Environmental Control for Plants using Intelligent Control Systems PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Environmental Control for Plants using Intelligent Control Systems PDF full book. Access full book title Environmental Control for Plants using Intelligent Control Systems by Ibrahim A. Hameed. Download full books in PDF and EPUB format.
Author: Ibrahim A. Hameed Publisher: GRIN Verlag ISBN: 3656152608 Category : Computers Languages : en Pages : 152
Book Description
Master's Thesis from the year 2005 in the subject Computer Sciences - Artificial Intelligence, grade: MSc, , course: Intelligent Control, language: English, abstract: [...] In practice, conventional controllers were used to control the system however their parameters are empirically adjusted. Besides, the operation of these controllers relies on the measurements provided by sensors located inside and near the greenhouse. If the information provided by one or several of these sensors is erroneous, the controllers will not operate properly. Similarly, failure of one or several of the actuators to function properly will impair the greenhouse operation. Therefore, an automatic diagnosis system of failures in greenhouses is proposed. The diagnosis system is based on deviations observed between measurements performed in the system and the predictions of a model of the failure-free system. This comparison is done through a bank of fuzzy observers, where each observer becomes active to a specific failure signature and inactive to the other failures. Neural networks are used to develop a model for the failure-free greenhouse. The main objective of this thesis is to explore and develop intelligent control schemes for adjusting the climate inside a greenhouse. The thesis employs the conventional Pseudo- Derivative Feedback (PDF) Controller. It develops the fuzzy PDF controller (FPDF). The thesis also, develops two genetic algorithm (GA) based climatic control schemes, one is genetic PDF (GPDF) and the other is genetic FPDF (GFPDF). The former uses GA to adjust the gains of the Pseudo-Derivative Feedback Controller (GPDF) and the later uses genetic algorithm to optimize the FPDF controller parameters (i.e., scale factors and/or parameters of the membership functions). Finally, the thesis develops a fuzzy neural fault detection and isolation system (FNFDIS), in which a bank of fuzzy observers are designed to detect faults that may occur in the greenhouse end items (e.g.., sensors and actuators). Simulation experiments are performed to test the soundness and capabilities of the developed control schemes for controlling the greenhouse climate. The proposed schemes are tested through two experiments, setpoint tracking test and regulatory control test. Also, the proposed diagnostic system was tested through four experiments. Compared with the results obtained using the conventional controllers, best results have been achieved using the proposed control schemes.
Author: Ibrahim A. Hameed Publisher: GRIN Verlag ISBN: 3656152608 Category : Computers Languages : en Pages : 152
Book Description
Master's Thesis from the year 2005 in the subject Computer Sciences - Artificial Intelligence, grade: MSc, , course: Intelligent Control, language: English, abstract: [...] In practice, conventional controllers were used to control the system however their parameters are empirically adjusted. Besides, the operation of these controllers relies on the measurements provided by sensors located inside and near the greenhouse. If the information provided by one or several of these sensors is erroneous, the controllers will not operate properly. Similarly, failure of one or several of the actuators to function properly will impair the greenhouse operation. Therefore, an automatic diagnosis system of failures in greenhouses is proposed. The diagnosis system is based on deviations observed between measurements performed in the system and the predictions of a model of the failure-free system. This comparison is done through a bank of fuzzy observers, where each observer becomes active to a specific failure signature and inactive to the other failures. Neural networks are used to develop a model for the failure-free greenhouse. The main objective of this thesis is to explore and develop intelligent control schemes for adjusting the climate inside a greenhouse. The thesis employs the conventional Pseudo- Derivative Feedback (PDF) Controller. It develops the fuzzy PDF controller (FPDF). The thesis also, develops two genetic algorithm (GA) based climatic control schemes, one is genetic PDF (GPDF) and the other is genetic FPDF (GFPDF). The former uses GA to adjust the gains of the Pseudo-Derivative Feedback Controller (GPDF) and the later uses genetic algorithm to optimize the FPDF controller parameters (i.e., scale factors and/or parameters of the membership functions). Finally, the thesis develops a fuzzy neural fault detection and isolation system (FNFDIS), in which a bank of fuzzy observers are designed to detect faults that may occur in the greenhouse end items (e.g.., sensors and actuators). Simulation experiments are performed to test the soundness and capabilities of the developed control schemes for controlling the greenhouse climate. The proposed schemes are tested through two experiments, setpoint tracking test and regulatory control test. Also, the proposed diagnostic system was tested through four experiments. Compared with the results obtained using the conventional controllers, best results have been achieved using the proposed control schemes.
