Author: Marvin H. HirschbergPublisher:
ISBN:
Category :
Languages : en
Pages : 48
Book Description
Elevated Temperature Fatigue Testing of Metals
Author: Marvin H. HirschbergElevated Temperature Fatigue Testing of Metals
Author: National Aeronautics and Space Administration (NASA)Publisher: Createspace Independent Publishing Platform
ISBN: 9781723403859
Category :
Languages : en
Pages : 26
Book Description
The major technology areas needed to perform a life prediction of an aircraft turbine engine hot section component are discussed and the steps required for life prediction are outlined. These include the determination of the operating environment, the calculation of the thermal and mechanical loading of the component, the cyclic stress-strain and creep behavior of the material required for structural analysis, and the structural analysis to determine the local stress-strain-temperature-time response of the material at the critical location in the components. From a knowledge of the fatigue, creep, and failure resistance of the material, a prediction of the life of the component is made. Material characterization and evaluation conducted for the purpose of calculating fatigue crack initiation lives of components operating at elevated temperatures are emphasized. Hirschberg, M. H. Glenn Research Center NASA-TM-82745, E-1058 RTOP 505-33-22
Fatigue at High Temperature
Author: Publisher: ASTM International
ISBN: 9780803100169
Category : Science
Languages : en
Pages : 166
Book Description
Fatigue at Elevated Temperatures
Author: Publisher: ASTM International
ISBN:
Category : Metals
Languages : en
Pages : 804
Book Description
High Temperature Fatigue
Author: R.P. SkeltonPublisher: Springer Science & Business Media
ISBN: 940093453X
Category : Technology & Engineering
Languages : en
Pages : 330
Book Description
About 35 years ago, thermal fatigue was identified as an important phenomenon which limited the lifetime of high temperature plant. In the intervening years many investigations have been carried out, primarily to give guidance on likely endurance (especially in the presence of time dependent deformation) but latterly, with the introduction of sophisticated testing machines, to provide knowledge of the underlying mechanisms of failure. A previous edited book (Fatigue at High Temperature, Elsevier Applied Science Publishers, 1983) summarised the state-of-the-art of high temperature fatigue testing and examined the factors influencing life, such as stress state, environment and microstructural effects. It also considered, in some detail, cyclic crack growth as a more rigorous approach to life limitation. The aim of the present volume (which in style and format follows exactly the same lines as its predecessor) is once again to pursue the desire to translate detailed laboratory knowledge into engineering design and assessment. There is, for example, a need to consider the limitations of the laboratory specimen and its relationship with engineering features. Many design procedures still rely on a simple endurance approach based on failure of a smooth specimen, and this is taken to indicate crack initiation in the component. In this volume, therefore, crack propagation is covered only incidentally, emphasis being placed instead on basic cyclic stress strain properties, non-isothermal behaviour, metallography, failure criteria and the need for agreed testing procedures.
Fatigue at High Temperature
Author: American Society for Testing and MaterialsPublisher: ASTM International
ISBN:
Category : Materials
Languages : en
Pages : 161
Book Description
Elevated Temperature Testing Problem Areas
Author: H. R. VoorheesPublisher: ASTM International
ISBN: 9780803100626
Category : Alloys
Languages : en
Pages : 305
Book Description
Metal Plasticity and Fatigue at High Temperature
Author: Denis BenasciuttiPublisher: MDPI
ISBN: 3039287702
Category : Technology & Engineering
Languages : en
Pages : 220
Book Description
In several industrial fields (such as automotive, steelmaking, aerospace, and fire protection systems) metals need to withstand a combination of cyclic loadings and high temperatures. In this condition, they usually exhibit an amount—more or less pronounced—of plastic deformation, often accompanied by creep or stress-relaxation phenomena. Plastic deformation under the action of cyclic loadings may cause fatigue cracks to appear, eventually leading to failures after a few cycles. In estimating the material strength under such loading conditions, the high-temperature material behavior needs to be considered against cyclic loading and creep, the experimental strength to isothermal/non-isothermal cyclic loadings and, not least of all, the choice and experimental calibration of numerical material models and the selection of the most comprehensive design approach. This book is a series of recent scientific contributions addressing several topics in the field of experimental characterization and physical-based modeling of material behavior and design methods against high-temperature loadings, with emphasis on the correlation between microstructure and strength. Several material types are considered, from stainless steel, aluminum alloys, Ni-based superalloys, spheroidal graphite iron, and copper alloys. The quality of scientific contributions in this book can assist scholars and scientists with their research in the field of metal plasticity, creep, and low-cycle fatigue.
Fatigue at Elevated Temperatures
Author: Effect of Outdoor Exposure at Elevated Temperature on the Fatigue Life of Ti-8Al-1Mo-1V Titanium Alloy and AM 350 Stainless Steel Sheet
Author: Edward P. PhillipsPublisher:
ISBN:
Category : High temperatures
Languages : en
Pages : 36
Book Description