthetic examples: horizontal well with identical five fractures and with different five fractures. The results show two fundamental mechanisms: heat conduction between formation and wellbore fluid at non-perforated zone, and wellbore fluid mixing effect at each fracture. The synthetic example with identical fractures shows that fracture locations affect wellbore temperature distribution because of fluid mixing effect between reservoir inflow and wellbore fluid. And also, the synthetic example with different fractures shows that the fracture heterogeneity causes different magnitude of temperature change due to inflow variation per fracture. In addition, the model was applied to synthetic examples without network fracture region in order to find the effects by the network. It reveals that under constant rate condition, network fracture masks large temperature change due to small pressure change at the contact between fracture and formation, and that under constant BHP condition, network fracture augments temperature change with the increase of flow rate in wellbore and inflow rate from reservoir. Sensitivity studies were performed on temperature distribution to identify influential parameters out of the reservoir and hydraulic fracture parameters including reservoir porosity, reservoir permeability, fracture half-length, fracture height, fracture permeability, fracture porosity, fracture network parameters, and fracture interference between multiple clusters. In this work, in order to find contributions by a target fracture, temperature change sensitivity is evaluated. Single fracture case reveals that fracture permeability, network fracture parameters and fracture geometries are primary influential parameters on temperature change at the fracture location. And also, multiple fractures case shows that temperature change is augmented with the increase of fracture geometry and is decreased with the increase of fracture permeability. These results show the possibility of using temperature to determine these sensitive parameters, and also the quantified parameter sensitivities provide better understandings of the temperature behavior of horizontal well with multiple fractures. The electronic version of this dissertation is accessible from http://hdl.handle.net/1969.1/149366