Author: A.E. Ruano Publisher: IET ISBN: 0863414893 Category : Computers Languages : en Pages : 478
Book Description
Intelligent Control techniques are becoming important tools in both academia and industry. Methodologies developed in the field of soft-computing, such as neural networks, fuzzy systems and evolutionary computation, can lead to accommodation of more complex processes, improved performance and considerable time savings and cost reductions. Intelligent Control Systems using Computational Intellingence Techniques details the application of these tools to the field of control systems. Each chapter gives and overview of current approaches in the topic covered, with a set of the most important references in the field, and then details the author's approach, examining both the theory and practical applications.
Author: Francisco Rodríguez Publisher: Springer ISBN: 3319111345 Category : Technology & Engineering Languages : en Pages : 275
Book Description
A discussion of challenges related to the modeling and control of greenhouse crop growth, this book presents state-of-the-art answers to those challenges. The authors model the subsystems involved in successful greenhouse control using different techniques and show how the models obtained can be exploited for simulation or control design; they suggest ideas for the development of physical and/or black-box models for this purpose. Strategies for the control of climate- and irrigation-related variables are brought forward. The uses of PID control and feedforward compensators, both widely used in commercial tools, are summarized. The benefits of advanced control techniques—event-based, robust, and predictive control, for example—are used to improve on the performance of those basic methods. A hierarchical control architecture is developed governed by a high-level multiobjective optimization approach rather than traditional constrained optimization and artificial intelligence techniques. Reference trajectories are found for diurnal and nocturnal temperatures (climate-related setpoints) and electrical conductivity (fertirrigation-related setpoints). The objectives are to maximize profit, fruit quality, and water-use efficiency, these being encouraged by current international rules. Illustrative practical results selected from those obtained in an industrial greenhouse during the last eight years are shown and described. The text of the book is complemented by the use of illustrations, tables and real examples which are helpful in understanding the material. Modeling and Control of Greenhouse Crop Growth will be of interest to industrial engineers, academic researchers and graduates from agricultural, chemical, and process-control backgrounds.
Author: Pedro Ponce Publisher: CRC Press ISBN: 1315771551 Category : Science Languages : en Pages : 378
Book Description
This book deals with different types of greenhouses, materials, structures, advanced control techniques and tendencies that are needed for designing and controlling an advanced greenhouse. The control system is presented as an integral system which covers the explanation of basic and advanced concepts for a real time controller. Also, structural analysis is introduced, whereby mechanical design is regarded as a key factor. The book incorporates simulations and experimental results, and utilizes LabVIEW and ADAMS software. Finally, it provides a perspective on the present state and future of greenhouses globally.
Author: B-t Chu Publisher: World Scientific ISBN: 9814520446 Category : Phase space (Statistical physics) Languages : en Pages : 273
Book Description
This volume demonstrates that the key to the modeling, diagnosis and control of the next generation manufacturing processes is to integrate knowledge-based systems with traditional techniques. An up-to-date study is given here of this relatively recent development.The book is for those working primarily with traditional techniques and those working in the knowledge-based systems field. Both sets of readers will find it to be a source of many specific ideas about the integration of knowledge-based systems with traditional techniques, and carrying a wealth of useful references.
Author: Redmond R. Shamshiri Publisher: BoD – Books on Demand ISBN: 183968075X Category : Science Languages : en Pages : 183
Book Description
Modern greenhouse technology has revolutionized the food supply chain scenario over the past 40 years. Closed-field cultivation by means of agri-cubes, plant factories, vertical farming structures, and roof-top solar greenhouses has become the backbone of sustainable agriculture for producing all-year-round fresh fruits and vegetables. This book is an attempt to explore several profound questions such as how digital technology and simulation models have saved energy in commercial greenhouses, and why growers prefer LPWAN sensors and IoT monitoring devices over the traditional timer-based controllers? How artificial intelligence is capable of performing microclimate prediction and control, and what considerations should be taken into account for implementing desiccant evaporative cooling systems? With case-study examples and field experiments, each chapter highlights some of the most recent solutions and adaptation strategies toward improving the efficiency and sustainability of closed-field crop production systems.
Author: Zi-Xing Cai Publisher: World Scientific ISBN: 9789810225643 Category : Technology & Engineering Languages : en Pages : 472
Book Description
Introducton; Methology of knowledge representation; General inference principles; Hierarchical control systems; Expert control systems; Fuzzy control systems; Neurocontrol systems; Learning control systems; Intelligente control systems in application; Prospectives of intelligente control; References; Bibliography; Subject index.
Author: J. De Baerdemaeker Publisher: Elsevier ISBN: 1483296857 Category : Technology & Engineering Languages : en Pages : 331
Book Description
The 1st IFAC/CIGR/EURAENG/ISHS Workshop on Control Applications in Post-Harvest and Processing Technology (CAPPT '95) provides the opportunity to discuss and evaluate the state of the art and application of control methods in storage and processes of agricultural and horticultural products. This publication, generated from the papers at the workshop, provides a detailed assessment of present and future developments of key technologies within the agricultural and horticultural fields.
Author: Thrishantha Nanayakkara Publisher: CRC Press ISBN: 1420079255 Category : Technology & Engineering Languages : en Pages : 441
Book Description
From aeronautics and manufacturing to healthcare and disaster management, systems engineering (SE) now focuses on designing applications that ensure performance optimization, robustness, and reliability while combining an emerging group of heterogeneous systems to realize a common goal. Use SoS to Revolutionize Management of Large Organizations, Factories, and Systems Intelligent Control Systems with an Introduction to System of Systems Engineering integrates the fundamentals of artificial intelligence and systems control in a framework applicable to both simple dynamic systems and large-scale system of systems (SoS). For decades, NASA has used SoS methods, and major manufacturers—including Boeing, Lockheed-Martin, Northrop-Grumman, Raytheon, BAE Systems—now make large-scale systems integration and SoS a key part of their business strategies, dedicating entire business units to this remarkably efficient approach. Simulate Novel Robotic Systems and Applications Transcending theory, this book offers a complete and practical review of SoS and some of its fascinating applications, including: Manipulation of robots through neural-based network control Use of robotic swarms, based on ant colonies, to detect mines Other novel systems in which intelligent robots, trained animals, and humans cooperate to achieve humanitarian objectives Training engineers to integrate traditional systems control theory with soft computing techniques further nourishes emerging SoS technology. With this in mind, the authors address the fundamental precepts at the core of SoS, which uses human heuristics to model complex systems, providing a scientific rationale for integrating independent, complex systems into a single coordinated, stabilized, and optimized one. They provide readers with MATLAB® code, which can be downloaded from the publisher's website to simulate presented results and projects that offer practical, hands-on experience using concepts discussed throughout the book.
Author: Ibrahim A. Hameed
Author: Ibrahim A. Hameed
Author: A.E. Ruano
Author: Francisco Rodríguez
Author: Pedro Ponce
Author: B-t Chu
Author: Redmond R. Shamshiri
Author: Zi-Xing Cai
Author: J. De Baerdemaeker
Author: Thrishantha Nanayakkara
Author: